2002-2008 Cupra Born SUV Infotainment system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system for Your Cupra Born SUV First Generation (2002-2008)

Firststeps
Bear in mind that parking lots, tunnels, tall  
buildings, mountains or due to the operation  
of other electrical devices, such as chargers,  
can also interfere with the reception of the ra-  
dio signal.  
Current documentation attached  
Infotainment system  
For using infotainment and its components,  
take into account, together with this instruc-  
tion manual, the following documentation:  
First steps  
●
Supplements to your vehicle’s on-board  
Introduction  
Foils or adhesives with metallic layers on the  
antenna and on the window panes can inter-  
fere with radio reception.  
documentation.  
Infotainment functions and settings depend  
on the country and equipment.  
●
Instruction Manual of the mobile phone de-  
vice or audio sources.  
●
Operating instructions for data media and  
WARNING  
Before ꢀrst use  
external players.  
The infotainment central computer is inter-  
connected with the control units mounted  
on the vehicle. Therefore, there is a serious  
danger of accident and injury if the central  
computer is repaired or disassembled and re-  
assembled incorrectly.  
Before the ꢀrst use, bear in mind the following  
points, to take full advantage of the functions  
and settings oꢁered:  
●
Manuals for the Infotainment accessories  
subsequently installed or used additionally.  
●
Description of services when running CUPRA  
●
Observe the basic safety warnings  
services.  
››› page 231.  
●
Never replace the central computer with  
●
Reset the Infotainment factory settings.  
Safety instructions  
another used, recycled or from another vehi-  
cle at the end of its useful life.  
●
Search and store favourite radio stations on  
Some function areas may include links to third-  
party websites. CUPRA is not the owner of the  
third-party websites accessible through the  
links, and assumes no liability for their content.  
the preset buttons so you can tune them  
quickly.  
●
The repair or disassembly and reassembly  
of the central computer should only be car-  
ried out at specialised workshops. To do so,  
CUPRA recommends going to a specialised  
CUPRA dealer or any SEAT dealership.  
●
Use only suitable audio sources and data  
media.  
Some function areas may include outside in-  
formation from third-party providers. CUPRA  
is not responsible for such information being  
correct, up-to-date or complete, or for ensur-  
ing it does not infringe the rights of third par-  
ties.  
●
Pair a mobile phone to use phone manage-  
ment through the Infotainment system.  
●
●
Use current maps for navigation.  
Register with CUPRA to execute the corre-  
sponding services.  
Radio stations and owners of data media and  
audio sources are responsible for the informa-  
tion they transmit.  
231  
Infotainment system  
WARNING  
WARNING  
WARNING  
Any distraction aꢁecting the driver in any  
way can lead to an accident and cause inju-  
ries. Reading the information on the screen  
and managing the infotainment system can  
distract your attention from traꢁic and cause  
an accident.  
The following circumstances may result in an  
emergency call, phone call or data transmis-  
sion not being made or being interrupted:  
Read and observe the operating instructions  
provided by the manufacturer in question  
when using mobile phone devices, data me-  
dia, external devices, external audio and  
multimedia sources.  
●
When in areas with zero or insuꢁicient mo-  
bile telephony or GPS signal. Also in tunnels,  
conꢀned areas between very tall buildings,  
garages, underpasses, mountains and valleys.  
●
Always drive as carefully and responsibly as  
WARNING  
possible.  
●
When in areas with suꢁicient mobile phone  
When changing or connecting an audio  
or multimedia source may cause sudden  
changes in the volume.  
or GPS signal, the telephony network of  
the telecommunications provider has inter-  
ference or is not available.  
WARNING  
●
Connecting, inserting or removing an audio  
source or data media while driving can dis-  
tract your attention from the traꢁic and  
cause an accident.  
Lower the volume before connecting or  
●
When the vehicle components necessary  
switching to audio or multimedia sources.  
to make emergency calls, phone calls and to  
transmit data are damaged, do not work or  
do not have suꢁicient electrical power.  
WARNING  
●
When the battery of the mobile phone de-  
If mobile phone and radiocommunication  
devices are used without connection to an  
external antenna, the maximum electromag-  
netic radiation levels inside the vehicle might  
be surpassed, thus posing a risk to the health  
of the driver and passengers. This is also the  
case if the external antenna has not been  
correctly installed.  
WARNING  
vice is discharged or its charge level is insuꢁi-  
cient.  
Select volume settings that allow you to  
easily hear signals from outside the vehicle  
at all times (e.g. emergency services sirens).  
WARNING  
●
Hearing may be impaired if using too high a  
volume setting, even if only for short periods  
of time.  
In some countries and some telephone net-  
works it is only possible to make an emer-  
gency call, if a mobile telephone device is  
connected to the telephone interface of the  
vehicle, inside it there is an “unlocked” SIM  
card with suꢁicient balance to make calls and  
with suꢁicient network signal coverage.  
●
Keep a distance of at least 20 centimetres  
between the antennas of the mobile phone  
device and an active medical device, such as  
a pacemaker, as mobile phones might alter  
the functioning of these devices.  
●
Do not carry a mobile phone switched  
on very close or directly on top of an ac-  
tive medical device, for instance in a chest  
pocket.  
232  
Firststeps
WARNING  
●
Immediately turn oꢁ the mobile phone if  
WARNING  
you suspect it is causing interferences in an  
active medical device or any other medical  
device.  
If the light conditions are not good and the  
screen is damaged or dirty, the indications  
and information displayed on the screen may  
not be read or be read incorrectly.  
The driving recommendations and traꢁic in-  
dications shown on the navigation system  
may diꢁer from the current traꢁic situation.  
●
Traꢁic signs, signalling systems, traꢁic reg-  
WARNING  
●
The indications and information displayed  
ulations and local circumstances prevail over  
driving recommendations and navigation  
system indications.  
on the screen should never induce to take  
any risk that compromises safety. The screen  
is not a replacement for driver awareness.  
Mobile phones, external devices and acces-  
sories that are loose or not properly secured  
could move around the passenger compart-  
ment during a sudden driving or braking ma-  
noeuvre or an accident and cause damage or  
injury.  
●
Adapt your speed and driving style to  
suit visibility, weather, road and traꢁic condi-  
tions.  
WARNING  
●
Certain circumstances can signiꢀcantly ini-  
Radio stations can transmit disaster or haz-  
ard announcements. The following condi-  
tions prevent such notices from being re-  
ceived or issued:  
●
Set mobile phone devices, external devices  
tially planned lengthen both the duration of  
the trip and the route to the destination, or  
even temporarily prevent navigation to it, for  
example, if a road is closed to traꢁic.  
and their accessories outside the airbag de-  
ployment areas or store them securely.  
●
Position the connection cables of the au-  
●
When in areas with zero or insuꢁicient ra-  
dio sources and external devices so that they  
do not interfere with the driver.  
dio signal. Also in tunnels, conꢀned areas  
between very tall buildings, garages, under-  
passes, mountains and valleys.  
NOTICE  
In areas where special regulations apply or  
the use of mobile phones is forbidden, the  
mobile device in question must be switched  
oꢁ at all times. The radiation produced by a  
mobile phone device when switched on may  
interfere with sensitive technical and medical  
equipment, possibly resulting in malfunction  
or damage to the equipment.  
WARNING  
●
When the frequency bands of the radio  
station have interference or are not available  
in areas with suꢁicient radio signal reception.  
The centre armrest may obstruct the driver's  
arm movements, which could cause an acci-  
dent and severe injuries.  
●
When the speakers and the vehicle compo-  
nents necessary for radio reception are dam-  
aged, do not work or do not have suꢁicient  
electrical power.  
●
Keep the storage compartments of the  
centre armrest closed at all times while the  
vehicle is in motion.  
NOTICE  
WARNING  
If the playback volume is excessive or distor-  
ted, the speakers may be damaged.  
Switch oꢁ mobile phone devices in areas with  
a risk of explosion!  
233  
Infotainment system  
Overview and controls  
Connect System  
Fig. 162 Overview: control unit  
1
2
5
Touch screen. The infotainment functions  
can be used through the screen.  
Touch zones (to raise and lower the air  
conditioning temperature).  
6
HOME button.  
Touch zones (to raise and lower the vol-  
ume).  
: main menu with widget views.  
: main menu in tile mode.  
3
Direct access button to the assist systems  
and vehicle settings.  
4
On/Oꢁ touchpad (to turn the infotain-  
ment system on/oꢁ).  
234  
Generalinstructionsfor use  
●
For the correct operation of the infotain-  
shop. To do so, CUPRA recommends going to a  
specialised CUPRA dealer or any SEAT dealer-  
ship.  
General instructions for  
use  
ment system it is important that it is switched  
on and that, if necessary, the time and date of  
the vehicle are set correctly.  
●
Using a mobile phone device inside the vehi-  
●
If a function button is missing on the screen,  
cle may cause noise in the speakers.  
