2024-2026 Cupra Terramar SUV Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance for Your Cupra Terramar SUV First Generation (2024-2026)

Maintenance
391
Service
Maintenance
Service
Service work and the Digital Main-
tenance Plan
Log of services performed (“Digital Mainte-
nance Plan”)
Specialised CUPRA dealers, SEAT dealerships
or a specialised workshop records Service re-
ceipts in a central system. Thanks to this
comprehensive documentation of the serv-
ice history, it is possible to view the services
performed any time. CUPRA recommends re-
questing a Service receipt after every service
carried out containing all the services on the
system.
Whenever there is a new service the receipt is
replaced with a current one.
The Digital Maintenance Plan is not available
in some markets. In this case, your special-
ised CUPRA dealer or a SEAT dealership will
inform you about the documentation of the
service work.
Service works
In the Digital Maintenance Plan, your special-
ised CUPRA dealer, SEAT dealership or a spe-
cialised workshop will document the following
information:
●
When each one of the services was carried
out.
●
Whether a specic repair has been sugges-
ted, e.g. changing the brake pads in the near
future.
●
If you have expressed a special request for
the maintenance. Your Service Advisor will
write the work order.
●
The components or uids that were
changed.
●
The date of the next service.
The Long Life Mobility Warranty is valid until
the next inspection. This information is docu-
mented in all checks performed.
The type and the volume of the service may
vary from one vehicle to another. A specialised
workshop will be able to provide specic infor-
mation on the jobs for your vehicle.
WARNING
If the services are insuicient or not per-
formed and if the service intervals are not
observed, the vehicle may be immobilised in
traic, which can cause an accident and se-
vere injuries.
●
Make sure that any repairs are carried out
by a specialised CUPRA dealer, a SEAT deal-
ership or a specialised workshop.
NOTICE
CUPRA accepts no liability for any damage
to the vehicle caused either by inadequate
workshop service or damage resulting from
the unavailability of spare parts.
Note
Regular services on the vehicle not only
maintain its value, but also its correct oper-
ation and road safety. For this reason, con-
duct the services in accordance with CUPRA
guidelines.
Set Service or Flexible Service In-
tervals
Services are classied as oil change service
and inspection. The service interval indicator
on the instrument cluster display serves as a
reminder of the next service.
Depending on the features, the engine and the
usage conditions of the car, either the Fixed
service or the Flexible service will be applied
for an oil change service.
How to know which type of service needs to
his vehicle
Check the tables below:
392
Maintenance
Oil change service
a)
PR No.
Type of
service
Service interval
QI1
Fixed
Every 5000km or after
1year
b)
QI2
Every 7,500km or after
1year
b)
QI3
Every 10,000km or af-
ter 1year
b)
QI4
Every 15,000km or af-
ter 1year
b)
QI6 Flexible
According to the service
interval indicator.
a)
The data are based on normal usage conditions.
b)
Whatever occurs rst.
Inspection Service
a)
According to the service interval indicator.
a)
The data are based on normal usage conditions.
Particular characteristics of the Flexible
Service
Regarding the Flexible Service the oil change
service only has to be performed when the ve-
hicle needs it. To calculate when you have to
carry out this service, take into account the in-
dividual usage conditions and personal driving
style. A major component of the exible serv-
ice is the use of LongLife oil instead of conven-
tional engine oil.
Bear in mind the information about the speci-
cations of the engine oil according to the VW
standard ›››
page361.
If you do not want to perform the exible
service you can select the xed service.
However, a xed service may aect service
costs. The Service Advisor will gladly advise
you.
Service interval indicator
At CUPRA, the dates of the services are indi-
cated by the service interval indicator on the
instrument cluster ›››page26 or in the Vehi-
cle settings menu of the infotainment system
›››page39.
The service interval indicator gives information
for service dates that involve an engine oil
change or an inspection. When the time for
the corresponding service comes, additional
work required, such as the change of brake
uid and the spark plugs, can be carried out.
Information about the terms of use
The service intervals and groups are usually
based on normal usage conditions.
If, on the other hand, the vehicle is under
adverse usage conditions, some of the work
must be carried out before the next service
period or even between service intervals.
Adverse usage conditions include:
●
The use of fuel with a high sulphur content.
●
Frequent short trips.
●
Letting the engine idle for a long period of
time, as in the case of taxis.
