Jaune Noir Noir texte
CHANGING A WHEEL (1/2)
Offer up the jack 4 horizontally; the jack
head must be lined up with the sill 1,
closest to the wheel concerned, as
shown by arrow 2.
Vehicles equipped with a jack
and wheelbrace
If necessary, remove the hubcap.
Use the wheelbrace 3 to slacken off
the wheel bolts. Fit it so that you press
downwards rather than pulling up-
wards.
Crank up the jack 4 by hand at first to
align the base plate (which should be
inclined further inwards than the jack
head).
1
2
3
4
Turn the wheelbrace until the wheel lifts
off the ground.
If the vehicle is not equipped with a
jack or wheelbrace, you can obtain
these from your approved dealer.
Switch on the hazard warn-
ing lights.
Keep the vehicle away from
traffic and on a level surface
where it will not slip.
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
Apply the parking brake and engage
a gear (first or reverse).
Ask all passengers to leave the ve-
hicle and keep them away from traf-
fic.
your vehicle’s presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
To prevent any risk of injury
or damage to the vehicle,
only crank the jack until the
wheel you are replacing is
a maximum of 3 centimetres off the
ground.
5.9
ENG_UD34854_2
Changement de roue (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_5
Downloaded from manuals search engine
English 