Operating indications  
it is not a device defect, but corresponds to the  
speciꢀc equipment of the country or version.  
●
On vehicles with park assist, the audio  
●
The infotainment needs a few seconds for  
source volume is automatically lowered when  
reverse gear is selected. The volume reduction  
can be adjusted.  
the complete start-up of the system and dur-  
ing that time it does not react to inputs. Only  
the image of the rear view camera system can  
be displayed during system start-up.  
●
Some infotainment functions can only be se-  
lected when the vehicle is at a standstill. In  
some countries, the gear selector must also be  
in parking position P or neutral N. This is not  
a malfunction, but is due to compliance with  
legal requirements.  
●
Information about the included software and  
the license conditions can be found in Set-  
●
The display of all indications and the execu-  
tings > Copyright.  
tion of functions only takes place once the in-  
fotainment system has ꢀnished booting. The  
duration of the system booting depends on  
the number of infotainment functions and may  
take longer than normal in the event of very  
high or very low temperatures.  
●
When selling or lending the vehicle, make  
●
Restrictions on the use of devices using  
sure that all saved data, ꢀles and settings have  
been deleted and, if necessary, external audio  
sources and data media have been removed.  
Remember to also restore the factory settings  
to unlink your CUPRA ID username from the  
vehicle, as well as your CUPRA CONNECT  
Gen4 pack.  
Bluetooth® technology may apply in some  
countries. For further information, contact the  
local authorities.  
●
If you disconnect the 12 volt battery, turn on  
●
When using the infotainment system and  
the ignition before restarting the infotainment  
system.  
corresponding accessories, e.g., headphones,  
bear in mind country-speciꢀc regulations and  
legal provisions.  
●
If the setup is changed, this may change the  
Note  
display on the screen and in some cases, the  
infotainment system may behave in a manner  
diꢁerent to that described in this instruction  
manual.  
●
The online navigation, online voice com-  
You will ꢀnd more information and tips for  
using the infotainment system in the Help  
menu.  
mand and Internet Radio functions (among  
others) require the activation of CUPRA CON-  
NECT Gen4 services (linked to the CUPRA  
CONNECT PLUS pack) and an Internet con-  
nection for the vehicle. The data transmission  
must not be limited to perform the functions.  
●
When the drive system is switched oꢁ and  
the charge level of the vehicle’s 12 V battery is  
low, the infotainment system switches oꢁ auto-  
matically.  
HOME screen  
In the control and display unit you can set  
up the views and representation on the home  
screen or use the factory setting templates.  
●
To use the infotainment system, simply lightly  
●
Ensure that any repairs or modiꢀcations that  
press a button or touch the screen.  
need to be carried out on the infotainment  
system are carried out by a specialised work-  
235  
Infotainment system  
If an icon is missing on the screen, it is not a  
device defect, but corresponds to the speciꢀc  
equipment of the country or version.  
Legal  
The infotainment system automatically turns  
oꢁ when the driver's door is opened, provided  
the ignition has been switched oꢁ beforehand.  
Help  
The following menus can be included as an  
icon on the home screen:  
Moving objects and adjusting volume  
Move objects on the screen to adapt settings,  
for example, with scrollable buttons or to move  
the areas of a menu.  
Main menus on the home screen  
Managing the infotainment system  
Navigation ››› page 249  
Execute the functions and settings with the in-  
fotainment controls.  
Depending on the equipment, menus and dis-  
plays can be customised.  
Radio ››› page 242, Media  
Depending on the equipment, the infotain-  
ment system has diꢁerent controls:  
››› page 246  
Increasing and reducing images or map sizes  
Telephone ››› page 257  
●
●
Touch screen.  
Tip: use your thumb and index ꢀnger.  
Touch zones outside the screen, for exam-  
●
Press on the map with both ꢀngers at the  
Full Link ››› page 226  
Settings ››› page 237  
Vehicle ››› page 35  
Data ››› page 34  
Air conditioning ››› page 128  
Sound  
ple, Volume (+ -).  
same time and leave them on the screen.  
●
To enlarge views, slowly separate one ꢀnger  
Open the Quick Guide  
from the other. To reduce views, slowly bring  
one ꢀnger towards the other.  
More information and operating tips can be  
found in the Infotainment Quick Guide.  
Note  
●
Press HOME >  
Help.  
If you turn on the infotainment system man-  
ually with the ignition oꢁ, it will automatically  
turn oꢁ after about 30 minutes.  
Connecting and disconnecting the infotain-  
ment system  
The infotainment system turns on when the  
ignition is switched on, unless it has been man-  
ually turned oꢁ beforehand.  
Note  
As with most state-of-the-art computer and  
electronic equipment, in certain cases the  
system may need to be rebooted to make  
sure that it operates correctly. To do this, if  
appropriate, press and hold the On/Oꢁ but-  
The infotainment system starts-up with the last  
set volume, provided that this does not exceed  
the preset maximum start-up volume.  
Users  
Store  
236  
Generalinstructionsfor use  
Settings (system and sound)  
In the sound settings there may be the follow-  
ing functions, information and setting options:  
ton of the infotainment system (››› Fig. 162)  
for approx. 15 seconds until the CUPRA logo  
appears on the display.  
The selection of possible settings varies de-  
pending on the country, the equipment in  
question and the equipment of the vehicle.  
●
●
●
Equaliser.  
Position.  
Settings.  
Customising the infotainment sys-  
tem  
Modifying settings  
System settings  
The meaning of the following symbols are valid  
for all system and sound settings.  
Customise the menus and infotainment views  
to quickly access your favourite or most fre-  
quently used functions.  
●
Access the system settings: HOME >  
.
All changes are automatically applied when the  
menus are closed.  
In the system settings there may be the follow-  
ing functions, information and setting options:  
The main menu contains function buttons for  
accessing all of the Infotainment apps.  
●
●
●
●
●
●
●
●
●
●
●
●
●
Screen.  
The setting is selected and activa-  
ted or connected.  
/
Time and date.  
Language.  
Conꢀguring customised menus  
The setting is not selected, disa-  
bled or disconnected.  
/
In all views (except Main Menu, StandBy, Park-  
ing, Speller and Full Link), you will ꢀnd short-  
cuts to customizable system functions in the  
lower part of the screen. Use the settings to  
delete or replace them, or change their order.  
Additional keypad languages.  
Units.  
To open a drop-down list.  
To increase a setting value.  
Voice control.  
Wi-Fi.  
To reduce a setting value.  
●
Press and hold one of the icons (or press on  
the icon of an empty position) to display an  
additional window.  
Car2X communication.  
Manage mobile devices.  
Reset factory settings.  
System information.  
Copyright.  
To go back step by step.  
●
●
●
Select one of the icons from the apps bar.  
Press to delete an icon.  
To go forward step by step.  
To change a setting value with  
the scrollable button without ad-  
justing.  
Click on an icon in the additional window to  
replace the value.  
Conꢀguration wizard.  
●
Hold your ꢀnger on one of the icons and drag  
Adjust the volume of external audio sources  
it to the desired position.  
Sound settings  
If you need to increase the playback volume  
for the external audio source, ꢀrst lower the  
volume on the infotainment system.  
●
To close the edit mode, press in the addi-  
●
Access the sound settings: HOME >  
.
tional window.  
237  
Infotainment system  
●
If the sound from the connected audio source  
is very low, increase the output volume on  
the external audio source. If this is not enough,  
change the input volume to medium or high.  
Windows® is a registered trademark of Mi-  
Trademarks, licenses and copy-  
rights  
crosoft Corporation, Redmond, USA.  
●
MPEG-4 HE-AAC audio coding technology  
Registered trademarks and licenses  
and patents are licensed by Fraunhofer IIS.  
If the sound from the connected external au-  
dio source is too loud or distorted, lower the  
output volume on the external audio source.  
If this is not enough, change the input volume  
to medium or low.  
●
This product is protected by certain Micro-  
Certain terms in this manual bear the symbol  
® or ™. These symbols indicate that they are  
trademarks or registered trademarks. The ab-  
sence of this symbol, however, does not nec-  
essarily mean that the term in question can be  
used freely.  
soft Corporation industrial and intellectual  
property rights. The use or commercialization  
of technology of this type outside the conꢀgu-  
ration of this product, without a licence from  
Microsoft or an authorised Microsoft branch is  
prohibited.  
Clean the screen  
Other product names are registered trade-  
marks of the respective rights holders.  
Remove persistent dirt carefully and without  
using aggressive cleaning products. To clean  
the screen we recommend that:  
Copyright  
●
Manufactured under license from Dolby Lab-  
As a general rule, audio and video ꢀles stored  
on data media and audio sources are subject  
to intellectual property protection in accord-  
ance with the national and international provi-  
sions applicable in each case. Please bear in  
mind all legal provisions!  
oratories. Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
●
●
The infotainment system is switched oꢁ.  
