Advertisement

Advertisement

Getting To Know Your Instrument Panel -> Personalization Features for Your Fiat 124 Spider 2 Door Second Generation (2016-2020)

Note:  
To allow the passenger occupant  
Vehicles Without Advanced Keyless  
Function  
To allow the front passenger seat weight  
sensor to function properly, do not place  
and sit on an additional seat cushion on  
the front passenger seat. The sensor may  
not function properly because the  
additional seat cushion could cause  
sensor interference.  
If the key is taken out of the vehicle  
while the ignition is not switched OFF  
and all the doors are closed, a beep will  
be heard inside the vehicle 6 times and  
classification sensor to function  
properly, do not place and sit on an  
additional seat cushion on the  
passengers seat. The sensor may not  
function properly because the  
additional seat cushion could cause  
sensor interference.  
the KEY warning light (red)  
will turn  
When a small child sits on the front  
passenger seat, it is possible that the  
warning beep will not operate.  
on continuously in the instrument  
cluster to notify the driver that the  
ignition has not been switched OFF.  
If a small child is seated on the  
passengers seat, the warning beep  
may not operate.  
Note: Because the key fob uses  
low-intensity radio waves, the  
warning may activate if the key fob  
is carried together with a metal object  
or it is placed in a poor signal reception  
area.  
Ignition Not Switched OFF  
If the driver's door is opened while the  
ignition is placed in the ACC position, a  
continuous beep sound will be heard to  
notify the driver that the ignition has not  
been placed in the OFF position.  
Mexico  
If the vehicle speed exceeds about  
12 MPH (20 km/h) with the driver or  
passengers seat belt unfastened, a  
warning beep sounds continuously. If  
the seat belt remains unfastened, the  
beep sound stops once and then  
continues for about 90 seconds. The  
beep stops after the driver or  
Request Switch Inoperable Warning  
Beep — If Equipped With Advanced  
Keyless Function  
Left in this condition, the keyless entry  
system will not operate, the car cannot  
be locked, and the battery power will  
be depleted.  
If the request switch on the exterior  
door handle is pushed with a door  
open, or the ignition has not been  
placed in the OFF position, a beep will  
be heard for about two seconds to  
indicate that the doors, and trunk lid  
cannot be locked.  
Key Removed From Vehicle  
Warning Beep  
passengers seat belt is fastened.  
Until a seat belt is fastened or a given  
period of time has elapsed, the beep  
sound will not stop even if the vehicle  
speed falls below 12 MPH (20 km/h).  
Vehicles With Advanced Keyless  
Function  
If the key is taken out of the vehicle  
while the ignition is not switched OFF  
and all the doors are closed, the beep  
which sounds outside of the vehicle will  
be heard 6 times, and the beep which  
sounds inside the vehicle will be heard  
6 times, and the KEY warning light (red)  
will flash continuously in the  
Key Left-In-Trunk Compartment  
Warning Beep — If Equipped With  
Advanced Keyless Function  
Warning!  
If the key fob is left in the trunk with all  
doors locked and the trunk lid closed, a  
beep sound is heard for about ten  
seconds to remind the driver the key  
fob has been left in the trunk.  
Placing heavy items on the front passenger  
seat may cause the front passenger seat belt  
warning function to operate depending on the  
weight of the item.  
instrument cluster to notify the driver  
that the ignition has not been switched  
OFF.  
106  
If this happens, open the trunk lid by  
pushing the electric trunk lid opener  
and remove the key fob.  
Vehicle Speed Alarm — If Equipped  
Blind Spot Monitoring (BSM)  
System Warning Beep — If  
Equipped  
The vehicle speed alarm function is  
designed to alarm the driver via a single  
beep sound and a warning indication in  
the instrument cluster that the  
