124
Driving
06
Cruise control can also be paused
temporarily:
The speed is immediately shown on the
The system assists the driver by acting on
the steering, acceleration and braking
instrument panel as the new speed setting.
– by pressing the brake pedal.
within the physical limits and capacities of the
vehicle. Certain road infrastructure elements
or vehicles in the surroundings may not be
properly seen or may be poorly interpreted by
the camera and radar, resulting in an
Switching off
►ꢀ Turn the thumbwheel 1 to the "OFF" position:
the cruise control information disappears from
the screen.
– automatically, if the electronic stability
control (ESC) system is triggered.
Modifying the cruise speed
setting
unexpected change in direction, a lack of
steering correction and/or inappropriate
management of acceleration or braking.
Malfunction
Cruise control must be active.
To modify the cruise speed setting, based on the
current speed of the vehicle:
Primarily designed for driving on main
roads and motorways, this system only
works with moving vehicles driving in the same
direction as your vehicle.
►ꢀ Briefly press button 2 or 3 to change the value
in steps of + or - 1 mph (km/h).
In the event of a malfunction, dashes are
displayed flashing and then fixed instead of the
speed setting.
►ꢀ Press and hold button 2 or 3 to change the
value in steps of + or - 5 mph (km/h).
Pressing and holding button 2 or 3 results
in a rapid change in the speed of the
vehicle.
Have it checked by a dealer or a qualified
workshop.
Adaptive cruise control
For more information, refer to the General
recommendations on the use of driving
and manoeuvring aids and the Cruise control
- particular recommendations.
DS DRIVE ASSIST
Only available on versions with automatic
As a precaution, we recommend setting a
cruise speed fairly close to the current
gearbox.
speed of your vehicle, to avoid any sudden
acceleration or deceleration of the vehicle.
This system automatically adjusts the speed
and corrects the trajectory of the vehicle, using
Adaptive cruise control with Stop&Go function in
conjunction with Lane Positioning Assist.
These two functions must be activated and in
operation.
This system automatically maintains the vehicle
speed at a value set by the driver (speed setting),
while respecting a safety distance from the
vehicle in front (target vehicle) previously set by
the driver. The system automatically manages the
acceleration and deceleration of the vehicle.
With the Stop function, the system manages
braking until the vehicle comes to a complete
stop.
To modify the cruise speed setting using the
speed suggested by the Road signs recognition
shown on the instrument panel:
►ꢀ Press button 5 once; a message is displayed to
confirm the memorisation request.
►ꢀ Press button 5 again to save the suggested
speed.
For more information on Adaptive cruise
control and Lane Positioning Assist, refer to the
corresponding sections.
English 