Use a clean, soft cloth dampened with water  
●
Manufactured under license from Dolby Lab-  
oratories. Dolby, Pro Logic and the double-D  
symbol are trademarks of Dolby Laboratories.  
››› page 313.  
●
In case of persistent dirt: soften the dirt by  
moistening with a little water. Then carefully  
remove with a clean, soft cloth.  
●
●
●
Android Auto™ is a trademark of Google Inc.  
Apple CarPlay™ is a trademark of Apple Inc.  
Bluetooth® is a registered trademark of Blue-  
Technical data  
NOTICE  
Central computer with control and display  
unit1)  
Cleaning the screen with inappropriate  
cleaning products or when dry, may damage  
it.  
tooth® SIG, Inc.  
●
The factory-mounted central computer in the  
vehicle includes country-speciꢀc components  
and software for connectivity and for the ex-  
ecution of vehicle, comfort and infotainment  
functions.  
iPod®, iPad® and iPhone® are trademarks of  
Apple Inc.  
●
●
When cleaning, only press lightly.  
●
MirrorLink® and MirrorLink® Logo are certi-  
Do not use aggressive cleaning products  
ꢀed trademarks of Car Connectivity Consor-  
tium LLC.  
or that contain solvents. Such products may  
damage the equipment and darken the  
screen.  
1)  
Equipment name: Connect System  
238  
Generalinstructionsfor use  
–
●
The corresponding indications are shown on  
the control and display unit screen and partly  
on the instrument panel.  
4 equalizer presets and 1 setting that can  
Sound optimisation by zones:  
be customised by the user.  
–
–
Manual (Driver, Front and All)  
●
●
Sound distribution (Balance) left / right  
Sound optimisation by zones:  
Automatic depending on the seats occu-  
●
●
Capacitive colour screen  
Using the equipment with:  
pied.  
–
–
●
●
Manual (Driver and All)  
Subwoofer volume.  
Surround settings.  
–
–
Touch zones Touch operation.  
Automatic depending on the seats occu-  
pied.  
Buttons on the multifunction steering  
wheel.  
Wi-Fi  
Optional sound system  
–
Proximity sensors and gesture control.  
●
●
●
Wi-Fi conforming to IEEE 802.11 b/g/n.  
Transfer in 2.4 GHz and 5 GHz.  
The infotainment system can be extended with  
an optional sound system as follows:  
HOME > Settings > Display.  
Two Wi-Fi modes at the same time:  
Vehicle and comfort functions  
●
9 speakers in diꢁerent locations and with dif-  
–
–
Tethering (2.4 GHz).  
2.4 GHz access point.  
ferent power levels (watts).  
●
●
●
●
●
Assistants system settings.  
●
External ampliꢀer (340 W Ethernet), which  
Heating and air conditioning settings.  
Lights and visibility function settings.  
Vehicle comfort settings.  
●
Simultaneous connection of up to 8 Wi-Fi  
processes the audio signals sent by the central  
computer.  
devices.  
●
Internet connection via Wi-Fi:  
●
Excitation of speaker channels through class  
Parking and manoeuvring settings.  
AB ꢀnal stages.  
–
–
Tethering through the customer's phone.  
Customer access point (clients) in the ve-  
●
Audio signal processing in digital internal sig-  
Sound system (basic equipment):  
nal processor (DSP).  
hicle.  
The infotainment system that is supplied from  
the factory is equipped as follows:  
●
Independent subwoofer in the luggage com-  
●
●
Apple CarPlay and Android Auto over Wi-Fi.  
Pairing process simpliꢀed by WPS or QR  
partment.  
●
Speakers in diꢁerent locations and with dif-  
Setting options:  
code.  
ferent power levels (watts).  
●
4 sound modes to enhance the sound expe-  
●
Internal ampliꢀer depending on the system:  
Bluetooth® proꢀles  
rience.  
–
5 speakers: 3 x 20W  
Setting options:  
●
●
There can be a maximum of two mobile devi-  
ces connected to the Bluetooth® hands-free  
and a third device connected to the Blue-  
tooth® as a music player.  
Additional equalizer: 5 bands.  
Sound distribution: Balance (left / right) +  
Fader (front / rear).  
●
Equaliser:  
239  
Infotainment system  
When a mobile phone is connected to the tel-  
ephone management system, a data exchange  
takes place via one of the Bluetooth® proꢀles.  
be colloquial. Command proposals can be  
found in the infotainment system, for example  
Requirements  
●
Online and oꢁline: voice control with the  
in the  
Help > Voice control menu.  
corresponding infotainment installed in the ve-  
hicle.  
●
Hands-free telephone proꢀle (HFP): the  
Functions are reduced in oꢁline mode.  
HFP can be used to manage calls through the  
infotainment system.  
Loud noises inside or outside the vehicle can  
cause malfunctions, as well as confusing phra-  
ses and answers.  
●
Online: current CUPRA CONNECT Plus con-  
tract active.  
●
Audio proꢀle (A2DP): This proꢀle allows au-  
Note  
dio to be transmitted with stereo quality. It may  
require connecting other proꢀles for managing  
and controlling playback.  
Seat-dependent speech recognition  
●
Voice control only recognises commands in  
the language that is set in the infotainment  
system.  
Thanks to additional microphones, voice con-  
trol can recognise whether the person speak-  
ing is the driver or the passenger. Therefore,  
in the case of languages available online, you  
can access functions for a speciꢀc seat, such  
as switching on the seat heating.  
●
Phone book access proꢀle (PBAP): Allows  
phone book contents to be downloaded from  
the mobile telephone.  
●
Test the voice control with the vehicle  
stopped before starting to move to familiar-  
ise yourself with its operation.  
●
Messaging proꢀle (MAP): It allows short  
messages (SMS) and emails to be downloaded  
●
The online voice search will be faster and  
more reliable if the privacy setting “Use loca-  
tion” is selected and you consent to the use  
of location data in the app on your mobile  
device.  
and synchronised.  
Languages available depending on the mar-  
ket  
Voice control  
●
Online and oꢁline: German, American Eng-  
●
Voice control can only control functions  
lish, British English, French, Italian, Spanish,  
Czech, Dutch, Polish, Portuguese, Swedish,  
Danish and Norwegian. These languages have  
advanced functions such as Online Com-  
mands, air conditioning control, natural inter-  
action, etc.  
that are available as part of the vehicle’s  
equipment.  
Introduction  
Voice control works both online and oꢁline1)  
taking into account the aspects indicated in  
the section “Languages available depending  
on the market”. In online mode, commands  
are recorded more accurately, as more data is  
available.  
,
Wake word and commands  
●
Oꢁline: Bulgarian, Finnish, Canadian French,  
Voice control wake words  
Greek, Brazilian Portuguese, Russian, Mexican  
Spanish and Turkish.  
Voice control starts when the infotainment  
recognises the wake word.  
Voice control understands questions and ex-  
pressions without having to learn commands.  
Commands can be formulated freely and can  
The other languages of the infotainment sys-  
tem do not oꢁer air conditioning control or  
natural interaction.  
1)  
Not available on all markets.  
240  
Voice control
●
If you have connected the voice control via the  
wake word, the connected infotainment replies  
with “What would you like to do? ”.  
Multifunction steering wheel: press the voice  
control button  
hold.  
twice in a row, or press and  
Open the command proposals  
●
Press HOME >  
>
.
●
OR: after the wake word, say the desired  
The voice control ends automatically, if you  
use infotainment functions, if the parking sys-  
tem is activated or by incoming calls.  
command, for example: “Hola Hola” and then  
“heating”.  
Note  
●
When the activation word is disconnected,  
the infotainment system cannot be activated  
by means of the activation word. Voice con-  
The system scans the words spoken in the ve-  
hicle after the wake word.  
trol is still available via the  
multifunction steering wheel.  
button on the  
Connect and disconnect the wake word  
●
Press HOME >  
Settings > Voice control >  
●
Availability depends on country and equip-  
Activate / deactivate wake word.  
ment.  
Wake word:  
Hola Hola  
Start and stop voice control  
Commands  
Depending on the equipment, you can start  
voice control in diꢁerent ways.  
To help the voice control recognise commands  
reliably:  
Start voice control  
●
Pronounce clearly. Confusing commands are  
not recognised. Speak in a normal tone of  
voice. Speak a little louder if you are driving at  
high speed.  
●
Voice control activation: say the word that  
activates voice control.  
●
Multifunction steering wheel: press the voice  
●
Avoid outside noises. Open windows and  
control button  
.
doors can interfere with voice control.  
In some cases you can also start voice con-  
trol of the connected mobile phone device, by  
pressing and holding the voice control button.  
●
Avoid other secondary noises, such as con-  
versations in the vehicle. Do not direct the air  
ꢂow from the outlets towards the microphone  
or the interior lining of the roof.  
Manually ending voice control  
●
Do not make long pauses.  
