70
04
Lighting and visibility
To avoid dazzling other road users, the height
of these headlamp beams must be adjusted
according to the load in the vehicle.
Parking lamps
(Depending on version)
Automatic illumination of
lamps
Vehicle side marking by lighting the sidelamps on
the traffic side only.
0
(Initial setting)
With the lighting control stalk in the “AUTO”
position and if a low level of exterior brightness
is detected by the rain/sunshine sensor, the
sidelamps and dipped beam headlamps are
switched on automatically, without any action on
the part of the driver. They may also come on if
rain is detected, at the same time as automatic
operation of the windscreen wipers.
Driver only or driver + front passenger
5 people
►ꢀ Within one minute after switching off the
ignition, operate the lighting control stalk
upwards or downwards, depending on the side of
the traffic (e.g. when parking on the right, push
the lighting control stalk down to light up on the
left).
1
2
3
5 people + load in the boot
Driver only + load in the boot
4 5 6 Not used
This is confirmed by an audible signal and the
lighting of the corresponding direction indicator
lamp on the instrument panel.
Automatic adjustment of the
Full LED technology headlamps
This system automatically adjusts the height of
the headlamp beams according to the load in the
vehicle.
As soon as the brightness returns to a sufficient
level or after the windscreen wipers are switched
off, the lamps are switched off automatically.
►ꢀ To switch off the parking lamps, return the
lighting control stalk to the central position.
Malfunction
In the event of a malfunction, this warning
lamp lights up on the instrument panel,
accompanied by the display of a message and an
audible signal.
In the event of a malfunction of the rain/
sunshine sensor, the vehicle’s lamps come
on and this warning lamp is displayed on the
instrument panel, accompanied by an audible
signal and/or the display of a message.
Have it checked by a dealer or a qualified
workshop.
Headlamp beam height
adjustment
The system places the headlamp beams in the
lowest position.
Manual adjustment of halogen
and Xenon headlamps
Have it checked by a dealer or a qualified
workshop.
Do not cover the rain/sunshine sensor
located at the top centre of the
Do not touch the "Full LED" technology
headlamps - risk of electrocution!
windscreen behind the interior rear view
mirror; the associated functions would no
longer be controlled.
In fog or snow, the rain/sunshine sensor
may detect sufficient light. For this
English 
