22
01
Instruments
– Driving range associated with the AdBlue® and
the SCR system (BlueHDi Diesel).
– Current alerts.
With DS CONNECT RADIO
►ꢀ Press this button to select the Settings
menu.
►ꢀ Press this button to select the Settings
menu.
►ꢀ Select "Turn off screen".
►ꢀ Select "Brightness".
This information is also displayed
automatically every time the ignition is
switched on.
The screen goes off completely.
►ꢀ Press the screen again (anywhere on its
surface) to turn it on.
►ꢀ Adjust the brightness by pressing the
arrows or moving the slider.
The settings are applied immediately.
►ꢀ Press outside the settings window to exit.
You can also switch off the screen:
►ꢀ Press this button to select the Settings
menu.
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
►ꢀ Select "Dark".
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
Data displayed on the
instrument panel
Trip computer data is permanently displayed
when the "Personal" display mode is selected.
In all other display modes, pressing the end of the
wiper control stalk will cause this data to appear
temporarily in a specific window.
The screen goes off completely.
►ꢀ Press the screen again (anywhere on its
surface) to turn it on.
When travelling abroad, you may have to
change the distance units (km or miles):
the road speed must be displayed in the local
country’s official unit (km/h or mph).
The unit is changed via the screen
configuration menu, with the vehicle
stationary.
With NAVIGATION
With the lamps switched on:
►ꢀ Press this button to select the Settings
menu.
Displaying the different tabs
►ꢀ Select "OPTIONS".
►ꢀ Select "Screen configuration".
►ꢀ Select the "Brightness” tab.
►ꢀ Adjust the instrument panel and screen
brightness by using the arrows or moving
the slider.
Lighting dimmer
This system allows the brightness of the
instruments and controls to be adjusted to suit
the ambient light level.
►ꢀ Press this button to save and exit.
You can also switch off the screen:
English 
