2020-2024 DS 9 4 Door Instruments -> Lighting dimmer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments -> Lighting dimmer for Your DS 9 4 Door First Generation (2020-2024)

18  
01  
Instruments  
It can be accessed via the "Check/  
CHARGE Energy recovery for partly recharging  
the traction battery.  
Lighting dimmer  
This system allows the brightness of the  
instruments and controls to be adjusted manually  
to suit the ambient light level.  
Diagnostic" button in the Driving/Vehicle  
touch screen menu.  
The slider is located in this zone during  
deceleration: taking your foot off the  
accelerator pedal or braking.  
The following information is displayed on the  
instrument panel:  
– Engine oil level.  
With DS CONNECT RADIO  
– Next service due.  
Charge level indicator  
(Rechargeable hybrid)  
►ꢀ Press this button to select the Settings  
menu.  
– Tyre pressures.  
– Current alerts.  
►ꢀ Select "Brightness".  
This information is also displayed  
automatically every time the ignition is  
switched on.  
►ꢀ Adjust the brightness by pressing the  
arrows or moving the slider.  
The settings are applied immediately.  
►ꢀ Press outside the settings window to exit.  
You can also switch off the screen:  
►ꢀ Press this button to select the Settings  
menu.  
Total distance recorder  
The total distance recorder measures the total  
distance travelled by the vehicle since its initial  
registration.  
►ꢀ Select "Dark".  
The charge level of the traction battery and  
the remaining range in electric driving mode  
are permanently displayed when the vehicle is  
switched on.  
With the ignition on, the total distance is  
displayed at all times. It remains displayed for  
30 seconds after switching off the ignition. It is  
displayed when the driver's door is opened, and  
when the vehicle is locked or unlocked.  
The screen goes off completely.  
►ꢀ Press the screen again (anywhere on its  
surface) to turn it on.  
The range displayed depends on the use  
of the vehicle (type of driving and speed),  
the outside temperature and the activated  
comfort equipment.  
With NAVIGATION  
With the lamps switched on:  
►ꢀ Press this button to select the Settings  
menu.  
When travelling abroad, you may have to  
change the distance units (miles or km):  
the displayed speed must be in the local  
country’s official unit (mph or km/h).  
The unit is changed via the screen's  
configuration menu, with the vehicle  
stationary.  
►ꢀ Select "OPTIONS".  
►ꢀ Select "Screen configuration".  
Manual test  
This function allows you to check certain  
►ꢀ Select the "Brightness” tab.  
indicators and display the alerts log.  
19  
01  
Instruments  
►ꢀ Adjust the instrument panel and screen  
brightness by using the arrows or moving  
Definitions  
the slider.  
Range  
►ꢀ Press this button to save and exit.  
(miles or km)  
Distance that can still be travelled with the  
fuel remaining in the tank (based on the  
average fuel consumption over the last few miles  
(kilometres) travelled).  
You can also switch off the screen:  
►ꢀ Press this button to select the Settings  
menu.  
►ꢀ Select "Turn off screen".  
This value may vary following a change in driving  
style or terrain, leading to a significant change in  
current fuel consumption.  
►ꢀ Pressing the button located on the end of the  
wiper control stalk displays the following tabs in  
turn:  
The screen goes off completely.  
►ꢀ Press the screen again (anywhere on its  
surface) to turn it on.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
– Current information:  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
• Total driving range (Petrol).  
• Current consumption (Petrol).  
• Time counter for Stop & Start (Petrol).  
• Percentage of the current journey travelled  
in all-electric driving mode (Rechargeable  
hybrid).  
Trip computer  
Displays information related to the current trip  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Contact a dealer or a qualified workshop.  
(range, fuel consumption, average speed, etc.).  
Data displayed on the  
instrument panel  
– Trips "1" then "2":  
Current consumption  
• Average speed.  
Trip computer data is permanently displayed  
when the "Personal" display mode is selected.  
In all other display modes, pressing the end of the  
wiper control stalk will cause this data to appear  
temporarily in a specific window.  
(mpg or l/100 km or km/l)  
• Average fuel consumption.  
• Distance travelled.  
Calculated during the last few seconds.  
This function is only displayed at speeds above 19  
mph (30 km/h).  
Trip reset  
►ꢀ When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used in  
the same way.  
Displaying the different tabs  
Average consumption  
(mpg or l/100 km or km/l)  
Calculated since the last trip computer  
reset.  

Related Topics

Popular Owner Manuals