Voice control can be cancelled with the Can-  
cel command.  
Voice control is active and recogni-  
ses the words pronounced.  
241  
Infotainment system  
Radio mode  
Introduction  
Fig. 163 Schematic diagram: Radio view.  
●
In Radio mode you can tune in the available  
radio stations in diꢁerent frequency bands and  
memorise your favourites on the preset but-  
tons to access them quickly.  
You have a corresponding data plan pur-  
Access the settings  
chased from the webshop of CUPRA's oꢁicial  
data supplier, or you have a volume of data for  
your own mobile device via the Wi-Fi hotspot.  
●
Press HOME >  
>
.
Online functions in Radio mode1)  
The types of reception and frequency bands  
available depend on the equipment and the  
country. In certain countries, frequency bands  
may stop broadcasting or not be available  
again.  
Online functions in Radio mode are only availa-  
ble under the following conditions:  
Note  
●
Radio stations are responsible for the con-  
●
●
CUPRA CONNECT Plus equipment.  
tent of the information they transmit. Electri-  
cal equipment connected to the vehicle may  
also cause interference in radio signal recep-  
tion and noise in the loudspeakers.  
You have an active CUPRA CONNECT user  
account.  
Access the RADIO menu  
●
The vehicle is assigned to your user account.  
●
Press HOME >  
>
››› Fig. 163.  
1)  
Not available on all markets.  
242  
Radiomode
●
Foil or metal-coated stickers attached to  
TP Next to the name of the station, monitor-  
ing of active traꢁic information stations  
(TP).  
Show online radio stations by the desired  
language.  
the windows may aꢁect reception on vehi-  
cles with a window aerial.  
Show online radio stations whose pro-  
gramme belongs to the desired musical  
genre.  
Symbols on the FM/DAB frequency band  
Radio equipment and symbols  
To display the frequency band for manual  
selection of the FM frequency. Only pos-  
sible when the summary station list is dis-  
connected.  
The functions, as well as the types of reception  
and frequency bands available depend on the  
equipment and the country.  
Selecting, tuning and saving a sta-  
tion  
●
●
●
●
●
AM tuner.  
DAB not available.  
Select the frequency band  
Dual FM receiver (diversity antenna).  
Summarised FM station list.  
DAB stations support presentations (slide-  
show).  
Before selecting a station you have to select  
a frequency band or a type of reception. Dif-  
ferent stations are available depending on the  
frequency band selected or the type of recep-  
tion.  
Merger of DAB and FM stations into one list.  
Fusion of all stations stored in preset buttons  
into one list. Maximum 36 favourite stations.  
Symbols on the AM frequency band  
Manually updating the station list.  
To display the frequency band for manual  
selection of the AM frequency.  
●
●
Station logos.  
The types of reception and frequency bands  
available depend on the equipment and the  
country.  
DAB presentation (slideshow). Images that  
are emitted sequentially.  
Menus in Internet radio mode1)  
Show station selection.  
●
Internet Radio: over 10,000 stations and  
podcasts from around the world, included with  
CUPRA CONNECT PLUS.  
●
Select the frequency band or type of recep-  
tion: AM, FM/DAB, FM (for devices that do not  
have DAB), Internet radio.  
Open text search.  
Show the last online radio stations heard.  
Universal symbols in Radio mode  
Search and select a station  
Show the 100 most played radio stations  
and podcasts.  
AM To select the desired AM frequency band.  
You can select radio stations in diꢁerent ways.  
The options vary depending on the frequency  
band and the type of reception.  
FM/DAB To select the desired FM/DAB fre-  
Show available online radio podcasts.  
quency band.  
Show online radio stations, grouped by  
country.  
Internet radio To select the type of Internet  
radio reception.  
1)  
Not available on all markets.  
243  
Infotainment system  
OR: press  
input ꢀeld is displayed.  
to start the text search. The  
OR: press the station on the station list and  
keep it pressed. The preset buttons are dis-  
played.  
Select via the frequency band (AM and FM)  
1. Activate the frequency band.  
3. Enter the name of the station you want.  
The list of the stations found is updated  
while entering the text.  
2. Click on the cursor, scroll through the fre-  
quency band and release it when you reach  
the frequency band you want.  
4. Press the preset button.  
The station is stored in the selected preset  
button.  
4. Press the station you want.  
The selected station is tuned.  
OR: press on a point on the frequency  
band. The cursor will automatically jump to  
the corresponding frequency.  
If a station was already stored in the preset but-  
ton, it is overwritten with the new station.  
Search in SCAN mode (AM and FM/DAB)  
The station of the set frequency is tuned.  
In SCAN mode the stations are automatically  
tuned in a sequential manner and each of  
them is played for approx. 5 seconds.  
Special functions in Radio mode  
Select from the station list (AM and FM/DAB)  
Traꢁic information (TP)  
The station list shows the stations that are cur-  
rently tunable. In the AM frequency band, you  
may have to update the station list if you are no  
longer in the area where you last accessed the  
station list. In the FM/DAB frequency band, the  
station list is automatically updated.  
●
To start the SCAN mode press SCAN.  
The TP function monitors the announcements  
of a station with traꢁic information and auto-  
matically reproduces them in the Radio mode  
or in the multimedia playback that is active.  
To do this, you have to be able to tune into a  
station with traꢁic information.  
SCAN mode starts and the station currently  
tuned in is shown on the screen. Next to it is  
a SCAN function button.  
●
To select a station press SCAN.  
1. Open the station list  
SCAN mode stops and the station is tuned. The  
SCAN function button is hidden.  
Some stations without their own traꢁic in-  
formation support the TP function by broad-  
casting traꢁic information from other stations  
(EON).  
2. Press the station you want.  
The selected station is tuned. In the case of  
FM/DAB and if the station is available, the best  
quality reception is automatically selected.  
Storing the station on the preset buttons  
You can store up to 36 stations of diꢁerent fre-  
quency bands and reception types as favour-  
ites using the preset buttons.  
In the AM frequency band or in the Multimedia  
mode, a station with traꢁic information in the  
background is automatically tuned while it is  
possible to tune into a station with traꢁic infor-  
mation.  
Search and ꢀlter stations (Internet radio)  
In Online Radio mode, stations can be ꢀltered  
by categories and can be searched by text.  
1. Tune the station you want.  
2. Access the preset buttons.  
If no station with traꢁic information can be  
tuned in, the device automatically searches for  
stations with tunable traꢁic information.  
1. Open the station list.  
3. Press the preset button and keep it pressed  
until the station is stored.  
2. Select the category by which the stations  
are to be ꢀltered.  
Stations with traꢁic information are not availa-  
ble in all countries.  
244  
Radiomode
●
Activating and deactivating the TP func-  
tion  
In Online radio mode, press and set the au-  
dio quality to high or low to tune the online  
radio.  
●
In Radio mode or Multimedia mode, press  
> Traꢁic programme (TP).  
Station logos  
Presentations (SlideShow) in DAB  
In the case of some frequency bands, station  
logos may already be pre-installed in the info-  
tainment system.  
The slideshow function (SLS) is a feature of  
digital radio (DAB) stations, allowing a slide-  
show of images, e.g. the station’s logo, to the  
user.  
If in the FM/DAB frequency band settings the  
automatic selection of station logos is activa-  
ted, station logos are automatically assigned to  
the stations.  
Activating and deactivating the SLS func-  
tion  
In the Online radio mode, the infotainment  
system accesses the station logos of the on-  
line database and automatically assigns them  
to the stations.  
It is possible to deactivate the slideshow func-  
tion on DAB radio stations:  
●
Menu  
> Slide Show (switch on/oꢁ).  
Assign station logos manually  
Online radio1)  
1. In FM/DAB mode, press Station logos.  
Online radio is a type of reception for Internet  
radio stations and podcasts that are independ-  
ent of AM, FM and DAB. Thanks to Internet  
transmission, reception is not limited to the re-  
gion.  
2. Press on the  
icon and then select the  
station to which a station logo is to be as-  
signed.  
3. Select the station logo. If desired, repeat  
the same process with other stations.  
Internet radio is only available with CUPRA  
CONNECT PLUS online services activated and  
online mode active. The use of online radio  
can generate expenses due to the transmission  
of data from the Internet.  
4. OR: via the menu  
> Station logos.  
1)  
Not available on all markets.  
245  
Infotainment system  
Media Mode  
Introduction  
Fig. 164 Schematic diagram: Media view  
In Media mode you can play multimedia ꢀles  
from data media and through the infotainment  
system.  
Incorrect conꢀguration on a data media may  
cause the data media to be unreadable.  
Access the MEDIA menu  
●
Press HOME >  
>
››› Fig. 164.  
Playlists only specify a playback order and refer  
to the storage location of the multimedia ꢀles  
within the folder structure. In a playlist there  
are no multimedia ꢀles saved. To play a play-  
list, multimedia ꢀles have to be found in the  
storage places of the data media to which the  
playlist refers.  
