Instruments -> Service indicator for Your DS 7 Crossback 4 Door First Generation (2017-2022)

18  
01  
Instruments  
Black/white warning lamps  
Service spanner  
On temporarily when the ignition is  
►ꢀ Press and hold the button located on the end  
of the wiper control stalk.  
►ꢀ Switch on the ignition; a temporary display  
window appears and a countdown begins.  
►ꢀ When the display indicates =0, release the  
button; the spanner disappears.  
Automatic gearbox (EAT8) or Electric  
automatic gearbox (e-EAT8) (Hybrid)  
Fixed.  
The automatic gearbox is locked.  
You must press the Unlock button to unlock it.  
switched on.  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
Have your vehicle serviced very soon.  
Indicators  
Service spanner flashing  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, combined with the  
Service warning lamp.)  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
Service indicator  
The servicing information is expressed in terms of  
distance (kilometres or miles) and time (months  
or days).  
The alert is given at whichever of these two terms  
is reached first.  
Retrieving the servicing information  
You can view the servicing information by  
pressing the "Check / Diagnostic" button  
in the Driving / Vehicle touch screen menu.  
The servicing information is displayed in the  
instrument panel. Depending on the version of the  
vehicle:  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
If you have serviced your vehicle yourself:  
►ꢀ Switch off the ignition.  
Engine oil level indicator  
(Depending on version.)  
On versions fitted with an electric oil level  
indicator, the engine oil level status is displayed  
on the instrument panel for a few seconds upon  
switching the ignition on, after the servicing  
information, in the form of messages.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
The value indicated is calculated  
according to the distance covered and the  
time elapsed since the last service.  
The alert may also be triggered close to a due  
date.  
Oil level incorrect  
This is indicated by the display of a message  
prompting you to top up, accompanied by the  
19  
01  
Instruments  
lighting of the Service warning lamp and an  
audible signal.  
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
Engine coolant temperature  
indicator  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot function  
without AdBlue® fluid.  
For more information on Checking levels, refer to  
the corresponding section.  
Oil level indicator fault  
This is indicated by the display of the message  
"Oil level measurement invalid" on the instrument  
panel.  
When the level of AdBlue® falls below the reserve  
level (between 1,500 and 0 miles (2,400 and  
0 km)), a warning lamp lights up when the ignition  
is switched on and an estimate of the distance  
that can be travelled before engine starting is  
prevented is displayed in the instrument panel.  
Contact a dealer or a qualified workshop.  
In the event of a fault with the electric  
indicator, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located under the bonnet.  
With the engine running:  
– In zone A, the temperature is correct.  
– In zone B, the temperature is too high; the  
associated warning lamp and the central STOP  
warning lamp come on in red on the instrument  
panel, accompanied by the display of a message  
and an audible signal.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the engine  
until the minimum level of AdBlue® has been  
topped up.  
For more information on Checking levels, refer  
to the corresponding section.  
You must stop the vehicle as soon as it is safe to  
do so.  
Wait a few minutes before switching off the  
engine.  
Manually displaying the driving range  
While the driving range is greater than 1,500 miles  
(2,400 km), it is not displayed automatically.  
You can view the range information by  
pressing the "Check / Diagnostic" button  
in the touch screen’s Driving / Vehicle menu.  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
For more information on Checking levels,  
refer to the corresponding section.