●
Using the vehicle in areas with thick dust.
●
Frequent driving with a trailer (depending on
equipment).
●
Using the vehicle mostly in situations with a
lot of traic and stops (e.g. in the city).
●
Using the vehicle mostly in winter.
This applies especially for the following parts
(depending on equipment):
●
Dust and pollen lter
●
AirCare allergen lter
●
Air lter
●
Toothed chain
●
Particulate lter
●
Engine oil
The Service Advisor of your specialised
workshop will gladly inform you about the
need to perform service work between normal
service intervals, always considering the usage
conditions of your vehicle.
Maintenance
393
Additional service oers
WARNING
If the services are insuicient or not per-
formed and if the service intervals are not
observed, the vehicle may be immobilised in
traic and cause accidents and severe inju-
ries.
●
Make sure that any repairs are carried out
by a specialised CUPRA dealer, a SEAT deal-
ership or a specialised workshop.
NOTICE
CUPRA cannot be held liable for any damage
to the vehicle due to insuicient work or lack
of availability of spare parts.
Service packages
Service packages include all the maintenance
works needed to ensure the safety and the
smooth running of the vehicle (depending on
the usage conditions and the features of the
vehicle, such as the engine, gearbox, or oper-
ating uids).
Maintenance services are divided into inspec-
tion and review services. Consult the details of
the jobs required for your vehicle at:
●
Your CUPRA dealer
●
Your SEAT dealership
●
Your specialised workshop
Due to technical reasons (continuous develop-
ment of components) the service packages
may vary. Your specialised CUPRA dealer, any
SEAT dealership or a specialised workshop al-
ways receives updated information about any
modications that are made.
Additional service oers
Approved spare parts
Original SEAT Spare Parts have been designed
for your vehicle and approved by SEAT, with
a special emphasis on safety. These parts
correspond exactly to the manufacturer's re-
quirements in terms of design, accuracy of
the measurements and materials. The original
SEAT Spare Parts have been designed exclu-
sively for your vehicle. For this reason, we al-
ways recommend the use of Original SEAT
Spare Parts. SEAT cannot be held liable for the
safety and suitability of parts from other manu-
facturers.
Approved spare parts
Approved spare parts, following the manufac-
turer's requirements, are an additional serv-
ice to you, oering the possibility of replac-
ing complete sets, such as: lightened engine,
gearboxes, heads, control units, electrical
components, etc.
These parts are, approved parts, and are the
same as the factory parts, which are also ap-
proved spare parts.
Original accessories
We recommend you only use CUPRA Original
Accessories and CUPRA approved accessories
for your vehicle. The reliability, safety and suit-
ability of these accessories have been inspec-
ted specically for this type of vehicle. CUPRA
cannot be held liable for the safety and suita-
bility of parts from other manufacturers.
Service Mobility
As of the moment you purchase your CUPRA
vehicle you will be able to enjoy the benets
and coverage of Service Mobility.
For the rst two years after the purchase, your
new CUPRA vehicle is automatically covered by
Service Mobility at no additional cost.
If you wish to enjoy this service after this pe-
riod, you can extend Service Mobility as long
as you carry out the recommended Inspec-
tion and Maintenance Services at a specialised
CUPRA Service or SEAT Oicial Service.
If your CUPRA vehicle is immobilised due to a
fault or an accident, our assistance services will
help you keep moving.
Take into account that Service Mobility diers
depending on the country where the vehicle
was purchased. For further information, ask
394
Maintenance
your specialised CUPRA dealer, any SEAT deal-
ership or visit the CUPRA website in your coun-
try.
Vehicle upkeep and
cleaning
Basic observations
Regular and careful care helps to maintain the
value of your vehicle. In addition, it may be-
come a prerequisite for a warranty claim in the
event of corrosion damage and deciencies in
the paint coat of the bodywork.
Specialised workshops have the necessary
care products. Please follow the application in-
structions on the packaging.
WARNING
●
Cleaning products and other materials
used for car care can be damaging to your
health if misused.
●
Always keep care products in a safe place,
out of the reach of children. Danger of poi-
soning!
For the sake of the environment
●
When purchasing car care products, chose
products that are compatible with the envi-
ronment.
●
The waste from car-care products should
not be disposed of with ordinary household
waste.