Access the settings  
Depending on the equipment, the following  
data media can be used:  
●
Press HOME >  
>
.
●
USB storage support (for example, a USB  
Limitations and indications of data media  
stick, a mobile phone connected via USB).  
●
Bluetooth® device (for example, a mobile  
Data media may not work if they have been  
exposed to high temperatures or have been  
damaged. Please bear in mind the manufac-  
turer’s indications.  
phone or a tablet).  
Note  
Depending on the equipment, the following  
types of multimedia ꢀles can be played:  
CUPRA assumes no liability for any deteriora-  
tion or loss of ꢀles on data storage devices.  
Quality diꢁerences between data media pro-  
duced by diꢁerent manufacturers can cause  
multimedia playback malfunctions.  
●
●
Audio ꢀles.  
Video ꢀles (depends on the system).  
246  
MediaMode
Return to the top folder of the media  
source.  
2. Search for the title you want in the folder  
structure.  
Equipment features and media  
symbols  
OR: press  
to start a text search The in-  
Audio, multimedia and connectivity:  
put ꢀeld is displayed.  
Select and play a multimedia  
source  
3. Enter the name of the desired title. The list  
of the titles found is updated while entering  
the text.  
●
●
Media playback and control via Bluetooth®.  
Audio playback in these formats: AAC, ALAC,  
AVI, FLAC, MP3, MP4, WMA.  
Select multimedia source  
4. Press the desired title.  
Before playing multimedia ꢀles you must ꢀrst  
connect a multimedia source.  
●
Video playback in these formats: MPEG-1  
and MPEG-2 (.mpg, .mpeg), ISO MPEG4, DivX  
3, 4 and 5 Xvid (.avi), ISO MPEG4 H.264  
(.mp4, .m4v, .mov), Windows Media Video 10  
(.wmv, .asf).  
If at the beginning of the playback your se-  
lection is in a folder of a multimedia source,  
the multimedia ꢀles that are in it are also  
added to the playback.  
●
●
Connect an external multimedia source.  
Select the connected media source to be  
used for playback.  
●
●
Playlists on any type of device.  
Multimedia search.  
If a playlist is played, all available titles in the  
playlist are added to the playback.  
Playing audio and video ꢀles  
5. Close your selection with  
.
You can search and play multimedia ꢀles from  
an available multimedia source in diꢁerent  
ways.  
Universal symbols in Media mode  
Start playback.  
Select favourites  
In favourites you can save titles, music genres,  
artists and albums individually for playback.  
Pause playback.  
Search in the folder structure  
Change to the previous track.  
Change to the next track.  
Repeat the track that is playing.  
Repeat all titles.  
●
●
Access favourites  
.
Multimedia ꢀles can be catalogued by catego-  
ries (for example, album, artist, title). In My  
media this category view is always displayed.  
The classic folder structure of individual USB  
data media is also found in My media.  
Press the favourite you want.  
Depending on your selection, all the titles be-  
longing to the favourite are added to the play-  
back.  
Activate the shuꢁle playback order.  
Display a list of favourites.  
Add a media ꢀle as favourite.  
Top right: select media source.  
Access the settings.  
1. Activate the folder structure.  
The folder structure of the selected multi-  
media source is displayed. When My media  
is selected, the categories (music, videos,  
playlists) and connected multimedia sour-  
ces are displayed ꢀrst.  
Save favourites  
Only multimedia ꢀles in My media of the info-  
tainment system can be saved as favourites.  
You can save up to a maximum of 36 titles,  
albums, artists and music genres individually as  
favourites.  
Open the search.  
247  
Infotainment system  
1. Start playback.  
The image is only displayed if the vehicle is  
stopped. When the vehicle is in motion, the in-  
fotainment screen turns oꢁ. The sound of the  
video can still be heard.  
2. Access favourites.  
3. Tap a favourite that is not assigned.  
OR: press and hold on an existing favourite  
for approx. 3 seconds.  
4. Select from the selection list: Title, Album,  
Artist, Genres, Playlist.  
The selection is saved instead of the previ-  
ously selected favourite. If the favourite was al-  
ready assigned, the previously saved favourite  
is overwritten.  
The selectable options in the selection list de-  
pend on the data attached to the multimedia  
ꢀle. If the music genre is not indicated in the  
music ꢀles, for example, you cannot save the  
music genre as favourite.  
If a video ꢀle is playing, only that video can be  
saved as favourite.  
Playing entertainment content in  
the infotainment system  
Depending on the infotainment system, videos  
can be played.  
Video mode  
When in Video mode, a video stored on data  
media, in My multimedia can be played on  
the infotainment display. In this case, the video  
sound is played through the vehicle's speakers.  
248  
Navigation
Navigation  
Introduction  
Fig. 165 Schematic diagram: Navigation view.  
A global satellite system determines the cur-  
rent position of the vehicle and the sensors  
mounted on the vehicle analyse the routes  
taken. All measured values and possible traꢁic  
events are compared with the available maps  
to allow optimal navigation to the destination.  
During dynamic route guidance, you will re-  
ceive information about reported traꢁic con-  
gestion on the route. An additional navigation  
announcement is given if the route is recalcu-  
lated due to traꢁic congestion.  
Navigation announcements  
Navigation announcements are acoustic indi-  
cations for driving referred to the current  
route.  
The type and frequency of navigation an-  
nouncements depend on the driving situation,  
for example, starting the guide to the destina-  
tion, driving on the motorway or on a round-  
about and the settings.  
While a navigation announcement is playing,  
its volume can be adjusted. The following navi-  
gation announcements provided will be played  
with the newly adjusted volume.  
Navigation announcements and graphic repre-  
sentations will guide you to your destination.  
Navigation management is carried out on the  
screen.  
If the exact destination cannot be reached be-  
cause, for example, it is in a non-digitised area,  
indications relating to the address and the dis-  
tance to the destination are displayed on the  
screen.  
Limitations during navigation  
Depending on the country, some functions of  
the infotainment system will not be available  
on the screen when travelling above a certain  
speed. It is not a malfunction, but is due to  
compliance with legislation.  
If the infotainment system cannot receive data  
from GPS satellites, for example, in a tunnel or  
in an underground garage, navigation contin-  
ues using the vehicle's sensors.  
249  
Infotainment system  
●
●
In areas that are not digitised or are only parti-  
ally digitised on the infotainment memory, the  
infotainment system will still attempt to provide  
route guidance.  
Press on the map with both ꢀngers at the  
Press on the map with both ꢀngers at the  
same time.  
same time and keep them pressed.  
●
To rotate the map view, turn your ꢀngers  
Change view  
clockwise anticlockwise.  
In the case of missing or incomplete navigation  
data, it may not be possible to determine the  
exact position of the vehicle. This may mean  
that navigation is not as precise as usual.  
Tip: use your index ꢀnger  
Saved data  
●
Press twice on the map and keep your ꢀnger  
The infotainment system saves certain data, for  
example, frequent routes and position data, to  
make the entry of the destination more agile  
and optimise the route guidance.  
pressed on the screen.  
●
To zoom out the view of the map, move your  
Roads and streets are subject to constant  
change (e.g. new roads, road works, roads  
closed to traꢁic, changes to street names and  
building numbers). If the navigation data is ob-  
solete, this may lead to errors or inaccuracies  
during the route guidance.  
ꢀnger upwards. To zoom in the view of the  
map, move your ꢀnger downwards.  
Delete saved data  
Change view  
●
Press Settings > Basic function settings >  
Tip: use your thumb and index ꢀnger  
Delete and then Accept.  
●
Press on the map with both ꢀngers at the  
Managing the navigation map  
same time and keep them pressed.  
WARNING  
To allow an optimal view, you can also man-  
age the navigation map with additional ꢀnger  
movements.  
●
To zoom out the view of the map, move one  
Select the settings, enter the destination and  
the modiꢀcations for navigation only with  
the vehicle at a standstill.  
ꢀnger towards the other. To zoom in the view  
of the map, move one ꢀnger away from the  
other.  
Moving the map  
Tilt the view  
Note  
Tip: use your index ꢀnger  
Tip: use your index and middle ꢀngers  
●
●
If a detour is passed during route guidance,  
Move the map with your ꢀnger.  
navigation may recalculate the route.  
●
Press on the map with both ꢀngers at the  
Zoom in  
same time and horizontal to each other, keep  
them pressed.  
●
The quality of the navigation recommen-  
dations given by the Infotainment system de-  
pends on the navigation data available and  
any reported traꢁic congestions.  
Tip: use your index ꢀnger  
●
To tilt the view of the map forward, move  
your ꢀngers upwards. To tilt the view of the  
map backward, move your ꢀngers downwards.  
●
To increase the view in a certain position,  
double-click on the map.  
●
Navigation announcements are not emit-  
ted if the sound is muted in the infotainment  
Zoom out  
system.  
