95
Safety
05
The 2 latches on ISOFIX child seats are secured
to them.
This ISOFIX mounting system provides fast,
"ISOFIX" mountings
The seats shown below are fitted with ISOFIX
reliable and safe fitting of the child seat in the
vehicle.
– One ring B, located behind the seat, called the
TOP TETHER, for attaching seats fitted with an
upper strap.
compliant mountings:
To secure the child seat to the TOP TETHER:
►ꢀ Remove and stow the head restraint before
installing the child seat on this seat (refit it once
the child seat has been removed).
►ꢀ Pass the strap of the child seat behind the
seat backrest, centring it between the openings
for the head restraint rods.
►ꢀ Secure the upper strap hook to ring B.
►ꢀ Tighten the upper strap.
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the centre
rear seat belt towards the middle of the
vehicle, so as to avoid the seat interfering with
the operation of the seat belt.
* The electrically-adjusted front passenger seat
does not have ISOFIX mountings.
Front seat
The mountings comprise three rings for each
seat, indicated by a marking:
– Two rings A, located between the vehicle seat
backrest and cushion.
An incorrectly installed child seat in a
vehicle compromises the child's safety in
the event of an accident.
Strictly observe the fitting instructions
provided in the user guide supplied with the
child seat.
** Depending on country of sale.
Rear seats
For information about the options for
fitting ISOFIX child seats in your vehicle,
refer to the summary table.
This system prevents the child seat from tipping
forwards in the event of a front impact.
English 
