2017-2026 DS 7 4 Door Driving -> Reversing camera - 360 Vision User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Reversing camera - 360 Vision for Your DS 7 4 Door First Generation (2017-2026)

142  
Driving  
06  
Objects memorised during the manoeuvre  
will no longer be stored after switching off  
When starting the vehicle, the graphic  
and audible aids are only available after  
the touch screen has started up.  
the ignition.  
Deactivation/Activation  
Operating limits  
If the boot is heavily loaded, the vehicle may tilt,  
The settings are changed via  
the Driving/Vehicle touch screen menu.  
The system status is memorised when the ignition  
is switched off.  
affecting distance measurements.  
Malfunction  
In the event of a malfunction when  
With the engine running, these systems allow  
views of your vehicle’s close surroundings to be  
displayed on the touch screen using one camera  
for Reversing camera and two cameras for 360  
Vision.  
changing into reverse gear, one of  
these warning lamps lights up on the instrument  
panel, accompanied by the display of a message  
and an audible signal (short beep).  
Have it checked by a dealer or a qualified  
workshop.  
The rear parking sensors system will be  
deactivated automatically if a trailer or  
bicycle carrier is connected to a towing device  
installed in accordance with the  
Reversing camera - 360  
Vision  
For more information, refer to the General  
recommendations on the use of driving  
and manoeuvring aids.  
manufacturer's recommendations.  
In this case, the outline of a trailer is displayed  
at the rear of the image of the vehicle.  
The parking sensors are deactivated while the  
Park Assist and DS PARK PILOT functions are  
measuring a space.  
For more information on the Park Assist  
function or DS PARK PILOT function, refer to the  
corresponding section.  
The screen is divided into two parts with a  
contextual view and a view from above the vehicle  
in its close surroundings.  
143  
Driving  
06  
The parking sensors supplement the information  
on the view from above the vehicle.  
Various contextual views may be displayed:  
– Standard view.  
Using one or two cameras, the close surroundings  
of the vehicle are recorded whilst manoeuvring at  
low speed.  
Reversing camera  
Rear view  
An image from above your vehicle in its close  
surroundings is reconstructed (represented  
between the brackets) in real time and as the  
manoeuvre progresses.  
– 180° rear view - 360° front and rear view.  
– Zoom view.  
AUTO mode is activated by default.  
In this mode, the system chooses the best view to  
display (standard or zoom).  
It facilitates the alignment of your vehicle when  
parking and allows obstacles close to the vehicle  
to be seen. It is automatically deleted if the  
vehicle remains stationary for too long.  
With 360 Vision, the image is created using  
both cameras, when going forward and when  
reversing.  
You can change the type of view at any time  
during a manoeuvre.  
►ꢀ Press the button in the bottom left-hand  
corner of the touch screen.  
►ꢀ Select the type of view:  
To activate the camera located on the tailgate,  
engage reverse gear and do not exceed a speed of  
6 mph (10 km/h).  
• "Standard view".  
When the function is activated, it is possible  
that the view from above is not displayed. If  
the system is activated when the vehicle has  
already moved, the view from above can be fully  
displayed.  
• "180° view".  
• "Zoom view".  
The system is deactivated:  
• "AUTO view".  
– Automatically, at speeds above approximately  
6 mph (10 km/h),  
The display is immediately updated with the type  
of view selected.  
– Automatically, if the tailgate is opened.  
– Upon changing out of reverse gear (the image  
remains displayed for 7 seconds).  
– By pressing the white arrow in the upper-left  
corner of the touch screen.  
The system status is not saved when the ignition  
is switched off.  
Operating principle  
144  
Driving  
06  
AUTO mode  
The blue lines 1 represent the width of your  
vehicle, with the mirrors unfolded; their direction  
changes according to the position of the steering  
wheel.  
Obstacles may appear further away than  
they actually are.  
It is important to monitor the sides of the  
vehicle during the manoeuvre, using the  
mirrors.  
The red line 2 represents a distance of 30 cm  
from the rear bumper; the two blue lines 3 and 4  
represent 1 m and 2 m, respectively.  
This view is available with AUTO mode or in the  
view selection menu.  
Parking sensors also provide additional  
information about the area around the vehicle.  
180° view  
Zoom view  
This mode is activated by default.  
Using sensors in the rear bumper, the automatic  
view changes from the rear view (standard) to  
the view from above (zoom) as an obstacle is  
approached at the level of the red line (less than  
30 cm) during a manoeuvre.  
Standard view  
The camera records the vehicle's surroundings  
