Get Getting To Know Your Instrument Panel -> Control Panel and Instruments Guide for Fiat 124 Spider 2 Door Second Generation (2016-2020)

This page is intentionally left blank

76

GETTING TO KNOW YOUR INSTRUMENT PANEL

CONTROL PANEL AND

INSTRUMENTS . . . . . . . . . . . . . .78

MAINTENANCE MONITOR — IF

EQUIPPED . . . . . . . . . . . . . . . . .84

FUEL ECONOMY MONITOR — IF

EQUIPPED . . . . . . . . . . . . . . . . .88

WARNING LIGHTS AND

MESSAGES . . . . . . . . . . . . . . . .89

PERSONALIZATION FEATURES . .108

ONBOARD DIAGNOSTIC SYSTEM —

OBD II . . . . . . . . . . . . . . . . . . .112

EMISSIONS INSPECTION AND

MAINTENANCE PROGRAMS . . . .113

77

CONTROL PANEL AND INSTRUMENTS

Instrument Cluster

05020100-667-333

Instrument Cluster

1 — Odometer/Trip Computer And Trip Computer Button/Dashboard Illumination

2 — Tachometer

3 — Speedometer

4 — Automatic Transmission Info Display

5 — Odometer/Trip Computer Info/Engine Coolant Temperature Gauge/Fuel Gauge/Outside Temperature/Cruise Control/Info

Switch Display

78

Odometer/Trip Computer

When “Trip A” is selected, pushing the

selector again within one second will

change to “Trip B” mode. When “Trip A”

is selected, TRIP A will be displayed.

When “Trip B” is selected, TRIP B will

be displayed.

illumination is dimmed. When the

position lights are turned on, the

warning light in the instrument

cluster illuminates (see “Headlights” in

“Getting To Know Your Vehicle”

chapter).

The display mode can be changed from

odometer to “Trip computer A” to “Trip

computer B” and then back to

odometer by pushing the selector.

The trip computer records the total

distance the vehicle is driven until the

meter is again reset. Return it to “0.0”

by depressing and holding the selector

for one second or more.

Brightness Adjustment

The selected mode will be displayed.

The brightness of the instrument panel

and dashboard illuminations can be

adjusted by rotating the knob:

The brightness decreases by rotating

the knob to the left. A beep will be

heard when the knob has been rotated

to the maximum dim position.

Use this meter to measure trip

distances and to compute fuel

consumption.

Note: Only the trip records tenths of

miles (kilometers).

The brightness increases by rotating

the knob to the right.

Trip Computer Reset

The trip computer will be erased when:

05020102-121-001

Odometer/Trip Reset Button

The power supply is interrupted

(blown fuse or the battery is

disconnected).

1 — Odometer/Trip Reset Button

The vehicle is driven over

9999.9 miles.

Odometer

The odometer records the total

distance the vehicle has been driven.

Speedometer

Trip Computer

The speedometer indicates the speed

of the vehicle.

The trip computer can record the total

distance of two trips. One is recorded in

“Trip A”, and the other is recorded in

“Trip B”.

05020102-121-001

Dimmer Knob

Instrument Panel

Illumination

1 — Instrument Cluster Illumination

Dimmer Knob

When the position lights are turned on

with the ignition switched ON, the

brightness of the instrument panel

For instance, “Trip A” can record the

distance from the point of origin, and

“Trip B” can record the distance from

where the fuel tank is filled.

79

Canceling Illumination Dimmer

Note:

Even though the distance-to-empty

display may indicate a sufficient

amount of remaining driving distance

before refueling is required, refuel as

soon as possible if the fuel level is very

low or the low fuel warning light

illuminates.

With the ignition ON, rotate the knob to

the right until a beep sounds while the

instrument cluster is dimmed. If the

instrument cluster's visibility is reduced

due to glare from surrounding

brightness, cancel the illumination

dimmer.

When the illumination dimmer is

The display may not change unless

you add more than approximately

2.3 gallons (9 liters) of fuel.

canceled, the instrument cluster cannot

be dimmed even if the position lights

are turned on. When the illumination

dimmer is canceled, the screen in the

center display switches to constant

display of the daytime screen.

0620500-122-001

Instrument Cluster Display Controls

The distance-to-empty is the

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

(indicating the remaining fuel supply)

disappear.

Distance-To-Empty Mode

This mode displays the approximate

distance you can travel on the

remaining fuel based on the fuel

economy.

Trip Computer And Info

Switch

The distance-to-empty will be

calculated and displayed every second.

The following information can be

selected by pushing the INFO switch

with the ignition in the ON position:

If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ

from the amount indicated.

Distance-to-empty (approximate

distance you can travel on the available

fuel)

Average fuel economy

Current fuel economy

Average vehicle speed

Vehicle speed alarm — If Equipped

0502011019A019

If you have any problems with your trip

computer, contact an authorized dealer.

Distance To Empty Display Screen

80

Average Fuel Economy Mode

This mode displays the average fuel

economy by calculating the total fuel

consumption and the total traveled

distance since purchasing the vehicle,

reconnecting the battery after

disconnection, or resetting the data.

The average fuel economy is calculated

and displayed every minute. To clear

the data being displayed, push the

INFO switch for more than 1.5 seconds.

05020110199019

0502011020110C

Current Fuel Economy Display

Screen

Average Vehicle Speed Display

Screen

After pushing the INFO switch, “- - - mpg”

(“- - - L/100 km”) will be displayed for

about 1 minute before the fuel economy is

recalculated and displayed.

Average Vehicle Speed Mode

After pushing the INFO switch, “- - - MPH”

(“- - - km/h”) will be displayed for about

1 minute before the vehicle speed is

recalculated and displayed.

This mode displays the average vehicle

speed by calculating the distance and

the time traveled since connecting the

battery or resetting the data.

Current Fuel Economy Mode

This mode displays the current fuel

economy by calculating the amount of

fuel consumption and the distance

traveled. Current fuel economy will be

calculated and displayed every two

seconds.

Vehicle Speed Alarm Mode — If

Equipped

Average vehicle speed will be

calculated and displayed every

10 seconds. To clear the data being

displayed, push the INFO switch for

more than 1.5 seconds.

In this mode, the current setting for the

Vehicle Speed Alarm is displayed. You

can change the set vehicle speed that

will trigger the warning.

When you've slowed to about 3 MPH

(5 km/h) , “- - - mpg” (“- - - L/100 km”)

will be displayed.

Note: The vehicle speed alarm display

is activated at the same time the beep

sound is heard. The set vehicle speed

will flash several times. The vehicle

speed alarm can be set using the INFO

switch. The vehicle speed alarm

function can be set between 18 and

155 mph (30 and 250 km/h).

81

Getting To Know Your Instrument Panel -> Control Panel and Instruments for Your Fiat 124 Spider 2 Door Second Generation (2016-2020)

Related Topics

Getting To Know Your Instrument Panel

Popular Owner Manuals

Latest Owner Manuals