Rotate the map  
Tip: use your index and middle ꢀngers  
Tip: use your thumb and index ꢀnger  
250  
Navigation
Search for destinations.  
Other symbols  
Entering the detailed destination for an  
Navigation functions and symbols  
Destinations along the route.  
Final destination.  
Navigation  
address.  
Navigation functions depend on the equip-  
ment and country.  
Search for destinations.  
Frequent destinations.  
Last destinations.  
Favourite destinations.  
Back  
Home address.  
Work address.  
All navigation functions require the activation  
of CUPRA CONNECT PLUS online services.  
Favourite destinations.  
Additional window with more options.  
Additional window with route options.  
Centre the map on the current position.  
Functions  
●
Entering the destination and route calcula-  
tion (oꢁline and online1)).  
Symbols in the route details  
Current position.  
Change view: 2D oriented to the north,  
or 2D oriented to the direction of travel,  
or 3D to the direction of travel.  
●
Display of two navigation maps at the same  
Destination of the current guidance.  
time (screen and instrument cluster).  
1)  
●
●
●
Update of online maps  
Predictive navigation.  
3D urban maps.  
.
POI symbols (points of interest)  
Information about the current route guid-  
ance.  
POIs (points of interest) are shown on the map,  
provided the navigation has said data.  
Map scale.  
1)  
●
●
Online traꢁic information  
.
Click on the desired POI (point of interest) to  
Symbols in the additional window  
start a route guidance ››› page 252.  
Dynamic POIs (points of interest).  
●
To open the additional window, press  
.
Electric charging station.  
Symbols on the map  
Repeat the last navigation announcement.  
Volume of navigation announcements.  
Petrol station.  
The buttons and indications depend on the  
settings and the current driving situation.  
Parking lot.  
Map lighting in Automatic, Day or Night  
mode.  
Tourist information oꢁices.  
Train station.  
Symbols for traꢁic events and points of inter-  
est (POIs) are displayed on the map, for exam-  
ple, petrol stations, train stations or interesting  
stopovers, provided navigation has such data  
Oꢁer new guidance routes.  
360° range indicator.  
Restaurant.  
››› page 254.  
Current position.  
1)  
Not available on all markets.  
251  
Infotainment system  
Traꢁic information.  
Manual update of navigation data  
POIs (points of interest) are shown on the  
map, provided the navigation has said data  
››› page 254.  
Current navigation data for large regions, for  
example Western Europe, can be downloaded  
devices.  
Navigation data  
The Infotainment system is equipped with a  
built-in navigation data memory. Depending  
on the country, the necessary navigation data  
may already be pre-installed.  
Click on a traꢁic event to open an additional  
●
Download the navigation data to a USB data  
window with further details ››› page 255.  
device.  
Slow traꢁic.  
To provide correct route guidance and make  
the most of the functions oꢁered, the infotain-  
ment system should be updated on a regular  
basis.  
●
●
Turn on the ignition of the vehicle.  
Connect the USB data device to the infotain-  
Traꢁic jam.  
ment system. Navigation data is automatically  
updated in the background.  
Accident.  
Using obsolete data may lead to errors during  
navigation. Current routes cannot be traced or  
the route guidances will lead to mistaken desti-  
nations.  
The map version is displayed in HOME >  
System information.  
>
Broken down vehicle.  
Slippery surface (ice or snow).  
Road closed to traꢁic.  
Slippery road hazard.  
Danger.  
Note  
Ensure navigation data is updated at all times.  
Automatic update of the navigation data is  
subject to the privacy settings. No update is  
made in incognito mode.  
Online updating of navigation data1)  
The navigation data of the regions through  
which you travel frequently is automatically up-  
dated in the background if the Internet con-  
nection is established and the privacy settings  
are valid.  
Start route guidance  
Depending on the country and equipment, dif-  
ferent functions are available to enter destina-  
tions.  
●
With the ignition switched on, the navigation  
Road works.  
data is updated automatically.  
Strong wind.  
The diꢁerent functions for entering destina-  
tions are found in the navigation main menu.  
Reduced visibility.  
1)  
Not available on all markets.  
252  
Navigation
Select the destination and start navigation:  
Whether it is possible to enter the destination  
through the navigation map depends on the  
state of the data and it is not possible for all  
positions.  
Opening the Navigation main menu  
1. Press  
and then  
.
●
Press HOME >  
.
2. Press the desired destination.  
Select the destination and start navigation  
1. Press  
2. Select the desired destination. You can  
chose from Frequent destinations,  
3. Press Start.  
To start “oꢁroad navigation”, press an empty  
area without position data.  
.
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
Start navigation:  
1. Press  
.
Last destinations or  
nations.  
Favourite desti-  
Favourite destinations  
2. Move the view on the map until the desired  
position can be selected. The navigation  
map can be used by means of additional  
Save up to 20 destinations as favourites.  
OR: press  
and enter the address in the  
To save a destination as a favourite press  
the split screen when entering the destination.  
in  
input screen.  
ꢀnger movements ››› page 249.  
3. Press the desired destination on the map.  
4. Press Route.  
OR: detailed address.  
3. Press Start.  
Select the destination and start navigation:  
1. Press  
and then  
.
2. Press the desired destination.  
Frequent destinations  
Oꢁroad navigation  
3. Press Start.  
The destination synopsis uses recorded data to  
propose possible destinations.  
“Oꢁroad navigation” calculates routes to se-  
lected destination points using unknown data.  
When a destination point is outside the known  
roads or position data, navigation ꢀnds the  
route to the next point of the known road and  
completes the path to the next destination  
point with a direct connection.  
Note  
Select the destination and start navigation:  
Enter the destination as accurately as possi-  
ble. If you enter a destination incorrectly, the  
route guidance will not be able to start or it  
will guide you to an incorrect destination.  
1. Press  
and then  
.
2. Select the desired destination. The route  
guidance starts automatically.  
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
Start navigation:  
Start route guidance by selecting from the  
map  
1. Move the view on the map until the desired  
position can be selected. The navigation  
map can be used by means of additional  
ꢀnger movements ››› page 249.  
2. Press on any point on the map without po-  
sition data.  
Recent destinations  
The navigation map includes active areas at  
many points that are suitable for entering the  
destination. To do this, press the desired posi-  
tion or place on the map. If there is map data at  
this point, you can start a route guidance.  
Navigation saves the last destinations to make  
them available for a route guidance.  
3. Press Route.  
253  
Infotainment system  
If the route requires the calculation of more  
stops than are permitted, this calculation  
would be cancelled.  
The locations of other charging stations in  
the vicinity are shown on the map.  
Start route guidance using contact details  
Start route guidance with the saved address  
data of a contact. Contacts saved without ad-  
dress data cannot be used for route guidance.  
6. On the map or list, press an alternative  
charging station in the vicinity. Details are  
displayed of the alternative charging sta-  
tion.  
Note  
Start navigation:  
Getting optimal results when calculating  
routes with automatic charging points de-  
pends on the availability of charging points  
stored in the navigation data.  
1. Press  
.
7. Press Charge here.  
2. Press on the contact you want.  
OR: press Add as stopover. The previously  
programmed charging station is replaced  
by the newly selected charging station and  
the route is adapted.  
3. Press Route.  
In settings you can specify the desired pay-  
ment mode for the charging stations. Depend-  
ing on your selection and the available data,  
suitable charging stations are displayed on the  
map and programmed into the route.  
Note  
If the address details of a contact are ob-  
solete, the route guidance will nevertheless  
take you to the registered address. Check  
that the contact address is updated.  
Note  
If you select Add as stopover, the selec-  
ted charging station is kept if the route is  
changed.  
The adjustable maximum charging limit for the  
vehicle can be adjusted in the  
menu.  
Vehicle main  
Add stops for automatic charging  
Traꢁic information  
To add stops for automatic charging, under  
route options activate the automatic charging  
station planning as required along the route.  
Select alternative charging stations  
The infotainment system receives detailed  
For planned routes, instead of automatically  
planned charging stations, you can select al-  
ternative charging stations along the route.  
traꢁic information automatically1) if the Inter-  
net connection is established. This information  
is shown with symbols and highlighting the  
road network in colour on the map.  
There is a limited number of waypoints in the  
route calculation planning:  
1. Enter or select the desired destination.  
2. Press Start.  
●
Maximum of 5 charging stops calculated au-  
tomatically by the system.  
Traꢁic incidents  
3. Open the route details.  
●
Maximum of 3 waypoints determined and set  
4. In the route details, press on a planned  
charging station. Details of the planned  
charging station are displayed.  
Traꢁic incidents, for example, traꢁic jams or  
congested traꢁic, are shown on the navigation  
map using symbols.  
by the user.  
●
Any combination of the two that respects  
the aforementioned maximums.  
5. Press Show more charging stations.  
1)  
Not available on all markets.  
