2010-2016 Dacia Duster SUV Getting to know your vehicle -> On-board computer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Getting to know your vehicle -> On-board computer for Your Dacia Duster SUV First Generation (2010-2016)

Jaune Noir Noir texte  
ON-BOARD COMPUTER (1/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
f) Estimated range  
Resetting the trip mileage  
g) Distance travelled  
h) Average speed  
To reset the trip mileage recorder, the  
display must show the Trip mileometer  
function.  
1
2
i) Oil change interval  
j) Reset the tyre pressure  
k) speed limiter.  
Press and hold button 2.  
l) Time  
m)Outside temperature information.  
Refer to the table on the following  
pages showing display examples.  
Trip computer and warning  
system 1  
Display selection key 2  
Press button 2 to repeatedly to scroll  
through the following information:  
a) Total mileage recorder  
b) Trip mileage recorder  
c) Fuel consumed  
d) Average fuel consumption  
e) Current fuel consumption  
1.51  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  
Jaune Noir Noir texte  
ON-BOARD COMPUTER (2/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
– You may also notice that the ave-  
Interpreting some of the  
values displayed after  
resetting  
rage fuel consumption increases  
when the vehicle is stationary and  
the engine idling.  
The values showing average fuel  
This is normal, since the computer  
consumption, range and average  
takes account of fuel used during  
speed will become more stable and re-  
idling.  
liable the further you travel after pres-  
sing the reset button.  
Manually resetting the journey para-  
meters: with the display showing one  
of the journey parameters, press the  
button 2 until the display is reset.  
For the first few miles after pressing  
the reset key you will notice that the  
range increases as you travel. This  
range takes into account the average  
fuel consumption since the last time the  
reset button was pressed. Therefore,  
the fuel consumption may decrease  
when:  
Automatically resetting the journey  
parameters: the reset is automatic  
when the capacity of one of the memo-  
ries is exceeded.  
– the vehicle stops accelerating,  
– the engine reaches its operating  
temperature (engine cold when  
reset button pressed),  
– when driving from a built-up area  
onto the open road.  
Therefore, if the average fuel  
consumption decreases, the  
range will increase.  
1.52  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  
Jaune Noir Noir texte  
ON-BOARD COMPUTER (3/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by  
repeatedly pressing 2  
Interpreting the display selected  
Display A  
Display B  
a) Total mileage recorder.  
b) Trip mileage recorder.  
–
–
c) Fuel used since the last time the reset button was pressed.  
d) Average fuel consumption since the last time the reset button was  
pressed.  
This value is displayed after driving 400 metres and takes into ac-  
count the distance travelled and the fuel used since the last time the  
reset button was pressed.  
1.53  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  
Jaune Noir Noir texte  
ON-BOARD COMPUTER (4/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by  
repeatedly pressing 2  
Interpreting the display selected  
Display A  
Display B  
e) Current fuel consumption.  
–
This value is displayed after a speed of approximately 20 mph  
(30 km/h) is reached.  
f) Estimated range with remaining fuel.  
This range takes into account the average fuel consumption since  
the last time the reset button was pressed.  
The value is displayed after driving around 400 metres.  
–
g) Distance travelled since the last time the reset button was pressed.  
–
–
h) Average speed since the last reset.  
The value is displayed after driving around 400 metres.  
1.54  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  
Jaune Noir Noir texte  
ON-BOARD COMPUTER (5/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by  
repeatedly pressing 2  
Interpreting the display selected  
Display A  
Display B  
j) Mileage before service  
Distance remaining until the next oil change.  
There are several scenarios:  
– mileage before oil change service less than 1000 miles Warning light  
Ê on the instrument panel comes on accompanied by the message  
“1000 miles”.  
– mileage before oil change service 0 miles. Warning light Ê on the  
instrument panel comes on accompanied by the message “--- miles”.  
The distance appears on the display for approximately 8 seconds when  
the ignition is switched on as soon as the distance is less than or equal  
to 1000 miles.  
The vehicle requires an oil change as soon as possible.  
Note: depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low  
speed, door-to-door journeys, extensive use at idle speed, towing a trailer etc.). The distance remaining until the next oil change  
can therefore decrease more quickly in some cases than the actual distance travelled.  
The oil change intervals are independent of the vehicle’s maintenance schedule: please refer to your vehicle’s maintenance do-  
cument.  
Resetting: to reset the mileage before an oil change, press and hold the display reset button for approximately 10 seconds until  
the display shows the range permanently.  
1.55  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  
Jaune Noir Noir texte  
ON-BOARD COMPUTER (6/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by  
repeatedly pressing 2  
Interpreting the display selected  
Display A  
Display B  
j) Tyre pressure reset.  
Please refer to the information on the “Tyre pressure loss warning” in  
Section 2.  
k) Recommended cruise control and speed limiter speed (if acti-  
vated).  
Refer to the information on the “Speed limiter” and “Cruise control”  
in Section 2.  
l) Time.  
m) Exterior temperature.  
1.56  
ENG_UD39241_4  
Ordinateur de bord (H79 Ph2 - Dacia)  
ENG_NU_1079-6_H79Ph2_Dacia_1  

Related Topics

Getting to know your vehicle
Keys, radio frequency remote control: general information Radio frequency remote control: use Locking and unlocking the doors Automatic locking when driving Opening and closing the doors Front headrests Front seats Seat belts Methods of restraint in addition to the front seat belts Side protection devices Additional methods of restraint Child safety: General information Child safety: choosing a child seat Child safety: mounting a child seat Child safety: fitting a child seat Rear view mirrors Driving position, Right-hand drive Warning lights Display and indicators Steering wheel, Power-assisted steering Clock Audible and visual signals Exterior lighting and signals Adjusting the headlight beam height Windscreen wash, wipe Fuel tank

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot