99
Safety
05
(b) Tilt the seat backrest to 45°, then install the
child seat.
Straighten the backrest until it contacts the
child seat's backrest.
i-Size child seats
i-Size child seats have two latches that are anchored to the two rings A.
These i-Size child seats also have:
– either an upper strap that is attached to ring B.
– or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.
Their role is to prevent the child seat from tipping forward in the event of a collision.
For more information on the ISOFIX mountings, refer to the corresponding section.
In accordance with European regulations, this table indicates the options for installing i-Size child seats on seats in the vehicle fitted with ISOFIX mountings
approved for i-Size.
Seat
Front passenger airbag
Deactivated "OFF"
Activated "ON"
i-Size restraint system
Row 1 (a)
Manually-adjustable passenger seat (b)
i-U
i-UF
Electrically-adjustable passenger seat
Deactivated "OFF"
Activated "ON"
Not i-Size
Not i-Size
i-U
Row 2
Rear outer seats
Rear central seat
Not i-Size
(a)
Refer to the current legislation in your
country before placing a child in this seat
i-U:
suitable for forward facing and rearward
facing "Universal" i-Size restraint systems.
Manual child lock
The system prevents a rear door from being
position.
i-UF: only suitable for forward facing
(b)
Tilt the seat backrest to 45°, then install
the child seat.
opened using its interior handle.
"Universal" i-Size restraint systems.
The red control is located on the edge of each rear
door (marked by a label).
X:
seat position not suitable for "Universal"
i-Size restraint systems.
Straighten the backrest until it makes
contact with the child seat's backrest.
English 