during the manoeuvre in order to create a  
view from above the rear of the vehicle in its  
near surroundings, allowing the vehicle to be  
manoeuvred around nearby obstacles.  
This view is available with AUTO mode or in the  
view selection menu.  
The 180° view facilitates reversing out of a  
parking space, making it possible to see the  
approach of vehicles, pedestrians and cyclists.  
This view is not recommended for carrying out a  
complete manoeuvre.  
It features 3 areas: left A, centre B and right C.  
The area behind the vehicle is displayed on the  
screen.  
145  
Driving  
06  
This view is only available via the view selection  
menu.  
– When shifting out of reverse (the front vision  
image replaces the rear vision image for 7  
seconds).  
►ꢀ Select "Visual parking assistance".  
AUTO mode is displayed by default, with front  
vision, if the gearbox is in neutral or with a gear  
engaged, or with rear vision, if reverse is engaged.  
The system is deactivated:  
360 Vision  
The vehicle has a camera at the front, fitted in the  
grille, and a camera at the rear, located close to  
the tailgate opening control.  
– By pressing the white arrow in the upper-left  
corner of the touch screen.  
– Automatically above about 19 mph (30 km/h)  
(the image disappears temporarily from 12 mph  
(20 km/h)).  
If a trailer or a bicycle carrier is fitted to  
the towball, the area behind the vehicle  
on the view from above goes dark.  
The surroundings are reconstructed by the  
front camera only.  
Using these cameras, the system displays the  
vehicle's near surroundings on the touch screen,  
offering views from the rear of the vehicle (rear  
vision) when reverse gear is engaged and views  
from the front of the vehicle (front vision) when  
the gearbox is in neutral or a gear is engaged.  
– By pressing the white arrow in the upper-left  
corner of the touch screen.  
AUTO mode  
The rear vision views are similar to those for the  
Reversing camera function.  
For more information on the Reversing  
camera function, refer to the corresponding  
section.  
Rear vision  
Front and rear vision  
This mode is activated by default.  
Using sensors in the front bumper, the automatic  
view changes from the front view (standard) to  
the view from above (zoom) as an obstacle is  
approached during a manoeuvre.  
The system activates automatically when reverse  
gear is engaged.  
The system is deactivated:  
– Automatically, at speeds above approximately  
6 mph (10 km/h).  
With the engine running and the speed  
below 12 mph (20 km/h), the system is  
activated via the Driving/Vehicle touch screen  
menu:  
146  
Driving  
06  
Standard view  
Zoom view  
180° view  
The area in front of your vehicle is displayed on  
the screen.  
The camera records the vehicle's surroundings  
during the manoeuvre in order to create a  
view from above the front of the vehicle in its  
near surroundings, allowing the vehicle to be  
manoeuvred around obstacles nearby.  
This view is available with AUTO mode or in the  
view selection menu.  
The orange lines 1 represent the width of your  
vehicle, with the mirrors unfolded; their direction  
changes according to the position of the steering  
wheel.  
The 180° view assists with exiting from a parking  
space in forward gear, making it possible to  
see the approach of vehicles, pedestrians and  
cyclists.  
The red line 2 represents a distance of 30 cm from  
the front bumper; the two orange lines 3 and 4  
represent 1 m and 2 m, respectively.  
This view is available with AUTO mode or in the  
view selection menu.  
Obstacles may appear further away than  
they actually are.  
This view is not recommended for carrying out a  
complete manoeuvre.  
It is important to check the sides of the vehicle  
during the manoeuvre, using the mirrors.  
The parking sensors also supplement the  
information on the vehicle's surroundings.  
It consists of 3 areas: left A, centre B and right C.  
This view is available only from the view selection  
menu.  
Park Assist  
For more information, refer to the General  
recommendations on the use of driving  
and manoeuvring aids.  

Related Topics

Driving
Driving recommendations Starting/switching off the engine Starting rechargeable hybrid vehicles Electric parking brake Automatic gearbox e-EAT8 automatic gearbox (Rechargeable hybrid) DS ACTIVE SCAN SUSPENSION Driving modes Hill start assist Gear shift indicator Stop & Start Under-inflation detection Driving and manoeuvring aids - General recommendations Road signs recognition Speed limiter Cruise control - Specific recommendations Programmable cruise control DS DRIVE ASSIST Adaptive cruise control Lane positioning assist Active Safety Brake with Collision Risk Alert Distraction detection Lane departure warning system Active lane departure warning system Blind spot monitoring Parking sensors Park Assist DS PARK PILOT

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot