2024-2026 Cupra Terramar SUV Lights -> Interior lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights -> Interior lights for Your Cupra Terramar SUV First Generation (2024-2026)

Lights
137
Interior lights
The light distribution of the headlights allows
the specic “tourist light” values to be met
without the need for stickers or changes being
made to the settings.
Note
“Tourist light” is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Interior lights
Lighting of the instrument cluster,
displays and controls
The instrument and control lighting brightness
can be set in the vehicle settings menu of the
infotainment system ›››
page39.
The set intensity automatically adapts to
changes in ambient brightness in the vehicle.
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, along with the
instrument and control lighting, depending on
the ambient brightness.
In some cases, e.g. when driving through a
tunnel without the automatic dipped beam
light
function switched on, the instrument
cluster lighting may even switch o. The objec-
tive of this function is to provide the driver with
a visual indication that he or she should acti-
vate the dipped beam. If your vehicle is tted
with a digital instrument cluster, the message
Turn on the lights will be displayed on the in-
strument cluster.
Interior and reading lights
Fig.104 Detail of headliner: front interior
lighting.
Turning the interior lights on or o.
Door contact connection. The interior
lights come on automatically when you
unlock the vehicle, open a door or dis-
connect the ignition. The light goes out
a few seconds after closing all the doors,
when locking the vehicle or connecting
the ignition.
Reading light
The reading light is touch-operated, each lens
is turned on and o individually by pressing in
the respective central area. In addition, the in-
tensity of the light can be adjusted according
to the pressure exerted.
If you want to turn on the two lenses together
you must press the symbol
›››Fig.104.
Glove compartment and luggage compart-
ment lighting
When opening and closing the glove compart-
ment on the front passenger side and the rear
lid, the respective light will automatically switch
on and o.
Footwell lighting
The lights in the footwell area below the dash
panel (driver and front passenger sides) will
switch on when the doors are opened and
will decrease in brightness while driving. This
brightness can be adjusted through the info-
tainment system menu using the function but-
ton > Lighting > Settings ›››page39.
Note
The reading lights go out when the vehicle
is closed and locked or after a few minutes
of turning the ignition o. This prevents the
battery from discharging.
138
Lights
Lighting prole
Individual
O
Background lighting
Fig.105 Schematic representation:
Background lighting.
Background lighting provides lighting in dier-
ent areas of the interior.
There are predened versions of Ambient
Light ›››
Fig.105.
The intensity of the lighting can be adjusted
using the function button :
Lights up the interior of the
vehicle depending on the selected lighting
prole.
To adjust the intensity of the back-
ground lighting in each of the areas as well
as to change the colour in the versions
that have lighting on the front door panel
and the instrument panel line.
Turns o the background lighting.
Additional functions of the background
lighting
●
Door open alert: Representation on the line
of the respective front door if the vehicle rea-
ches 10 km/h while either of the two front
doors is not closed properly.
●
Rear windows locked alert: Representation
on the line of the respective front door when
the operation buttons of the rear windows are
pressed, if they have been locked with the
safety button ›››page117 and the vehicle is
locked (Auto Lock).
●
Representation of the hazard warning
lights: Animation on the entire background
lighting line while the hazard warning light
function is active.
●
Representation of acceleration: Animation
on the entire background lighting line when
accelerating. This function is only represented
in the Cupra when the link between the back-
ground lighting and the drive prole is activa-
ted. If a door has been left open, the “Door
Open Alert” will be displayed at a speed above
10km/h.
The representation of these functions by the
background lighting can be switched on and
o both individually and as a whole in the info-
tainment system:
> Lighting > Settings.

Related Topics

Popular Owner Manuals