2017-2026 DS 7 4 Door Ease of use and comfort -> Front seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Ease of use and comfort -> Front seats for Your DS 7 4 Door First Generation (2017-2026)

44  
03  
Ease of use and comfort  
►ꢀ Depending on equipment, press lug A or button  
B and then, while still pressing, lower the head  
restraint.  
Never drive with the head restraints  
removed; they should be in place and  
adjusted for the occupant of the seat.  
When driving  
Maintain a good driving position and hold the  
steering wheel with both hands at the 'quarter to  
three' position, so that you can easily and quickly  
reach the controls behind and near the steering  
wheel.  
The head restraint is correctly adjusted  
when its upper edge is level with the top  
of the head.  
Before moving the seat backwards,  
ensure that there is no person or object  
that might prevent the full travel of the seat.  
There is a risk of trapping or pinching  
passengers if present in the rear seats or of  
jamming the seat if large objects are placed on  
the floor behind the seat.  
Never adjust the seats or steering wheel  
when driving.  
Adjusting the angle  
Always keep your feet on the floor.  
(Depending on equipment)  
Forwards:  
►ꢀ move the lower part of the head restraint  
forwards.  
Front seats  
Manually-adjustable seats  
Rearwards:  
►ꢀ press and hold button B and push the lower  
part of the head restraint rearwards.  
Front head restraints  
Longitudinal  
Removing a head restraint  
►ꢀ Pull the head restraint fully up.  
►ꢀ Depending on equipment, press lug A or C to  
release the head restraint and raise it fully.  
►ꢀ Stow the head restraint securely.  
Refitting a head restraint  
►ꢀ Raise the control bar and slide the seat  
forwards or backwards.  
►ꢀ Insert the head restraint rods into the guides  
in the corresponding seat backrest.  
Adjusting the height  
►ꢀ Release the control bar to lock the seat in  
position on one of the notches.  
►ꢀ Push the head restraint fully down.  
Upwards:  
►ꢀ If the vehicle is so equipped, press lug Aor C to  
release the head restraint and push it down.  
►ꢀ Adjust the height of the head restraint.  
►ꢀ Pull the head restraint up to the desired  
position; you can feel the head restraint clicking  
into position.  
Downwards:  
45  
03  
Ease of use and comfort  
Height  
Longitudinal  
►ꢀ Tilt the rear of the control upwards or  
downwards to obtain the required height.  
►ꢀ Tilt the front of the control upwards or  
downwards to obtain the required angle.  
Additional adjustments  
Electric lumbar adjustment  
►ꢀ Pull the control upwards to raise or push it  
downwards to lower, until you obtain the position  
required.  
►ꢀ Push the control forwards or backwards to  
slide the seat.  
Backrest angle  
Backrest angle  
"2-way" adjustment  
►ꢀ Press and hold the front or rear of the  
control to increase or reduce the lumbar  
support.  
"4-way" adjustment  
►ꢀ Tilt the control forwards or rearwards.  
The control allows independent adjustment of the  
depth and vertical position of the lumbar support.  
►ꢀ Press and hold the front or rear of the  
control to increase or reduce the lumbar  
support.  
►ꢀ Turn the knob to obtain the desired angle.  
Cushion height and angle  
Electrically-adjustable seats  
To avoid draining the battery, carry out  
these adjustments with the engine  
running.  
►ꢀ Press and hold the top or bottom of the control  
to raise or lower the lumbar support area.  
46  
03  
Ease of use and comfort  
Seat cushion length  
It records the electric adjustments made to the  
seat and door mirrors.  
The recalling of stored positions is deactivated 45  
seconds after switching off the ignition.  
Welcome function  
The welcome function makes it easier to get in  
and out of the vehicle.  
After switching off the ignition and opening the  
driver’s door, the front seat moves backwards  
automatically and then stays in this position,  
ready for the next entry into the vehicle.  
When switching on the ignition, the front seat  
moves forwards to the stored driving position.  
►ꢀ Pull the handle forwards to release the  
cushion, then move the front part of the cushion  
forwards or backwards.  
Using buttons M/1/2  
►ꢀ Enter the vehicle and switch the ignition on.  
►ꢀ Adjust your seat and the door mirrors.  
►ꢀ Press button M, then press button 1 or 2 within  
4 seconds.  
While the seat is moving, take care that  
