2002-2008 Cupra Born SUV Quick start guide -> Electrical charging User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Quick start guide -> Electrical charging for Your Cupra Born SUV First Generation (2002-2008)

Electricalcharging  
LED indications  
White LED ››› Fig. 18  
Tips for maximising the vehicle's  
range  
Electrical charging  
Charging the high-voltage battery  
●
Flashing: Preparing the charging process.  
Pre-air condition the vehicle interior when  
charging to maximise range. This means that  
the energy needed to initially air condition the  
vehicle will not be taken from the battery.  
●
Fixed: Not charging  
Green LED ››› Fig. 18  
●
Flashing: The battery is charging.  
Whenever possible, use the heated seats  
instead of the heating system. The heated  
seats consume much less energy than the  
heating and avoid unnecessary loss of range.  
●
Fixed: Process completed without problems,  
full charge.  
●
Sparkling: If programmed charging has been  
activated, the charging process has not yet  
started.  
The the vehicle's range prediction is based  
on the usual use of the car. It does not con-  
sider gradients or the outside temperature.  
Constant and eꢀicient driving is recommended  
for optimal predictions.  
LED alternately ꢀashing green and red  
Fig. 18 Charging process indicator LED  
››› Fig. 18  
●
Emergency charging at reduced power due  
1. Make sure that the cable is connected cor-  
rectly (the cable must be locked by the ve-  
hicle). Start the process by following the  
instructions of the charging point.  
to a failure to recognize the charging connec-  
tor.  
Red LED ››› Fig. 18  
●
Fixed: Fault in the charging system. If it re-  
2. Check the charging status using the indica-  
tor light on the charging cover. For more  
information, see the sticker next to the  
charging socket itself or the "Charging the  
high-voltage battery" chapter of the user  
manual.  
mains on after several attempts, seek specialist  
assistance.  
NOTICE  
To end the charging process manually, press  
the open button on the central locking re-  
mote control or press Stop chargingin  
the infotainment system's e-Managermenu.  
You can now disconnect the cable. For more  
3. The connector remains locked during the  
charging process.  
4. At the end of the charging process, remove  
the cable and store it in the vehicle if nec-  
essary.  
information see chapter ››› page 72,  
Charging the high-voltage battery.  
11  

Related Topics

Popular Owner Manuals