2024-2026 Cupra Terramar SUV Maintenance -> Vehicle upkeep and cleaning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Vehicle upkeep and cleaning for Your Cupra Terramar SUV First Generation (2024-2026)

394
Maintenance
your specialised CUPRA dealer, any SEAT deal-
ership or visit the CUPRA website in your coun-
try.
Vehicle upkeep and
cleaning
Basic observations
Regular and careful care helps to maintain the
value of your vehicle. In addition, it may be-
come a prerequisite for a warranty claim in the
event of corrosion damage and deciencies in
the paint coat of the bodywork.
Specialised workshops have the necessary
care products. Please follow the application in-
structions on the packaging.
WARNING
●
Cleaning products and other materials
used for car care can be damaging to your
health if misused.
●
Always keep care products in a safe place,
out of the reach of children. Danger of poi-
soning!
For the sake of the environment
●
When purchasing car care products, chose
products that are compatible with the envi-
ronment.
●
The waste from car-care products should
not be disposed of with ordinary household
waste.
Washing the vehicle
The longer you take to clean o deposits, e.g.
remains of insects, bird excrements, tree resin
or road salt adhered to your vehicle, the more
damage it can cause to the surface. High tem-
peratures, for instance strong sunlight, further
intensify the damage.
Before washing the car, soften the dirt using
plenty of water.
To remove encrusted dirt such as insects, bird
droppings or tree resin, use a lot of water and a
microbre cloth.
Have the underside of the vehicle washed after
the end of the road salts in winter.
High pressure cleaning equipment
When washing the vehicle with a high-pressure
cleaner, always follow the operating instruc-
tions for the equipment. This applies particu-
larly to the operating pressure and the distance
between the water jet and the vehicle.
Do not aim the jet directly towards the side
windows, doors, sunroof or covers; the same
applies for the tyres, rubber hoses, damping
material, radar sensors or camera lenses. Keep
a distance of at least 40cm.
Do not remove snow and ice with a high-pres-
sure cleaner.
Do not use a nozzle that sprays the water out in
a direct stream or one that has a rotating jet for
forcing o dirt.
The water temperature must not exceed 60°C.
Automatic car washes
Spray the vehicle before starting the car wash.
Make sure that the windows and sunroof are
closed and the wipers are deactivated. Bear in
mind the instructions of the car wash tunnel
operator, especially if your vehicle has detach-
able parts.
Use car washes without brushes if possible.
Washing by hand
Clean your vehicle from top to bottom with a
soft sponge or with a brush. Only use cleaning
products that do not contain solvents.
Polishing
Polishing is only necessary when the vehicle's
paintwork has lost its gloss and cannot be re-
stored with care products.
Maintenance
395
Vehicle upkeep and cleaning
Do not polish matt painted surfaces! If the
paintwork is polished, the surface will be irrep-
arably damaged.
Washing vehicles with matte paintwork
To wash the vehicle, it is best to use a spe-
cial cleaner for matte paintwork. For further
information, please contact an oicial service
centre.
Apply the product by spraying it onto the body-
work. Work in one zone at a time and leave
the product to act for at least 2 minutes. Wipe
it with a microbre cloth and avoid placing ex-
cessive pressure on the treated area until the
dirt is removed. Once clean, repeat the appli-
cation of the product area by area and spread
it until a uniform nish is achieved.
If the vehicle is aected by mosquitoes or
larger amounts of dirt, spray the product on
the entire surface, leave it to act for 2 minutes
and apply pressurised water until it is com-
pletely clean. Once dry, apply the product one
zone at a time and spread it with microbre,
avoiding excessive pressure, to achieve a uni-
form nish.
In both cases, the nal application cares for
the vehicle in an optimal manner and provides
a protective layer against dirt and water.
WARNING
●
Only wash the vehicle with the ignition
switched o or according to the specica-
tions of the car wash tunnel operator. Acci-
dent hazard!
●
When cleaning the underbody or the inside
of the wheel arches, protect yourself from
sharp or pointy metal parts. Risk of cuts!
●
After cleaning, the brakes could act more
slowly due to moisture or, in winter, ice on
the brake discs and pads. Accident hazard! In
this case the brakes should be dried by press-
ing the brake pedal several times.
WARNING
Incorrect use of high-pressure cleaning
equipment can cause damage. This can lead
to accidents and serious injuries.
●
Never direct the jet of the high-pressure
cleaning equipment directly at the orange
high-voltage cables, the high-voltage system
components or the 12-volt on-board net-
work.
NOTICE
●
Before washing the vehicle in an automatic
car wash, the exterior mirrors should be fol-
ded in to prevent them from being damaged.
