187
08
In the event of a breakdown
After changing a wheel
Changing a bulb
Store the punctured wheel in the boot or,
depending on version, remove the central cover
first to store it beneath the floor in place of the
spare wheel.
In some weather conditions (e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
after the lamps have been on for a few
minutes.
With a "space-saver" type spare wheel
Never look too closely at the light beam of
LED technology lamps - risk of serious eye
injury!
►ꢀ Lower the vehicle again fully.
►ꢀ Fold jack 6 and remove it.
Deactivate certain driving aid functions (Active
Safety Brake, Adaptive cruise control, etc.).
Do not exceed the maximum authorised speed
of 50 mph (80 km/h) or the maximum distance
of 50 miles (80 km).
Driving with more than one "space-saver" type
spare wheel is prohibited.
Visit a dealer or a qualified workshop.
Have the tightening of the spare wheel's
bolts and its tyre pressure checked.
Have the punctured tyre examined. After
inspection, the technician will advise you on
whether the tyre can be repaired or if it must
be replaced.
The headlamps have polycarbonate
lenses with a protective coating:
►ꢀ Tighten the security bolt using the
wheelbrace 5 equipped with a security socket 2.
►ꢀ Tighten the other bolts using the wheelbrace 5
only.
–
Do not clean them with a dry or abrasive
cloth, nor with detergent or solvent products.
– Use a sponge and soapy water or a pH
neutral product.
►ꢀ Refit the bolt covers to each of the bolts
(depending on equipment).
– When using a high-pressure washer on
persistent marks, do not keep the lance
directed towards the headlamps, lamps or
their edges for too long, so as not to damage
their protective coating and seals.
►ꢀ Store the tools.
English 
