2021-2026 Dacia Sandero 4 Door Technical specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Technical specifications for Your Dacia Sandero 4 Door Third Generation (2021-2026)

Section 6: Technical specifications  
Vehicle identification plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Engine identification plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Engine specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Towing weights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6.2  
6.3  
6.4  
6.6  
6.8  
6.8  
Replacement parts and repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.10  
Service sheets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.11  
Anticorrosion check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.17  
6.1  
VEHICLE IDENTIFICATION PLATES  
1
2
3
A
4
5
6
10  
9
A
7
8
The information shown on the ve-  
hicle identification plate should be  
quoted on all correspondence or  
orders.  
4 MAM (Maximum Authorised  
Mass).  
5 GTW (Gross train weight: vehicle  
fully loaded, with trailer).  
6 MPAW (Maximim Permissible  
Weight) for front axle.  
The presence and location of the in-  
formation depends on the vehicle.  
7 MPAW on rear axle.  
8 Reserved for related or additional  
entries.  
9 Not used.  
Vehicle identification plate A  
1 Manufacturer name.  
2 EC design number or approval  
number.  
10 Paint reference (colour code).  
3 Identification number.  
Depending on the vehicle, this  
information is also given on  
marking B.  
B
6.2  
ENGINE IDENTIFICATION PLATES  
A
2
1
A
3
A
Quote the information on the identi-  
fication plate or label A in all corre-  
spondence or when ordering parts.  
(Location varies depending on engine)  
1 Engine type.  
2 Engine suffix.  
3 Engine number.  
A
6.3  
DIMENSIONS (in metres) (1/2)  
1,536  
1,526 (1)  
0,819  
2,649  
4,396  
0,928  
1,758  
1,501 (*)  
1,530  
1,520 (1)  
(1) Depending on the vehicle  
(*) unladen  
6.4  
DIMENSIONS (in metres) (2/2)  
0,819  
0,830 (1)  
1,533  
1,520 (1)  
0,665  
2,604  
4,088  
1,754  
1,784 (1)  
4,099 (1)  
1,499*  
1,535 - 1,587**  
1,519  
1,509 (1)  
(1) Depending on the vehicle  
* Unladen  
** Unladen, with or without longitudinal roof bars  
6.5  
ENGINE SPECIFICATIONS (1/2)  
Versions  
1.0 12V  
1.0 TCe  
1.5 dCi  
Engine type  
B4D  
H4Dt  
K9K Turbo  
(see engine plate)  
Cubic capacity (cc)  
999  
1.461  
Diesel  
Petrol  
The label located in the fuel filler flap indi-  
cates the authorised fuels.  
Type of fuel  
Octane rating  
It is essential that you use unleaded petrol of the  
octane rating stated on the label inside the fuel filler  
flap.1.105  
Only use spark plugs specified for your vehicle’s  
engine.  
The type should be marked on a label stuck inside the  
engine compartment. If it is not then contact your au-  
thorised dealer.  
Spark plugs  
Fitting spark plugs other than those specified may  
damage the engine.  
6.6  
ENGINE SPECIFICATIONS (2/2)  
Versions  
1.0 12V  
1.0 TCe  
1.5 dCi  
Engine type  
B4D  
H4Dt  
K9K  
(see engine plate)  
Cubic capacity (cc)  
999  
1461  
Diesel fuel compliant with  
standard EN 590 contains  
up to 7% fatty acid methyl  
ester in volume.  
Unleaded petrol com-  
pliant with standard EN  
228 contains up to 5%  
ethanol in volume.  
Fuel types that meet  
European standards  
and are compatible  
with the engines  
of vehicles sold in  
Europe (in any other  
case, contact an  
Approved Dealer).  
Diesel fuel compliant with  
standard EN 16734 contains  
up to 10% fatty acid methyl  
ester in volume.  
Unleaded petrol com-  
pliant with standard EN  
228 contains up to 10%  
ethanol in volume.  
Diesel fuel compliant with  
standard EN 15940 contains  
up to 7% acid methyl ester in  
volume.  
6.7  
WEIGHTS (in kg) (1/2)  
The weights indicated are for a basic vehicle without optional extras: they vary according to your vehicle’s equipment.  
Consult an approved dealer.  
Four-door version  
Maximum Permissible All-Up Weight (MMAC)  
Maximum permissible all-up weight (MMTA)  
Gross Train Weight (MTR)  
Weights indicated on the vehicle identification plate.6.2  
Towing Weight Braked*  
Unbraked trailer weight*  