Washing the vehicle
The longer you take to clean o deposits, e.g.
remains of insects, bird excrements, tree resin
or road salt adhered to your vehicle, the more
damage it can cause to the surface. High tem-
peratures, for instance strong sunlight, further
intensify the damage.
Before washing the car, soften the dirt using
plenty of water.
To remove encrusted dirt such as insects, bird
droppings or tree resin, use a lot of water and a
microbre cloth.
Have the underside of the vehicle washed after
the end of the road salts in winter.
High pressure cleaning equipment
When washing the vehicle with a high-pressure
cleaner, always follow the operating instruc-
tions for the equipment. This applies particu-
larly to the operating pressure and the distance
between the water jet and the vehicle.
Do not aim the jet directly towards the side
windows, doors, sunroof or covers; the same
applies for the tyres, rubber hoses, damping
material, radar sensors or camera lenses. Keep
a distance of at least 40cm.
Do not remove snow and ice with a high-pres-
sure cleaner.
Do not use a nozzle that sprays the water out in
a direct stream or one that has a rotating jet for
forcing o dirt.
The water temperature must not exceed 60°C.
Automatic car washes
Spray the vehicle before starting the car wash.
Make sure that the windows and sunroof are
closed and the wipers are deactivated. Bear in
mind the instructions of the car wash tunnel
operator, especially if your vehicle has detach-
able parts.
Use car washes without brushes if possible.
Washing by hand
Clean your vehicle from top to bottom with a
soft sponge or with a brush. Only use cleaning
products that do not contain solvents.
Polishing
Polishing is only necessary when the vehicle's
paintwork has lost its gloss and cannot be re-
stored with care products.
Maintenance
395
Vehicle upkeep and cleaning
Do not polish matt painted surfaces! If the
paintwork is polished, the surface will be irrep-
arably damaged.
Washing vehicles with matte paintwork
To wash the vehicle, it is best to use a spe-
cial cleaner for matte paintwork. For further
information, please contact an oicial service
centre.
Apply the product by spraying it onto the body-
work. Work in one zone at a time and leave
the product to act for at least 2 minutes. Wipe
it with a microbre cloth and avoid placing ex-
cessive pressure on the treated area until the
dirt is removed. Once clean, repeat the appli-
cation of the product area by area and spread
it until a uniform nish is achieved.
If the vehicle is aected by mosquitoes or
larger amounts of dirt, spray the product on
the entire surface, leave it to act for 2 minutes
and apply pressurised water until it is com-
pletely clean. Once dry, apply the product one
zone at a time and spread it with microbre,
avoiding excessive pressure, to achieve a uni-
form nish.
In both cases, the nal application cares for
the vehicle in an optimal manner and provides
a protective layer against dirt and water.
WARNING
●
Only wash the vehicle with the ignition
switched o or according to the specica-
tions of the car wash tunnel operator. Acci-
dent hazard!
●
When cleaning the underbody or the inside
of the wheel arches, protect yourself from
sharp or pointy metal parts. Risk of cuts!
●
After cleaning, the brakes could act more
slowly due to moisture or, in winter, ice on
the brake discs and pads. Accident hazard! In
this case the brakes should be dried by press-
ing the brake pedal several times.
WARNING
Incorrect use of high-pressure cleaning
equipment can cause damage. This can lead
to accidents and serious injuries.
●
Never direct the jet of the high-pressure
cleaning equipment directly at the orange
high-voltage cables, the high-voltage system
components or the 12-volt on-board net-
work.
NOTICE
●
Before washing the vehicle in an automatic
car wash, the exterior mirrors should be fol-
ded in to prevent them from being damaged.
The electric folding exterior mirrors should
only be folded or unfolded electrically!
●
Do not wash the vehicle in direct sunlight.
Risk of damaging the paint job!
●
Do not use sponges, abrasive household
sponges or similar to clean insect remains.
Risk of damaging the surface!
●
Vehicle parts with matte paint:
–
Do not use polish or hard wax. Risk of
damaging the surface!
–
Never select washing programmes that
include the use of wax. This could damage
the appearance of matte paint.
–
Do not put stickers or magnets on parts
with matte paint, as removing them may
damage the paint.
For the sake of the environment
The car should only be washed in special
wash bays. These places are designed to pre-
vent oily water from getting into the public
drains.