The electric folding exterior mirrors should
only be folded or unfolded electrically!
●
Do not wash the vehicle in direct sunlight.
Risk of damaging the paint job!
●
Do not use sponges, abrasive household
sponges or similar to clean insect remains.
Risk of damaging the surface!
●
Vehicle parts with matte paint:
–
Do not use polish or hard wax. Risk of
damaging the surface!
–
Never select washing programmes that
include the use of wax. This could damage
the appearance of matte paint.
–
Do not put stickers or magnets on parts
with matte paint, as removing them may
damage the paint.
For the sake of the environment
The car should only be washed in special
wash bays. These places are designed to pre-
vent oily water from getting into the public
drains.
Cleaning the exterior
Below can be found some recommendations
on the cleaning and upkeep of individual vehi-
cle components.
Go to your specialised workshop if you have
special questions or parts that are not listed.
Take the general considerations into account
›››
page397, Take special care with....
Windscreen wipers
●
Dirt: Soft cloth with windscreen cleaner.
396
Maintenance
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Headlights / Tail lights
●
Dirt: Soft sponge with neutral soap solution
1)
.
Sensors / Camera lenses
●
Dirt:
–
Sensors: soft cloth with a solvent-free
cleaning product.
–
Camera lenses: soft cloth with an alcohol-
free cleaning product.
●
Snow/ice: Hand brush/Solvent-free anti-
freeze spray
Wheels
●
Road salt: Water.
●
Brake abrasion dust: Special acid-free clean-
ing product.
Exhaust pipe ends
●
Road salt: Water, if a ne steel cleaning prod-
uct is required, or a non-abrasive and non-cor-
rosive cleaning product.
●
Dirt on painted exhaust pipes: Clean with a
soft cloth dampened with water or a non-abra-
sive, non-corrosive cleaning product.
Covers / Trims
●
Dirt: Neutral soap solution
1)
, if a ne steel
cleaning product is required.
Paint
●
Paint aws: Check the paint's colour code at
an authorised service and restore with a touch-
up pencil.
●
Spilled fuel: Immediately rinse with water.
●
Environmental rust deposit: Apply rust re-
mover and then apply hard wax. Go you your
specialised workshop if you have any queries.
●
Corrosion: Have your specialised workshop
take care of this.
●
Water does not form droplets on the clean
paint: Maintain with hard wax (at least twice a
year).
●
No shine despitemaintenance/unattractive
paint: Treat with suitable wax and apply paint
preservative afterwards if the wax used does
not contain preservative ingredients.
●
Tanks, e.g. insect remains, bird droppings,
tree sap, road salt: Immediately soak with water
and remove with a microbre cloth.
●
Grease-based dirt, e.g. cosmetic products or
sunscreen: Remove immediately with a neutral
soap solution
1)
and a soft cloth.
Carbon bre parts
●
Dirt: Clean in the same way as painted parts
›››
page394.
Decorative laminates
●
Dirt: Soft sponge with neutral soap solution
1)
.
Interior cleaning
Below can be found some recommendations
on the cleaning and upkeep of individual vehi-
cle components.
Go to your specialised workshop if you have
special questions or parts that are not listed.
Take the general considerations into account
›››
page397, Take special care with....
Windows
●
Dirt: Apply windscreen cleaner and then dry
with a cloth.
Covers / Trims
●
Dirt: Neutral soap solution
1)
.
Plastic parts
●
Dirt: Damp cloth.
●
Encrusted dirt: Neutral soap solution
1)
, if pos-
sible a solvent-free plastic cleaning product.
Displays/instrument cluster
●
Dirt: Soft cloth with a liquid crystal display
cleaner.
Maintenance
397
Vehicle upkeep and cleaning
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Control panels
●
Dirt: Soft brush, then a soft cloth with a neu-
tral soap solution
1)
.
Seat belts
●
Dirt: Neutral soap solution
1)
, allowed to dry
before retracting.
Fabrics, articial, Alcantara leather
●
Particles of dirt stuck to surfaces: Vacuum
cleaner.
●
Water-based dirt, e.g. coee, tea, blood etc.:
Absorbent cloth and neutral soap solution
1)
.
●
Grease-based dirt, e.g. oil, make-up, etc.:
Apply a neutral soap solution
1)
. Absorb the dis-
solved grease and paint particles by dryingwith
an absorbent cloth, if you have to treat it with
water afterwards.
●
Special dirt, e.g. pens, nail polish, spray paint,
shoe polish, etc.: Special stain remover: dry
with an absorbent cloth, if applicable, apply
neutral soap solution afterwards
1)
.
