73
04
Lighting and visibility
►ꢀ In the Driving/Vehicle touch screen
menu, select "Adaptive lighting".
"Road" mode
Malfunction
If a malfunction occurs with the system or
the camera, this warning lamp lights up on
the instrument panel, accompanied by an audible
signal and a message.
Operation
"City" mode
Have it checked by a dealer or a qualified
workshop.
Adaptive Frontlight
System
This lighting provides a higher light beam, an
increased intensity of the headlamps and a
decreased intensity of the modules.
Available only on versions equipped with Full LED
technology headlamps.
The range of this lighting is approximately 240 m.
This mode is activated once the vehicle has
been moving for more than 2 seconds at a speed
between 31 and 68 mph (50 and 110 km/h).
This function has several lighting modes, specific
to each driving situation.
The headlamps provide medium-intensity
illumination supplemented by the modules facing
outwards.
The intensity and direction of the main headlamps
and the modules vary so as to increase or reduce
the range of the lighting.
"Motorway" mode
The width of the beam is increased to allow you to
better distinguish hazards on the side of the road
(pedestrians, intersections).
The modules rotate and tilt so as to expand and
direct the light beam to increase or decrease the
lighting up of the sides of the road.
The range of this lighting is approximately 230 m.
This mode is activated once the vehicle has
been moving for more than 3 seconds at a speed
between 0 and 31 mph (50 km/h).
This function is a driving aid which
cannot, in any circumstances, replace the
need for vigilance on the part of the driver who
must continually adapt the driving of the
vehicle to the visibility and traffic conditions.
The headlamps and modules create a cone of light
with a high beam, suitable for fast roads.
The range of this lighting is approximately 280 m.
This mode is activated if the vehicle has been
moving for more than 5 seconds above 68 mph
(110 km/h) and is deactivated if the vehicle has
Activation/Deactivation
►ꢀ Place the ring of the lighting control stalk in
the "AUTO" position.