254  
Navigation
Function descriptions  
●
●
With an active route guidance, traꢁic incidents  
that are on the current route are shown in  
the route details. Such traꢁic incidents can be  
Press on a traꢁic event.  
Press on Avoid. The route will recalculate.  
Route details  
avoided ››› page 255, Function descriptions.  
Split screen  
The route details contain information on all in-  
cidents, for example, the starting point, stop-  
overs, traꢁic events, POIs and destination, pro-  
vided the navigation has such data.  
When handling navigation functions, an addi-  
tional window with other options may open.  
Possible options depend on the function being  
used.  
Hazard information  
Hazard information is shown on the navigation  
map with symbols in the same way as traꢁic  
incidents. In this case, the source of this infor-  
mation is another vehicle that has detected  
the hazard and has uploaded the information  
to the service provider.  
If you press on an incident, an additional win-  
dow opens providing more options. The avail-  
able options depend on the incident and the  
current settings.  
Close the additional screen  
●
Press on an empty area outside the addi-  
Open and close the route details  
tional window.  
The hazards shown are: accident, broken down  
vehicle and slippery road surface.  
●
●
To open them, press or swipe it.  
To close them, press or swipe it.  
●
●
OR: press  
.
OR: press Accept.  
Traꢁic ꢂow indication  
Functions in the additional window:  
Edit route guidance  
The navigation map shows traꢁic ꢂow accord-  
ing to current traꢁic events, highlighting the  
road network in colour.  
Show on  
map  
Show what is selected on the  
map.  
To edit the route guidance, move the stop-  
overs to the destination in the TripView view.  
Add stop-  
over desti- guidance.  
nation  
Add a stopover to the route  
●
Hold the desired destination pressed until it  
●
●
Yellow: Slow traꢁic.  
Red: Traꢁic jam.  
is visibly highlighted.  
●
●
Move the destination to the desired position.  
Remove your ꢀnger from the screen. The  
Note  
Direct  
route  
Starts direct route guidance.  
route will recalculate.  
Traꢁic information receipt is subject to the  
privacy settings. In maximum Privacy mode,  
no traꢁic information is received. Tracking or  
Location level setting is necessary.  
Delete  
Delete a stopover from the  
route guidance.  
Avoid traꢁic incidents  
The details of the route show the current traf-  
ꢀc incidents if the navigation has such data.  
Avoid traꢁic incidents by editing route details  
››› page 255.  
Avoid  
Avoid traꢀic jam. The route will  
recalculate.  
Stop route Ends the current route guid-  
guidance  
ance.  
Close the additional window.  
255  
Infotainment system  
Enable and disable learning usage pattern  
Functions in the additional window:  
The setting is in the corresponding navigation  
Add a destination to favourites.  
menu  
> Basic function settings.  
●
To activate the function, activate Learn us-  
Learn usage pattern  
age pattern.  
When the vehicle is in motion, navigation saves  
routes and destinations used to automatically  
generate destination proposals. Destinations  
are learned based on the time of day and the  
day of the week.  
●
To disable the function, disable Learn usage  
pattern.  
●
To delete saved data, press Delete usage  
pattern.  
Navigation can propose up to 5 routes at the  
same time. The proposed routes may be diꢁer-  
ent from the routes of the normal route guid-  
ance.  
360° operating range display  
The 360° operating range display shows the  
possible range with the current charge level of  
the high voltage battery.  
If one of the proposed destinations is selected,  
the guide to that destination is started.  
Switch on the 360° operating range display  
●
Open the additional map window and press  
The route guidance follows the selected route  
until the vehicle deviates from it. In that case,  
the route is recalculated and takes you back  
along the most direct path to the initially selec-  
ted destination.  
the symbol  
.
To deactivate the 360° range display, select:  
Navigation menu > Range > Deactivate.  
Note  
Important traꢁic jams are taken into account  
in the route guidance, and are avoided if alter-  
native routes are available, provided navigation  
has such data.  
●
If the battery charge level is very low,  
the range indicator is automatically hidden.  
When the battery is recharged, the range in-  
dicator is displayed again.  
You can activate and deactivate the function  
whenever you want.  
●
If necessary, adapt the map view to display  
the full range on the map.  
256  
Telephoneinterface  
Telephone interface  
Introduction  
Fig. 166 Schematic diagram: Phone view.  
You can use the telephone interface to con-  
nect your mobile to the infotainment system  
and operate phone functions through it. The  
sound is played through the vehicle's speakers.  
Telephone interface equipment  
and symbols  
Note  
●
As a general rule, pairing a device (for ex-  
ample, a mobile phone device) is only nec-  
essary once. You can restore the device con-  
nection via Bluetooth® or Wi-Fi with the in-  
fotainment system whenever you want with-  
out having to pair the device again.  
Equipment features  
You can connect up to two mobile phone devi-  
ces simultaneously to the infotainment system.  
●
●
●
Hands-free function.  
Use up to two phones at the same time.  
Phone book with a maximum of 5,000 con-  
High speeds, poor weather or road conditions  
and a noisy ambience (even outside of the ve-  
hicle), as well as the quality of reception can all  
aꢁect the quality of a telephone conversation  
in the vehicle.  
●
The availability of some telephone func-  
tions will depend on the mobile phone con-  
nected to the infotainment system.  
tacts.  
●
SMS functions via Bluetooth®: SMS reading,  
SMS writing (templates included), SMS play-  
back, message history.  
●
Email functions via Bluetooth®: reading  
email, writing email.  
257  
Infotainment system  
●
●
●
Connection to wireless charging option.  
Outgoing call.  
Places where the air is laden with chemicals  
or particles such as ꢂour, dust or metal pow-  
der.  
Connection to the microphone mounted on  
Missed call.  
the vehicle.  
Telephone number (company).  
Telephone number (private).  
Mobile telephone number (company).  
Mobile telephone number (private).  
Fax (private).  
●
All other places where the drive system or  
telephone must be switched oꢁ.  
Symbols in the main menu  
Contacts.  
WARNING  
List of incoming and outgoing calls.  
Enter telephone number.  
Text messages (SMS and emails).  
Telephone interface settings.  
Switch oꢁ the mobile phone in areas with a  
risk of explosion!  
Fax.  
Note  
Symbols for text messages  
In areas where special regulations apply or  
the use of mobile phones is forbidden, it  
must be switched oꢁ at all times. The radi-  
ation produced by the mobile phone when  
switched on may interfere with sensitive  
technical and medical equipment, possibly  
resulting in malfunction or damage to the  
equipment.  
The symbols may be diꢁerent depending on  
the infotainment system.  
Symbols for calls  
The symbols may be diꢁerent depending on  
the infotainment system.  
●
To open the text messages, press  
.
Activate voice control input ››› page 240.  
Templates for text messages.  
Start a call or bringing it to the foreground.  
End or reject a call.  
Open contact list or Start conference call.  
Enter telephone number.  
Mute the sound of the hands-free  
Hold call.  
Places with special regulations  
Pair, connect and manage  
Switch oꢁ the mobile telephone and the tel-  
ephone interface in places with a risk of ex-  
plosion. These places are not always clearly  
marked. They include, for example:  
Requirement for pairing:  
●
Bluetooth® is activated on the mobile phone  
Continue call.  
device.  
Pass call to private mode.  
Make an emergency call.  
Voice mail.  
●
●
●
The vicinity of chemical pipelines and tanks.  
The lower decks of boats and ferries.  
●
Bluetooth® is activated on the infotainment  
system.  
In the proximity of vehicles that run on lique-  
●
Depending on the mobile device, it will be  
ꢀed gas (such as propane or butane).  
necessary to have the Bluetooth® menu open  
or activate the Visibility option so that the de-  
vice is visible from the infotainment system.  
Call list symbols  
●
To open the call lists, press  
Incoming call.  
.
258  
Telephoneinterface  
●
The vehicle must be stopped or someone  
tions. To use the telephone interface with the  
desired mobile phone device, establish the ac-  
tive connection with the infotainment system.  
User proꢀles  
must be detected in the front passenger seat  
to perform the pairing.  
For each of the paired mobile phone devices  
an individual user proꢀle is automatically cre-  
ated. In the user proꢀle, data from the mobile  
phone device is stored, for example, contact  
details or settings. A maximum of four user  
proꢀles can be saved in the infotainment sys-  
tem at the same time.  
Pair a mobile phone device suitable for tel-  
ephony with the infotainment system to use  
the telephone interface functions. On the ꢀrst  
connection, the mobile phone device is paired  
with the infotainment system. Doing so saves a  
Diꢁerence between connection types  
Active The mobile phone device is paired  
and connected. The functions of the tel-  
ephone interface are performed with the  
data of said mobile phone device.  
user proꢀle ››› page 259, User proꢀles.  
The pairing can take a few minutes. The func-  
tions available depend on the mobile phone  
device used and its operating system.  
