BONNET (1/2)
2
Please note when work-
ing close to the engine that
it may be hot. The engine
cooling fan may also start
3
at any moment. The
in the engine compartment reminds
you of this.
label
6
5
4
Risk of injury.
A
1
To open bonnet, open a door and pull
the 1 handle, located on the left-hand
side of the dashboard.
Opening the bonnet
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in the park position.
Lift the bonnet and release the stay 6
from its holder 3. For your own safety,
it is very important to fit the stay into its
retainer 5.
Unlocking the bonnet catch
To unlock, gently lift the bonnet and
push tab 4 in the direction of arrow A to
release the catch 2.
Risk of injury.
Closing the bonnet
Check that nothing has been left in the
engine compartment.
To close the bonnet, hold the bonnet
in the middle, replace the stay 6 in its
holder 3 then lower the bonnet to 30
cm above the closed position, then re-
lease it. It will latch automatically under
its own weight.
Before carrying out any op-
eration in the engine com-
partment, you must switch
off the ignition. ➥ 2.3
➥ 2.5.
Do not press down on the
bonnet: there is a risk that
the bonnet may accidentally
close.
4.2
English 