Cleaning the exterior
Below can be found some recommendations
on the cleaning and upkeep of individual vehi-
cle components.
Go to your specialised workshop if you have
special questions or parts that are not listed.
Take the general considerations into account
›››
page397, Take special care with....
Windscreen wipers
●
Dirt: Soft cloth with windscreen cleaner.
396
Maintenance
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Headlights / Tail lights
●
Dirt: Soft sponge with neutral soap solution
1)
.
Sensors / Camera lenses
●
Dirt:
–
Sensors: soft cloth with a solvent-free
cleaning product.
–
Camera lenses: soft cloth with an alcohol-
free cleaning product.
●
Snow/ice: Hand brush/Solvent-free anti-
freeze spray
Wheels
●
Road salt: Water.
●
Brake abrasion dust: Special acid-free clean-
ing product.
Exhaust pipe ends
●
Road salt: Water, if a ne steel cleaning prod-
uct is required, or a non-abrasive and non-cor-
rosive cleaning product.
●
Dirt on painted exhaust pipes: Clean with a
soft cloth dampened with water or a non-abra-
sive, non-corrosive cleaning product.
Covers / Trims
●
Dirt: Neutral soap solution
1)
, if a ne steel
cleaning product is required.
Paint
●
Paint aws: Check the paint's colour code at
an authorised service and restore with a touch-
up pencil.
●
Spilled fuel: Immediately rinse with water.
●
Environmental rust deposit: Apply rust re-
mover and then apply hard wax. Go you your
specialised workshop if you have any queries.
●
Corrosion: Have your specialised workshop
take care of this.
●
Water does not form droplets on the clean
paint: Maintain with hard wax (at least twice a
year).
●
No shine despitemaintenance/unattractive
paint: Treat with suitable wax and apply paint
preservative afterwards if the wax used does
not contain preservative ingredients.
●
Tanks, e.g. insect remains, bird droppings,
tree sap, road salt: Immediately soak with water
and remove with a microbre cloth.
●
Grease-based dirt, e.g. cosmetic products or
sunscreen: Remove immediately with a neutral
soap solution
1)
and a soft cloth.
Carbon bre parts
●
Dirt: Clean in the same way as painted parts
›››
page394.
Decorative laminates
●
Dirt: Soft sponge with neutral soap solution
1)
.
Interior cleaning
Below can be found some recommendations
on the cleaning and upkeep of individual vehi-
cle components.
Go to your specialised workshop if you have
special questions or parts that are not listed.
Take the general considerations into account
›››
page397, Take special care with....
Windows
●
Dirt: Apply windscreen cleaner and then dry
with a cloth.
Covers / Trims
●
Dirt: Neutral soap solution
1)
.
Plastic parts
●
Dirt: Damp cloth.
●
Encrusted dirt: Neutral soap solution
1)
, if pos-
sible a solvent-free plastic cleaning product.
Displays/instrument cluster
●
Dirt: Soft cloth with a liquid crystal display
cleaner.
Maintenance
397
Vehicle upkeep and cleaning
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Control panels
●
Dirt: Soft brush, then a soft cloth with a neu-
tral soap solution
1)
.
Seat belts
●
Dirt: Neutral soap solution
1)
, allowed to dry
before retracting.
Fabrics, articial, Alcantara leather
●
Particles of dirt stuck to surfaces: Vacuum
cleaner.
●
Water-based dirt, e.g. coee, tea, blood etc.:
Absorbent cloth and neutral soap solution
1)
.
●
Grease-based dirt, e.g. oil, make-up, etc.:
Apply a neutral soap solution
1)
. Absorb the dis-
solved grease and paint particles by dryingwith
an absorbent cloth, if you have to treat it with
water afterwards.
●
Special dirt, e.g. pens, nail polish, spray paint,
shoe polish, etc.: Special stain remover: dry
with an absorbent cloth, if applicable, apply
neutral soap solution afterwards
1)
.
Natural leather
●
Recent dirt: Cotton cloth with neutral soap
solution
1)
.
●
Water-based dirt, e.g. coee, tea, blood etc.:
–
Recent stains: absorbent cloth.
–
Dry stains: stain remover suitable for
leather.
●
Grease-based dirt, e.g. oil, make-up, etc.:
–
Recent stains: absorbent cloth and suitable
stain remover for leather.
–
Dry stains: grease solvent spray.
