2002-2008 Cupra Born SUV Quick start guide User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Quick start guide for Your Cupra Born SUV First Generation (2002-2008)

Quick start guide  
Automatic disconnection  
Quick start guide  
Ignition  
Automatic connection of the drive  
system  
Fig. 3 Digital Cockpit Display  
Automatic driver detection  
Fig. 5 Digital Cockpit Display  
2. Press the brake pedal.  
The Digital Cockpit displays ››› Fig. 3.  
Park: Vehicle on and stopped in a parked  
status.  
1. Brake to step (if Autohold is inactive, press  
P on the selector).  
The Digital Cockpit displays ››› Fig. 5.  
Ready: Vehicle ready to drive.  
Fig. 2 Digital Cockpit Display  
1. Enter the vehicle.  
The Digital Cockpit displays ››› Fig. 2.  
Comfort Ready: Air conditioning and info-  
tainment available.  
Fig. 4 Digital Cockpit Display  
Fig. 6 Digital Cockpit Display  
3. Select D or R on the gear selector  
The Digital Cockpit displays ››› Fig. 4.  
Ready: Vehicle ready to drive.  
2. Leave the vehicle (no need to press the  
button).  
The Digital Cockpit displays ››› Fig. 6.  
The vehicle is switched oꢀ by automatic  
driver detection  
Note  
NEW FEATURE WITH CUPRA! Possible to  
switch on the vehicle’s ignition without  
pressing the  
button.  
6
Ignition
Recognise whether the drive sys-  
tem is on or oꢀ  
Fig. 7 Digital Cockpit Display  
3. Activate door locking.  
The Digital Cockpit displays ››› Fig. 7.  
Note  
Fig. 9 Digital Cockpit Display  
NEW FEATURE WITH CUPRA! Possible to  
switch oꢀ the vehicle’s ignition without  
2. When the drive system is inactive, the Dig-  
ital Cockpit displays the CUPRA Born im-  
Fig. 8 Digital Cockpit Display  
pressing the  
button.  
age ››› Fig. 9  
1. When the drive system is switched on, the  
Digital Cockpit displays the speedometer /  
speed display ››› Fig. 8  
7
Quick start guide  
Infotainment  
Access route to the digital manual  
Fig. 10 Infotainment: Main menu in tile mode  
1. With the Main Menu in “tile”  
mode,  
press: Help  
> Vehicle wallet.  
Note  
As with most state-of-the-art computer and  
electronic equipment, in certain cases the  
system may need to be restarted to make  
sure that it operates correctly (e.g. display  
not conꢁgured correctly when viewing the  
digital manual). To do this, if appropriate,  
press and hold the On/Oꢀ button of the info-  
tainment system for approx. 15 seconds until  
the CUPRA logo appears on the display.  
8
Connectivity
Connectivity  
CUPRA CONNECT1)  
Registration process  
Use the My CUPRA App to register.  
Don’t have the My CUPRA App yet? Download  
it by scanning the QR code:  
Fig. 12 Android  
To make registration easier, watch the follow-  
ing video for a step-by-step explanation of the  
registration process:  
Fig. 11 iOS  
Fig. 14 CUPRA ID  
Fig. 13 Download the  
“How to register” video  
here.  
1
Create a CUPRA ID, log in and complete  
your proꢁle  
1)  
Not available on all markets.  
9
Quick start guide  
Fig. 16 Scan the QR code or enter the  
CUPRA ID credentials  
2.2 Scan the QR code generated by the Info-  
tainment system.  
2.3 Go to MyCUPRA App and select your pre-  
ferred Authorized Service (depending on  
the version).  
Fig. 15 Enter the vehicle identiꢀcation  
Fig. 17 Complete as primary user  
number  
3
Registration complete  
2
Link the vehicle to your CUPRA ID  
2.1 Enter the vehicle identiꢁcation number,  
accept the legal terms and conditions. Or-  
der service packs.  
10  
Electricalcharging  
LED indications  
White LED ››› Fig. 18  
Tips for maximising the vehicle's  
range  
Electrical charging  
Charging the high-voltage battery  
●
Flashing: Preparing the charging process.  
Pre-air condition the vehicle interior when  
charging to maximise range. This means that  
the energy needed to initially air condition the  
vehicle will not be taken from the battery.  
●
Fixed: Not charging  
Green LED ››› Fig. 18  
●
Flashing: The battery is charging.  
Whenever possible, use the heated seats  
instead of the heating system. The heated  
seats consume much less energy than the  
heating and avoid unnecessary loss of range.  
●
Fixed: Process completed without problems,  
full charge.  
●
Sparkling: If programmed charging has been  
activated, the charging process has not yet  
started.  
The the vehicle's range prediction is based  
on the usual use of the car. It does not con-  
sider gradients or the outside temperature.  
Constant and eꢀicient driving is recommended  
for optimal predictions.  
LED alternately ꢀashing green and red  
Fig. 18 Charging process indicator LED  
››› Fig. 18  
●
Emergency charging at reduced power due  
1. Make sure that the cable is connected cor-  
rectly (the cable must be locked by the ve-  
hicle). Start the process by following the  
instructions of the charging point.  
to a failure to recognize the charging connec-  
tor.  
Red LED ››› Fig. 18  
●
Fixed: Fault in the charging system. If it re-  
2. Check the charging status using the indica-  
tor light on the charging cover. For more  
information, see the sticker next to the  
charging socket itself or the "Charging the  
high-voltage battery" chapter of the user  
manual.  
mains on after several attempts, seek specialist  
assistance.  
NOTICE  
To end the charging process manually, press  
the open button on the central locking re-  
mote control or press Stop chargingin  
the infotainment system's e-Managermenu.  
You can now disconnect the cable. For more  
3. The connector remains locked during the  
charging process.  
4. At the end of the charging process, remove  
the cable and store it in the vehicle if nec-  
essary.  
information see chapter ››› page 72,  
Charging the high-voltage battery.  
11  
Quick start guide  
●
Or, open the vehicle settings:  
Other topics of interest  
How to pair a mobile phone  
Vehicle > Assistants > Park as-  
sist > Brakesand activate the function.  
To pair a mobile phone, see section  
››› page 258, Pair, connect and manage in  
the Phone Interface chapter.  
Multifunction steering wheel buttons  
Functions, usage logic. See chapters  
››› page 105, Functions and ››› page 156,  
Assistant systems.  
Head-up-Display (HUD)  
Windscreen Display with augmented reality  
(AR), see chapter ››› page 23, Head-up-  
Display (HUD).  
Cubic Portal  
Access the Cubic portal to purchase data  
for your vehicle. Create your account, add  
your vehicle identiꢁcation number (VIN) and  
choose from a range of data plans.  
Cubic website:  
Note  
If necessary, to release the parking brake so  
that the vehicle can be pushed:  
●
Press the brake pedal and select the N po-  
sition on the gear selector. Next, conꢁrm  
“Activate rolling” in the Infotainment System.  
12  

Related Topics

Popular Owner Manuals