found by calculating: MTR - MMAC  
550 kg  
75 kg  
Permissible nose weight*  
Maximum permissible load on roof with a carrying device  
80 kg (including carrying equipment)  
* Towing weight (towing a caravan, boat, etc.)  
Towing is prohibited when the MTR - MMAC calculation is equal to zero, or when the MTR is equal to zero (or is not listed) on the  
identification plate.  
It is important to respect local towing regulations in force, specifically those set out in the Highway Code. Contact an approved  
Dealer for any modifications to towing equipment.  
When towing, under no circumstances may the total train weight (vehicle + trailer) be exceeded. However the following is  
permitted:  
rear axle MMTA exceeded by no more than 15%,  
maximum MMAC exceeded by no more than 10% or 100 kg (whichever is reached first).  
In either case, the maximum speed of the vehicle and trailer must not exceed 60 mph (100 km/h) and the tyre pressures must  
be increased by 0.2 bar (3 PSI).  
The engine output and climbing capability are reduced with altitude. We recommend that the maximum load be reduced by  
10% at an altitude of 1,000 metres and by an additional 10% for each 1,000 metres thereafter.  
6.8  
WEIGHTS (in kg) (2/2)  
The weights indicated are for a basic vehicle without optional extras: they vary according to your vehicle’s equipment.  
Consult an approved dealer.  
Five-door versions  
Maximum Permissible All-Up Weight (MMAC)  
Maximum permissible all-up weight (MMTA)  
Gross Train Weight (MTR)  
Weights indicated on the manufacturer’s plate (refer  
to Section 6 “Vehicle identification plate”)  
Towing Weight Braked*  
Unbraked trailer weight*  
Permissible nose weight*  
found by calculating: MTR - MMAC  
540 kg  
75 kg  
Maximum permissible load on roof with a carrying  
device  
80 kg (including carrying equipment)  
* Towing weight (towing a caravan, boat, etc.)  
Towing is prohibited when the MTR - MMAC calculation is equal to zero, or when the MTR is equal to zero (or is not listed) on the  
identification plate.  
It is important to respect local towing regulations in force, specifically those set out in the Highway Code. Contact an approved  
Dealer for any modifications to towing equipment.  
For vehicles fitted with a trailer, the total train weight (vehicle + trailer) must never be exceeded. However the following is  
tolerated:  
rear axle MMTA exceeded by no more than 15%,  
maximum MMAC exceeded by no more than 10% or 100 kg (whichever is reached first).  
In either case, the maximum speed of the vehicle and trailer must not exceed 60 mph (100 km/h) and the tyre pressures must  
be increased by 0.2 bar (3 PSI).  
The engine output and climbing capability are reduced with altitude. We recommend that the maximum load be reduced by  
10% at an altitude of 1,000 metres and by an additional 10% for each 1,000 metres thereafter.  
6.9  
REPLACEMENT PARTS AND REPAIRS  
Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same  
level of quality as the parts fitted originally.  
If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out  
within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the  
repair order.  
6.10  
SERVICE SHEETS (1/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.11  
SERVICE SHEETS (2/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.12  
SERVICE SHEETS (3/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.13  
SERVICE SHEETS (4/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.14  
SERVICE SHEETS (5/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.15  
SERVICE SHEETS (6/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.16  
ANTICORROSION CHECK (1/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.17  
ANTICORROSION CHECK (2/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.18  
ANTICORROSION CHECK (3/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.19  
ANTICORROSION CHECK (4/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.20  
ANTICORROSION CHECK (5/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.21  
ANTICORROSION CHECK (6/6)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.22  

Related Topics

Popular Owner Manuals