2017-2026 DS 7 4 Door Instruments -> Indicators User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments -> Indicators for Your DS 7 4 Door First Generation (2017-2026)

18  
01  
Instruments  
Front foglamps  
Black/white warning lamps  
Service spanner  
On temporarily when the ignition is  
Fixed.  
Automatic gearbox or Electric automatic  
gearbox (e-EAT8) (Rechargeable hybrid)  
Fixed.  
The front foglamps are on.  
switched on.  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
DS NIGHT VISION  
Fixed.  
The automatic gearbox is locked.  
You must press the Unlock button to unlock it.  
(grey)  
The function is activated, but not available.  
Fixed.  
Have your vehicle serviced very soon.  
Indicators  
The function is active.  
All of the conditions are met: the system is  
operating.  
Service spanner flashing  
Flashing then fixed, when the  
Service indicator  
The servicing information is expressed in terms of  
distance (miles or kilometres) and time (months  
or days).  
For more information, refer to the Lighting and  
visibility section.  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with the  
Service warning lamp.)  
Automatic headlamp dipping  
Fixed.  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
The alert is given at whichever of these two terms  
is reached first.  
The function has been activated via  
the touch screen (Driving/Vehicle menu).  
The lighting control stalk is in the "AUTO" position.  
For more information, refer to the Lighting and  
visibility section.  
The servicing information is displayed in the  
instrument panel. Depending on the version of the  
vehicle:  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
If you have serviced your vehicle yourself:  
►ꢀ Switch off the ignition.  
Blue warning/indicator lamps  
Main beam headlamps  
Fixed.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
The lamps are on.  
eSave function (Rechargeable hybrid)  
Fixed, accompanied by the reserved  
electric range.  
The value indicated is calculated  
according to the distance covered and the  
time elapsed since the last service.  
The alert may also be triggered close to a due  
date.  
The eSave function is activated.  
19  
01  
Instruments  
►ꢀ Press and hold the button located on the end  
of the wiper control stalk.  
If a low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
– In zone A, the temperature is correct.  
– In zone B, the temperature is too high.  
The associated warning lamp and the  
STOP warning lamp light up in red on the  
instrument panel, accompanied by the display of  
a message and an audible signal.  
You must stop the vehicle as soon as it is safe to  
do so.  
►ꢀ Switch on the ignition; a temporary display  
window appears and a countdown begins.  
►ꢀ When the display indicates =0, release the  
button; the spanner disappears.  
For more information on Checking levels, refer to  
the corresponding section.  
Oil gauge malfunction  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
This is indicated by the message "Oil level  
measurement invalid" on the instrument panel.  
Contact a dealer or a qualified workshop.  
Wait a few minutes before switching off the  
engine.  
In the event of a malfunction of the  
electric gauge, the oil level is no longer  
monitored.  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
Reminder of the servicing information  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located in the engine compartment.  
For more information on Checking levels, refer  
to the corresponding section.  
You can view the servicing information by  
pressing the "Check/Diagnostic" button in  
the Driving/Vehicle touch screen menu.  
For more information on Checking levels,  
refer to the corresponding section.  
Engine oil level indicator  
(Depending on version)  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot function  
without AdBlue® fluid.  
When the level of AdBlue® falls below the reserve  
level (between 1,500 and 0 miles (2,400 and  
0 km)), a warning lamp lights up when the ignition  
is switched on and an estimate of the distance  
that can be travelled before engine starting is  
prevented is displayed in the instrument panel.  
On versions fitted with an electric gauge,  
the engine oil level status is displayed on the  
instrument panel for a few seconds when the  
ignition is switched on, after the servicing  
information, in the form of messages.  
Coolant temperature indicator  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
Low oil level  
This is indicated by a message prompting you  
to top up the level, accompanied by the lighting  
of the Service warning lamp and an audible signal.  