●
Special dirt, e.g. pens, nail polish, spray paint,
shoe polish etc.: Stain remover suitable for
leather.
●
Care: Apply preservative cream regularly to
protect from sunlight. Use a coloured preser-
vative if required.
Carbon bre parts
●
Dirt: Clean as with plastic parts.
Take special care with...
Headlights/tail lights
●
Do not clean the headlights/tail lights with a
dry cloth or sponge.
●
Do not use cleaning products that contain
alcohol. Risk of cracks!
Wheels
●
Do not use paint wax or other abrasive prod-
ucts.
●
If the protective coating on the paint of the
rim has been damaged due to stone impacts,
scratches, etc., the damage should be repaired
immediately.
Camera lenses
●
Do not use hot or warm water to remove ice
or snow from the camera lenses. Risk of crack-
ing the lens!
●
To clean the camera lens, never use abrasive
cleaning products or products with alcohol.
Risk of scratches and cracks!
Radar sensors
●
Avoid aiming the jet of pressurised water at
the radar sensors.
●
Paint the bumpers only with CUPRA ap-
proved paint.
Windows
●
Remove snow and ice from windows and ex-
terior mirrors with a plastic scraper only. To
avoid scratches, the scraper should only be
pushed in one direction and not moved to and
fro.
398
Maintenance
●
Never remove snow or ice from windows and
rearview mirrors with warm or hot water. Risk of
cracks on the windows!
●
To prevent damage to the heating of the rear
window, do not put stickers over the heating
elements.
Covers/trims
●
Do not use cleaning products or chrome
based cleaning agents.
Paint
●
The vehicle must be free from dirt and dust
before applying wax or care products. Risk of
scratches!
●
Do not apply wax or care products if the ve-
hicle is exposed to direct sunlight. Risk of dam-
aging the paint job!
●
Environmental rust deposits must not be re-
moved by friction. Risk of damaging the paint
job!
●
Remove cosmetic products and suncream
immediately. Risk of damaging the paint job!
Displays/instrument cluster
●
The displays, the instrument cluster and the
trim around it must not be cleaned dry. Risk of
scratches!
●
Make sure that the instrument cluster is
switched o and cooled down before cleaning.
●
Make sure that no liquid leaks between the
instrument cluster and the trim. Risk of dam-
age!
Control panels
●
Make sure that no liquid leaks into the con-
trol panels. Risk of damage!
Seat belts
●
Do not remove the seat belts to clean them.
●
Seat belts and their components must never
be cleaned with chemical products, nor should
they be allowed to come into contact with cor-
rosive liquids, solvents or sharp objects. Risk of
damaging the fabric!
●
If you nd any damage to the belt webbing,
belt ttings, the belt retractor or the buckle,
ask your specialised workshop to replace the
belt in question.
Fabrics/articial leather/microbre
●
Do not treat articial leather/microbre with
leather cleaning products, solvents, wax polish,
shoe polish, stain removers or similar products.
●
If the stain is very hard to remove, take the
vehicle to a specialised workshop to have it
removed there. This will prevent damage.
●
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
●
Do not turn on seat heating to dry the seats.
●
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
●
Open Velcro, e.g. on clothes can damage the
seat upholstery. Make sure that Velcro fasten-
ers are closed.
Natural leather
●
Never use solvents, wax polish, shoe polish,
spot removers or similar products on leather.
●
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
●
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
●
Do not turn on seat heating to dry the seats.
●
Avoid exposing leather to direct sunlight for
long periods, otherwise it may tend to lose
some of its colour. If the car is left for a pro-
longed period in the bright sun, it is best to
cover the leather.
WARNING
Do not use water-repellent coatings on the
windscreen. In bad visibility conditions such
as humid weather, darkness or when the sun
is in its lowest point, visibility may be impac-
ted. Accident hazard! Such coatings can also
cause the windscreen wiper blades to make
noise.
Maintenance
399
Accessories, spare parts and repair work
Note
●
Remains of insects can be removed much
more easily with previously treated paint.
●
Regular car care treatments can prevent
deposits of environmental rust.
Taking your vehicle out of service
If you want to leave your vehicle stationary for a
long period of time, contact a qualied work-
shop. They will gladly inform you about the
necessary measures, such as anti-corrosion
protection, Service and storage.