no person or object hinders the automatic  
movement of the seat.  
Seat cushion angle  
This electric adjustment control is present on  
"AGR" certified manually-adjustable seats.  
An audible signal confirms the memorisation.  
Memorising a new position cancels the previous  
position.  
Heated seats  
The function is active only with the engine  
Recalling a stored position  
running.  
The type and location of the controls depend on  
the vehicle configuration.  
While the seat is moving, take care that  
no person or object hinders the automatic  
movement of the seat.  
Heated seats with DS CONNECT RADIO  
With the ignition on or engine running  
►ꢀ Press button 1 or 2 to recall the corresponding  
position.  
►ꢀ Press and hold the front or rear of the button  
to raise or lower the front part of the seat cushion.  
Memorising driving positions  
An audible signal sounds when adjustment is  
complete.  
Associated with the electrically-adjusted driver’s  
seat, this function allows two driving positions to  
be memorised, to make these adjustments easier  
if there are frequent driver changes.  
You can interrupt the current movement by  
pressing button M, 1 or 2 or by using one of the  
seat adjustment controls.  
A stored position cannot be recalled while driving.  
47  
03  
Ease of use and comfort  
The control knob is located in the central storage  
►ꢀ Press this button to activate the  
– Never use the heating function if the seat  
compartment.  
ventilation function of the corresponding  
is damp.  
►ꢀ Turn the knob to switch on and select a  
seat.  
setting:  
►ꢀ Each press of a button changes the level of  
heating or ventilation; the corresponding number  
of indicator lamps come on (low/medium/high).  
►ꢀ To deactivate, press the button again until all  
the indicator lamps are off.  
Multipoint massage  
System with a choice of type of massage and  
• 0 = off.  
• 1 = low.  
adjustment of its intensity.  
• 2 = medium.  
• 3 = high.  
This system operates with the engine running, as  
well as in STOP mode of the Stop & Start.  
The massage settings are adjusted via the touch  
screen.  
The status of the function is saved when the  
ignition is switched off.  
Heated seats with NAVIGATION  
The control buttons are displayed in the side  
banners of the touch screen.  
Do not use the function when the seat is  
not occupied.  
The system is switched on, either directly using  
the button on the front seat, or by activating a  
personalised ambience with the DS SENSORIAL  
DRIVE function.  
►ꢀ Press the button corresponding to your  
seat.  
Reduce the heating intensity as soon as  
possible.  
►ꢀ Each press changes the level of heating; the  
corresponding number of indicator lamps come on  
(low/medium/high).  
When the seat and passenger compartment  
have reached a satisfactory temperature,  
switch the function off; reducing electrical  
consumption in turn decreases energy  
consumption.  
Using the button on the front seat:  
►ꢀ Press this button; its indicator lamp  
comes on.  
►ꢀ Press the button again until all the indicator  
lamps are off.  
The system is immediately activated with the last  
settings used and the settings page is displayed  
on the touch screen.  
The status of the function is saved when the  
ignition is switched off.  
Prolonged use of heated seats is not  
recommended for people with sensitive  
skin.  
If the settings suit you and you make no changes,  
the display returns to its original state.  
The multipoint massages are also  
managed by the DS SENSORIAL DRIVE  
function.  
Heated and ventilated seats with  
NAVIGATION  
There is a risk of burns for people whose  
perception of heat is impaired (e.g. illness,  
taking medication).  
The control buttons are displayed permanently in  
the side banners of the touch screen.  
►ꢀ Press one of these buttons to  
display the heating and ventilation  
settings page for the front seats.  
In the settings page:  
For more information on the DS SENSORIAL DRIVE  
function, refer to the corresponding section.  
To modify the settings:  
To keep the heated pad intact and to prevent a  
short circuit:  
– Do not place heavy or sharp objects on the  
seat.  
►ꢀ Select another type of massage from the five  
offered.  
►ꢀ Press this button to activate the  
heating function of the corresponding  
seat.  
– Do not kneel or stand on the seat.  
– Do not spill liquids onto the seat.  

Related Topics

Popular Owner Manuals