With the engine running:  
20  
01  
Instruments  
The engine starting prevention system  
Malfunction of the SCR emissions control  
system  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the engine  
until the minimum level of AdBlue® has been  
topped up.  
Malfunction detection  
Top up.  
Between  
1,500 miles  
and 500  
If a malfunction is detected,  
these warning lamps come on,  
accompanied by an audible  
signal and the display of an  
"Emissions control fault"  
message.  
miles (2,400  
km and 800  
km)  
Manual display of driving range  
While the driving range is greater than 1,500 miles  
(2,400 km), it is not displayed automatically.  
You can view the range information by  
Top up as soon Between  
The alert is triggered while driving when the fault  
is detected for the first time, and thereafter when  
switching on the ignition for subsequent journeys,  
for as long as the cause of the fault persists.  
as possible.  
500 miles  
and 62 miles  
(800 km and  
100 km)  
pressing the "Check/Diagnostic" button in  
the Driving/Vehicle touch screen menu.  
Actions required related to a lack of  
AdBlue®  
If the fault is temporary, the alert  
disappears during the next journey, after  
self-diagnostic checks of the SCR emissions  
control system.  
A top-up is  
Between 62  
miles and 0  
miles (100  
km and 0  
km)  
The following warning lamps light up when the  
quantity of AdBlue® is below the reserve level:  
driving range of 1,500 miles (2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to avoid  
engine starting being prevented. Refer to the  
Warning and indicator lamps section for details of  
the messages displayed.  
vital, there is  
a risk that the  
engine will  
be prevented  
from starting.  
Malfunction confirmed during the permitted  
driving phase (between 685 miles and 0 miles  
(1,100 km and 0 km))  
To be able to  
restart the  
0 miles (km)  
If the fault indication is still displayed  
engine, add at  
least 5 litres of  
AdBlue® to the  
tank.  
permanently after 31 miles (50 km) of driving, the  
fault in the SCR system is confirmed.  
For more information on AdBlue®  
(BlueHDi) and in particular on topping up,  
refer to the corresponding section.  
The AdBlue warning lamp flashes and a message  
is displayed ("Emissions control fault: starting  
prevented in X miles (kms)"), indicating the  
driving range in miles or kilometres.  
21  
01  
Instruments  
While driving, the message is displayed every 30  
seconds. The alert is repeated when switching on  
the ignition.  
Charge level indicator  
(Rechargeable hybrid)  
POWER High power demand, using the combined  
capabilities of the petrol engine and the  
electric motor(s) (depending on version).  
The slider is located in this zone during  
more dynamic driving phases when  
high levels of performance are being  
demanded.  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting prevention  
system is triggered.  
Have it checked by a dealer or a qualified  
workshop.  
ECO  
Optimal use of energy (internal  
combustion or electric).  
The slider is located in this zone when  
driving under electric power and when  
optimal use is being made of the petrol  
engine, both accessible by adopting a  
suitable driving style.  
Starting prevented  
Every time the ignition is switched on, the  
message "Emissions control fault: Starting  
prevented" is displayed.  
The charge level of the traction battery and  
the remaining range in electric driving mode  
are permanently displayed when the vehicle is  
switched on.  
To restart the engine  
A symbol indicates the threshold at  
which the petrol engine will restart.  
The driver can therefore moderate their  
acceleration to remain in electric driving  
mode.  
Contact a dealer or a qualified workshop.  
The range displayed depends on the use  
of the vehicle (type of driving and speed),  
the outside temperature and the activated  
comfort equipment.  
Power indicator (Rechargeable  
hybrid)  
CHARGE Energy recovery for partly recharging the  
traction battery.  
The power indicator shows in real time the power  
The slider is located in this zone during  
deceleration: taking your foot off the  
accelerator pedal or braking.  
demanded from the vehicle.  
Manual test  
There are 3 zones:  
This function allows you to check certain  
indicators and display the alerts log.  
It can be accessed via the "Check/  
Diagnostic" button in the Driving/Vehicle  
touch screen menu.  
The following information is displayed on the  
instrument panel:  
– Engine oil level.  
– Next service due.  
– Tyre pressures.  

Related Topics

Popular Owner Manuals