190
08
In the event of a breakdown
The replacement of a fuse by a third party
could cause a serious malfunction of the
vehicle.
Installing electrical accessories
The vehicle's electrical system is
designed to operate with standard or optional
equipment.
Before fitting other electrical equipment or
accessories to your vehicle, contact a dealer or
a qualified workshop.
►ꢀ Using the opening tool, unclip the cover of
the access flap on the rear screw thread of the
towing eye, then pull it towards you.
►ꢀ Disconnect the harness.
The Manufacturer accepts no
responsibility for the cost incurred in
repairing the vehicle or for rectifying
malfunctions resulting from the installation of
accessories not supplied or not approved by it
and not installed in accordance with its
specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds 10
milliamperes.
For each lamp:
►ꢀ Turn the bulb holder a quarter turn anti-
clockwise and remove it.
12 V battery
Procedure for starting the engine using another
►ꢀ Insert the screwdriver head diagonally in the
cylindrical guide until you reach the lamp unit
fixing bolt.
►ꢀ Remove the bulb and replace it.
battery or for charging a discharged battery.
►ꢀ Slacken the bolt by about 10 turns then pull
the lamp unit to release it from the bumper.
Fuses
Changing a fuse
All work must be carried out only by a
dealer or a qualified workshop.
English 