Natural leather
●
Recent dirt: Cotton cloth with neutral soap
solution
1)
.
●
Water-based dirt, e.g. coee, tea, blood etc.:
–
Recent stains: absorbent cloth.
–
Dry stains: stain remover suitable for
leather.
●
Grease-based dirt, e.g. oil, make-up, etc.:
–
Recent stains: absorbent cloth and suitable
stain remover for leather.
–
Dry stains: grease solvent spray.
●
Special dirt, e.g. pens, nail polish, spray paint,
shoe polish etc.: Stain remover suitable for
leather.
●
Care: Apply preservative cream regularly to
protect from sunlight. Use a coloured preser-
vative if required.
Carbon bre parts
●
Dirt: Clean as with plastic parts.
Take special care with...
Headlights/tail lights
●
Do not clean the headlights/tail lights with a
dry cloth or sponge.
●
Do not use cleaning products that contain
alcohol. Risk of cracks!
Wheels
●
Do not use paint wax or other abrasive prod-
ucts.
●
If the protective coating on the paint of the
rim has been damaged due to stone impacts,
scratches, etc., the damage should be repaired
immediately.
Camera lenses
●
Do not use hot or warm water to remove ice
or snow from the camera lenses. Risk of crack-
ing the lens!
●
To clean the camera lens, never use abrasive
cleaning products or products with alcohol.
Risk of scratches and cracks!
Radar sensors
●
Avoid aiming the jet of pressurised water at
the radar sensors.
●
Paint the bumpers only with CUPRA ap-
proved paint.
Windows
●
Remove snow and ice from windows and ex-
terior mirrors with a plastic scraper only. To
avoid scratches, the scraper should only be
pushed in one direction and not moved to and
fro.
398
Maintenance
●
Never remove snow or ice from windows and
rearview mirrors with warm or hot water. Risk of
cracks on the windows!
●
To prevent damage to the heating of the rear
window, do not put stickers over the heating
elements.
Covers/trims
●
Do not use cleaning products or chrome
based cleaning agents.
Paint
●
The vehicle must be free from dirt and dust
before applying wax or care products. Risk of
scratches!
●
Do not apply wax or care products if the ve-
hicle is exposed to direct sunlight. Risk of dam-
aging the paint job!
●
Environmental rust deposits must not be re-
moved by friction. Risk of damaging the paint
job!
●
Remove cosmetic products and suncream
immediately. Risk of damaging the paint job!
Displays/instrument cluster
●
The displays, the instrument cluster and the
trim around it must not be cleaned dry. Risk of
scratches!
●
Make sure that the instrument cluster is
switched o and cooled down before cleaning.
●
Make sure that no liquid leaks between the
instrument cluster and the trim. Risk of dam-
age!
Control panels
●
Make sure that no liquid leaks into the con-
trol panels. Risk of damage!
Seat belts
●
Do not remove the seat belts to clean them.
●
Seat belts and their components must never
be cleaned with chemical products, nor should
they be allowed to come into contact with cor-
rosive liquids, solvents or sharp objects. Risk of
damaging the fabric!
●
If you nd any damage to the belt webbing,
belt ttings, the belt retractor or the buckle,
ask your specialised workshop to replace the
belt in question.
Fabrics/articial leather/microbre
●
Do not treat articial leather/microbre with
leather cleaning products, solvents, wax polish,
shoe polish, stain removers or similar products.
●
If the stain is very hard to remove, take the
vehicle to a specialised workshop to have it
removed there. This will prevent damage.
●
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
●
Do not turn on seat heating to dry the seats.
●
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
●
Open Velcro, e.g. on clothes can damage the
seat upholstery. Make sure that Velcro fasten-
ers are closed.
Natural leather
●
Never use solvents, wax polish, shoe polish,
spot removers or similar products on leather.
●
Sharp objects on clothing, such as zips, rivets
or belts can damage the surface.
●
Do not use steam cleaners, brushes, hard
sponges, etc. to clean.
●
Do not turn on seat heating to dry the seats.
●
Avoid exposing leather to direct sunlight for
long periods, otherwise it may tend to lose
some of its colour. If the car is left for a pro-
longed period in the bright sun, it is best to
cover the leather.
WARNING
Do not use water-repellent coatings on the
windscreen. In bad visibility conditions such
as humid weather, darkness or when the sun
is in its lowest point, visibility may be impac-
ted. Accident hazard! Such coatings can also
cause the windscreen wiper blades to make
noise.

Related Topics

Popular Owner Manuals