Passive The mobile phone device is paired  
and connected. Calls can be managed but  
the phone book, messages or other func-  
tions will not be active.  
WARNING  
If you perform the pairing while driving, it  
could cause an accident or injury.  
●
Perform pairing only with the vehicle at a  
Paired mobile phone devices are stored in the  
infotainment system, even if they are not cur-  
rently connected.  
standstill.  
Pair a mobile phone device  
1. Open the list of available Bluetooth® devi-  
ces on the mobile phone device and select  
the name of the infotainment system.  
Note  
Connect a mobile phone device  
●
While the infotainment system is in the  
2. Please note and, if necessary, conꢀrm  
the messages that appear on the mobile  
phone device and on the infotainment  
system. If the pairing was successful, the  
phone data is saved in the user proꢀle.  
Known mobile phones menu, the wireless  
charging function is disabled. When you exit  
this menu, the wireless charging function is  
activated again.  
Requirement: the mobile phone device is  
paired with the infotainment system.  
●
Bluetooth® is activated on the mobile phone  
device.  
●
In the pairing of some mobile phone devi-  
ces, a PIN number is shown on the screen of  
the mobile phone device. Enter that number  
in the infotainment system to complete the  
pairing.  
3. Optional: conꢀrm the data transfer mes-  
Establish an active connection  
sage on the mobile phone device.  
Requirement: several mobile phone devices  
are connected to the infotainment system at  
the same time.  
Active and passive connection  
To use the functions of the telephone inter-  
face, there must be at least one mobile phone  
device connected to the infotainment system.  
If there are several mobile phone devices con-  
nected to the infotainment system, you can  
switch between active and passive connec-  
●
Select the desired mobile phone device from  
Basic and Comfort Telephony  
the drop-down menu. All other mobile phone  
devices are automatically in the passive con-  
nection.  
Depending on the equipment, two types of tel-  
ephone interface can be used:  
259  
Infotainment system  
●
●
Basic telephone interface.  
Make a call  
Dial number  
Comfort telephone interface.  
Select a phone number to start a call. Diꢁerent  
functions are available for selecting a phone  
number:  
Manually enter a phone number to start a call.  
While entering the phone number, contacts  
that match that number are shown on the info-  
tainment screen.  
Basic telephone interface  
The Basic telephone interface uses the Blue-  
tooth® HFP proꢀle for transmission. This in-  
terface allows the use of telephone functions  
through the infotainment system and playback  
through the vehicle's speakers.  
Contacts  
●
Press  
and enter the telephone number.  
to start the call.  
If a contact has several registered phone num-  
bers you have to select one.  
Press  
The last call is dialled by pressing and holding  
●
Press  
and press a number on the list to  
the  
button on the multifunction steering  
start the call.  
wheel.  
Comfort telephone interface  
OR: press  
and enter the contact name in  
Like the Basic telephone interface, the Com-  
fort telephone interface also uses the Blue-  
tooth® HFP proꢀle.  
Send messages  
the input ꢀeld to search for it. Press on the  
contact to start the call.  
Depending on the mobile phone device and  
the infotainment system used, you can send  
and receive SMS and e-mails through the tele-  
phone interface.  
OR: press a favourite in the telephone interface  
main menu to start the call.  
The Comfort phone interface can be equip-  
ped with the wireless charging function  
››› page 261.  
Calls  
In order to use the functions of the wireless  
charging function, you have to place a suitable  
mobile phone device correctly in the storage  
compartment. The mobile phone device will  
then connect to the vehicle antenna. This im-  
proves the reception and sound quality of calls.  
Send an SMS:  
The telephone interface shows the call list of  
the mobile telephone device. Start a call from  
the call list.  
1. Press  
> Text message > Enter new mes-  
sage and enter the message on the screen.  
2. Enter the contact you want in the search  
bar.  
●
Press  
to start the call.  
> All and press a number on the list  
3. To send the message press OK.  
OR: press  
and ꢀlter the call list entries (for  
example, missed calls or dialled numbers). In  
ꢀltered list, press a number to start the call.  
Calling and sending messages  
Send an email:  
Open the telephone interface  
●
Press  
> E-mail > Enter new message and  
enter the message on the screen.  
●
Press HOME >  
.
●
●
Enter the contact you want in the search bar.  
To send the message press OK.  
260  
Telephoneinterface  
The Connectivity Box includes diꢁerent func-  
tions that will help to use your mobile device.  
These are:  
Edit the speed dial button  
Phone book, favourites and speed  
dial buttons  
●
To edit or delete a favourite contact press  
on the icon in the Favourites menu screen.  
In the ꢀrst connection of a telephone with the  
infotainment system, the phone book is saved  
in the infotainment system. It may be neces-  
sary to conꢀrm the data transmission on the  
mobile phone.  
You can delete one or more favourites.  
● Wireless Charger1)  
.
●
Signal ampliꢀer / (Mobile Signal Ampliꢀer)  
Call a favourite  
Wireless charger  
●
Press the assigned speed dial button.  
The Wireless Charger allows mobile devices  
with Qi2) technology to be charged without a  
cable.  
Each time the phone is reconnected, the  
phone book is updated.  
Note  
Favourites are not updated automatically. If  
you change a contact's phone number, you  
have to reassign the speed dial button.  
If conference calls are supported, the phone  
book can be accessed during a call. If there is  
a saved image for a contact, it can be displayed  
in the list next to the entry.  
To charge your mobile phone wirelessly:  
●
Place your mobile device in the middle of  
the pad with the screen facing up ››› Fig. 167 ,  
Connectivity Box  
›››  
.
Favourites  
Make sure there are no objects between the  
pad and the mobile phone.  
A speed dial button can be assigned to a  
phone book favourite up to a maximum of six.  
If there is a registered photo saved to the con-  
tact, it is shown on the speed dial button.  
The mobile phone will start charging automat-  
ically. For further information about whether  
your mobile device supports Qi technology,  
check your phone's user manual or visit the  
CUPRA website.  
All speed dial buttons have to be manually  
edited and will be assigned to a user proꢀle  
››› page 258.  
Mobile Signal Ampliꢀer  
Assign the speed dial button  
It allows you to reduce radiation in the vehicle  
and have better reception.  
Fig. 167 Centre console: slot for mobile  
phone connection.  
●
In the Favourites menu, press the button,  
then open the phone book to select a contact  
as a favourite. If the contact has several phone  
numbers, press on the number in the list.  
1)  
It only includes the wireless charge functionality.  
2)  
Qi technology allows you to charge your mobile phone wirelessly.  
261  
Infotainment system  
●
For safety reasons, it is recommended that  
you pair the system and the mobile using Blue-  
tooth® and place it on the Connectivity Box  
pad, for the best reception without having to  
handle the mobile phone.  
No improvement in reception can be guar-  
that there is a foreign object in the storage  
compartment. Using a suitable mobile phone  
device and correcting its position can elimi-  
nate the fault.  
anteed if there is more than one mobile  
phone on the pad.  
●
You are advised to keep the drive system on  
to guarantee proper wireless charging.  
●
If necessary, remove any objects that may  
obstruct the cover’s closing function.  
●
When a telephone with Qi technology is  
To establish a connection with the vehicle's ex-  
ternal aerial:  
connected by USB, it will be charged by the  
means speciꢀed by the manufacturer.  
●
While driving, always keep the armrest  
cover closed and the screen of the device  
completely covered.  
●
Place your mobile device in the middle of  
the pad with the screen facing up ››› Fig. 167 ,  
›››  
.
WARNING  
Make sure there are no objects between the  
●
pad and the mobile phone.  
The mobile phone may heat up due to the  
wireless charging. Think about this before  
you pick it up, and take care when removing  
it.  
Your mobile phone will automatically be ready  
to make use of the external aerial.  
●
There must be no metallic or other objects  
WARNING  
between the mobile phone and the housing,  
to prevent the functionality of the Connec-  
tivity Box from being aꢁected.  
Notiꢀcations on the screen of the mobile de-  
vice can distract the driver’s attention and  
increase the risk of a serious accident.  
●
Only place one suitable mobile device,  
Note  
with Qi compatibility if applicable. To ensure  
that it operates properly, place it without the  
protective case and ensure that it has max-  
imum dimensions (width x length) of 80 x  
140 mm (3.15 x 5.512 inches) on the base of  
the Connectivity Box as indicated.  
●
Your mobile device must support the Qi  
inductive charging interface standard for  
proper operation.  
●
The charging time and the temperature  
vary in accordance with the device used.  
●
If the mobile device is not placed on the  
●
●
The maximum charging capacity is 5 W.  
base of the Connectivity Box, in the correct  
position, or if its dimensions exceed those  
speciꢀed, it may not be recognised or may  
not charge correctly. Under certain circum-  
stances, the infotainment system indicates  
Qi technology does not allow you to charge  
more than one mobile device simultane-  
ously.  
262  

Related Topics

Popular Owner Manuals