HeatingA, virecnotinladtiitoionnaindg cooling
Seat heating
●
Automatic air recirculation is activated and
If the heating of this seat disconnects auto-
matically, you can switch it on again manually if
necessary, even if the seat is unoccupied.
deactivated in the air conditioning settings
menu. An A will be displayed next to the Clima-
bar’s recirculation icon , indicating that the
function is active.
The front seats have three levels of electric
heating.
Smart heated seat
Control seat heating
This is an smart function that automatically ac-
tivates and regulates the driver and front pas-
senger seat heating for greater comfort.
WARNING
Press the
icon on the Climabar ››› Fig. 113
A
to open the seat heating menu.
Stuꢁy or used air will increase fatigue and re-
duce driver concentration possibly resulting
in a serious accident.
The seat heating for the driver's seat and front
passenger seat can be adjusted separately to
achieve fully personalised comfort.
●
Press the left or right seat icon to connect
the seat heating to maximum power.
●
Never leave the fresh air fan turned oꢁ or
●
Press the left or right seat icon repeatedly
use the air recirculation for long periods of
time; the air in the vehicle interior will not be
refreshed.
until the desired level is adjusted.
To access the smart heated seats function,
the CUPRA CONNECT personalisation service
●
To switch oꢁ seat heating, press the corre-
must ꢀrst be activated ››› page 220.
sponding seat icon several times until no LED is
on.
●
To switch the function on/oꢁ, go to the sub-
NOTICE
menu Settings > Use of the driver/front pas-
●
You can also adjust the seat heating level
senger smart heated seats.
by using two ꢀngers to press the sensor ꢀeld
In vehicles with an air conditioner, do not
smoke when air recirculation is switched on.
The smoke may be deposited on the cooling
evaporator and on the active combination ꢀl-
ter and cause permanent unpleasant odours.
1
2
››› Fig. 113 or
(left or right seat).
The smart heated seats function requires a
period for learning usage habits. Information
about the start of the learning process is
shown in the seat heating submenu on the
Infotainment display. During this process, the
status LEARNINGwill be displayed, and its evo-
lution will also be shown by a progress bar.
If the ignition is switched on again in approx.
the next 10 minutes, the driver seat heating is
automatically turned on to the level set the last
time.
Note
If the passenger leaves his or her seat while
the seat heater and drive system are switched
on, the heating of that seat disconnects auto-
matically. The indication on the infotainment
system turns grey after approx 2 seconds. If
the passenger sits down again while the drive
system is still switched on, the seat heating
switches on again automatically.
When the outside temperature is very high,
brieꢂy switching on the air recirculation
mode helps to cool the vehicle interior more
quickly.
Seat heating level 3 (maximum) needs to be
used to ensure that habits are learned cor-
rectly.
During the learning period, it is advisable to
use the seat heater at diꢁerent outside tem-
peratures to achieve optimum performance of
the smart heated seats.
133