168
07
Practical information
When the engine is hot, handle the
– Engine oil filler cap.
– Priming pump.
– Degassing screw.
exterior safety catch with care (risk of
burns), using the protected area.
When the bonnet is open, take care not to
damage the safety catch.
Petrol engine
Do not open the bonnet under very windy
conditions.
Cooling of the engine when stopped
The engine cooling fan may start after the
engine has been switched off.
Take care with objects or clothing that could
be caught in the blades of the fan!
►ꢀ From the outside: lift the safety catch and
raise the bonnet.
A bonnet strut opens the bonnet and holds it
open.
Diesel engine
Opening
Closing
►ꢀ Lower the bonnet and release it near the end
of its travel.
►ꢀ Check the locking.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water (rain,
washing, etc.) be limited.
1. Screenwash fluid reservoir
2. Engine coolant reservoir
3. Brake fluid reservoir
4. Battery / Fuses
Engine compartment
The engine represented is an example given for
illustration purposes only.
5. Remote earth point (-)
6. Fusebox
7. Air filter
►ꢀ From inside: pull the control lever, located on
the left below the dashboard, towards you.
8. Engine oil filler cap
9. Engine oil dipstick
The locations of the following elements may vary:
– Air filter.
– Engine oil dipstick.
English 
