ELECTRIC WINDOWS (3/3)
One-touch windows
Operating faults
When the vehicle is equipped with this
function, the one-touch mode works in
addition to the operation of the electric
windows described previously.
In case of a fault when closing a window,
the system reverts to normal mode: pull
the switch concerned up to fully close
the window, then hold the switch (still
on the closure side) for three seconds
then lower and raise the window fully to
reinitialise the system.
It is only fitted to the driver’s window.
– Fully and briefly press down on the
relevant switch down: the window
will open completely.
If necessary, contact an approved
Dealer.
– Fully and briefly lift the relevant
switch: the window will close com-
pletely.
Pressing the switch again while the
window is moving will stop its move-
ment.
Special features
If the window detects resistance when
closing (e.g.: fingers, branch of a tree,
etc.) it stops and then lowers again by a
few centimetres.
If you use the switch while the window
is moving, it stops working.
Avoid resting any objects against
a half-open window: there is a risk
that the electric window could be
damaged.
Closing windows can cause
serious injury.
3.11
English 