Also take into account the indications relat-
ing to the vehicle’s battery ›››
page365 ,
›››page365, Introduction.
Accessories, spare parts
and repair work
Introduction
Always ask your dealer or specialist retailer for
advice before purchasing accessories and re-
placement parts.
Your vehicle is designed to oer a high stand-
ard of active and passive safety. For this rea-
son, we recommend that you ask a specialised
CUPRA Service or SEAT Oicial Service for ad-
vice before tting accessories or replacement
parts. Your Oicial Service has the latest in-
formation from the manufacturer and can rec-
ommend accessories and replacement parts
which are suitable for your requirements. They
can also answer any questions you might have
regarding oicial regulations.
We recommend only using CUPRA accesso-
ries and Genuine CUPRA parts®. Specialised
CUPRA Services or SEAT Oicial Services have
the necessary experience and facilities to en-
sure that the parts are installed correctly and
professionally.
Although CUPRA continuously monitors the
market, it cannot judge whether products not
authorised by CUPRA meet the vehicle’s re-
liability, safety and suitability requirements.
CUPRA therefore accepts no liability for these
products, even if, in certain cases, they are au-
thorised by an oicially recognised technical
inspection institute or oicial body.
Any retrotted equipment which has a di-
rect eect on the vehicle and/or the way it
is driven, such as a cruise control system or
electronically-controlled suspension, must
be approved for use in your vehicle and bear
the e mark (the European Union's authorisa-
tion symbol).
If any additional electrical devices are tted
which do not serve to control the vehicle itself
(for instance a refrigerator box, laptop or venti-
lator fan, etc.), they must bear the
marking
(manufacturer conformity declaration in the
European Union).
WARNING
Accessories, for example telephone holders
or drink holders, should never be tted on
the covers, or inside the operating range of
the airbags. Otherwise, there is a danger of
injury if the airbag is triggered in an accident.
Technical modications
Unauthorised modications to the electronic
components, software, wiring or data transfer
in the vehicle may cause malfunctioning.
We request your understanding that your spe-
cialised CUPRA dealer or SEAT dealership can-
not be held liable for any damage caused by
modications and/or work performed incor-
rectly in the vehicle.
We therefore recommend that all work should
be performed by a specialised CUPRA Serv-
ice or a SEAT Oicial Service using genuine
CUPRA parts®.
WARNING
Incorrectly performed modications or other
work on your vehicle can lead to malfunc-
tions and cause accidents.
400
Maintenance
Radio telephones and oice equip-
ment
Radio transmitters (xed installation)
Any retrot installations of radio transmitters
in the vehicle require prior approval. CUPRA
generally authorises in-vehicle installations of
approved types of radio transmitters provided
that:
●
The antenna is installed correctly.
●
The aerial is installed on the exterior of the
vehicle (and shielded cables are used together
with non-reective aerial trimming).
●
The eective transmitting power does not
exceed 10Watts at the aerial base.
A specialised CUPRA Service, SEAT Oicial
Service or specialised workshop will be able to
inform you about options for installing and op-
erating radio transmitters with a higher trans-
mitting power.
Mobile radio transmitters
Commercial mobile telephones or radio equip-
ment might interfere with the electronics of
your vehicle and cause malfunctions. This may
be due to:
●
No external aerial.
●
External aerial incorrectly installed.
●
Transmitting power more than 10 W.
Therefore you must not operate portable mo-
bile telephones or radio equipment inside the
vehicle without a properly installed external
aerial ›››
.
Please note also that the maximum range of
the equipment can only be achieved with an
external aerial.
Business equipment
Retrot installation of business or private
equipment in the vehicle is permitted, provi-
ded the equipment cannot interfere with the
driver's immediate control of the vehicle and
that any such equipment carries the mark.
Any retrot equipment that could inuence
the driver's control of the vehicle must have
a type approval for your vehicle and must carry
the e mark.
WARNING
Mobile telephones or radio equipment which
is operated inside the vehicle without a prop-
erly installed external aerial can create ex-
cessive magnetic elds that could cause a
health hazard.
Note
●
Retrotting electric and electronic equip-
ment in this vehicle aects its licence and
could lead to the withdrawal of the vehicle
registration document under certain circum-
stances.
●
Please follow the mobile telephone/radio
operating instructions.

Related Topics

Popular Owner Manuals