18
01
Instruments
It can be accessed via the "Check/
CHARGE Energy recovery for partly recharging
the traction battery.
Lighting dimmer
This system allows the brightness of the
instruments and controls to be adjusted manually
to suit the ambient light level.
Diagnostic" button in the Driving/Vehicle
touch screen menu.
The slider is located in this zone during
deceleration: taking your foot off the
accelerator pedal or braking.
The following information is displayed on the
instrument panel:
– Engine oil level.
With DS CONNECT RADIO
– Next service due.
Charge level indicator
(Rechargeable hybrid)
►ꢀ Press this button to select the Settings
menu.
– Tyre pressures.
– Current alerts.
►ꢀ Select "Brightness".
This information is also displayed
automatically every time the ignition is
switched on.
►ꢀ Adjust the brightness by pressing the
arrows or moving the slider.
The settings are applied immediately.
►ꢀ Press outside the settings window to exit.
You can also switch off the screen:
►ꢀ Press this button to select the Settings
menu.
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
►ꢀ Select "Dark".
The charge level of the traction battery and
the remaining range in electric driving mode
are permanently displayed when the vehicle is
switched on.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
The screen goes off completely.
►ꢀ Press the screen again (anywhere on its
surface) to turn it on.
The range displayed depends on the use
of the vehicle (type of driving and speed),
the outside temperature and the activated
comfort equipment.
With NAVIGATION
With the lamps switched on:
►ꢀ Press this button to select the Settings
menu.
When travelling abroad, you may have to
change the distance units (miles or km):
the displayed speed must be in the local
country’s official unit (mph or km/h).
The unit is changed via the screen's
configuration menu, with the vehicle
stationary.
►ꢀ Select "OPTIONS".
►ꢀ Select "Screen configuration".
Manual test
This function allows you to check certain
►ꢀ Select the "Brightness” tab.
indicators and display the alerts log.
English 