previously set vehicle speed has been  
exceeded.  
A key fob removed from the trunk may  
not function because its functions may  
have been temporarily suspended. To  
restore the key fob function, perform  
the applicable procedure (see  
Driving Forward: the warning beep  
operates when the direction indicator  
lever is operated to the side where the  
Blind Spot Monitoring (BSM) warning  
light is illuminated.  
You can change the vehicle speed  
setting at which the warning is triggered  
(see paragraph “Trip Computer” in  
“Getting To Know Your Vehicle”  
chapter).  
paragraph “Keys” in “Getting to know  
your vehicle” chapter).  
Note: A personalized function is  
available to change the Blind Spot  
Monitoring (BSM) warning beep sound  
volume.  
Key Left-In-Vehicle Warning Beep  
(with the advanced keyless function)  
Tire Inflation Pressure Warning  
Beep — If Equipped  
Reversing: if a moving object such as  
a vehicle or two-wheeled vehicle  
approaches on the left or right from  
behind your vehicle, the Blind Spot  
Monitoring (BSM) warning sound is  
activated.  
If a key fob is left in the vehicle and all  
the doors and the trunk are locked  
using a separate key fob, a beep sound  
is heard for about ten seconds to  
remind the driver that the key fob has  
been left in the vehicle.  
Vehicle With Conventional Tires: the  
warning beep sound will be heard for  
about three seconds when there is any  
abnormality in tire inflation pressures  
(see “TPMS” in “Safety” chapter).  
Electronic Steering Lock Warning  
Beep  
If this happens, open the door and  
remove the key fob. A key fob removed  
from the vehicle this way may not  
function because its functions may  
have been temporarily suspended.  
Vehicle With Run-Flat Tires (If  
Equipped): the warning beep sound will  
be heard for about three seconds if the  
tire pressures decrease. If the tire  
pressure decreases extremely, a beep  
sound will be heard for approximately  
30 seconds (see “TPMS” in “Safety”  
chapter).  
The warning beep operates if the  
steering wheel is not unlocked after the  
keyless ignition START/STOP button is  
pushed.  
Perform the applicable procedure to  
restore the functions of the key fob (see  
paragraph “Keys” in “Getting To Know  
Your Vehicle” chapter).  
Speed Limiter Warning Beep — If  
Equipped  
If the vehicle speed exceeds the set  
speed by about 2 MPH (3 km/h) or  
more, a warning beep operates  
continuously.  
The warning beep operates until the  
vehicle speed decreases to the set  
speed or less.  
107  
Settings change method  
D: Refer to “Key Fob” in “Getting To  
Know Your Vehicle” for further  
information.  
PERSONALIZATION  
FEATURES  
1. Settings can be changed by  
operating the center display screen  
Overview  
E: Refer to “Lock/Unlock With  
Request Switch (With The Advanced  
Keyless Function)” (Doors) in “Getting  
To Know Your Vehicle” for further  
information.  
A: Refer to the “Settings” paragraph  
in Fiat Connect 7.0 Supplement for  
further information.  
The following Personalization Features  
can be set or changed by the customer  
or by an authorized dealer.  
Personalization Features differ  
depending on the market and  
specification.  
B: Refer to “Fuel Economy Monitor”  
paragraph in this chapter.  
3. Settings can be changed by an  
authorized dealer (refer to the  
following table)  
2. Settings can be changed by  
operating the vehicle switches  
X: Refer to your authorized dealer for  
setting change.  
C: Refer to “Auto Lock/Unlock  
Function” paragraph in “Getting To  
Know Your Vehicle” for further  
information.  
Settings Change Method  
Item  
Safety  
Feature  
Factory Setting  
Available Settings  
1
2
3
Blind Spot  
Monitoring  
System (if  
equipped)  
Warning Beep Volume (*)  
High  
High/Low/Off  
A
X
108  
Settings Change Method  
2
Item  
Feature  
Factory Setting  
Available Settings  
1
3
Vehicle  
Lock: When  
Driving/Unlock: In  
Park/Lock: Out of  
Park Unlock: In  
Park/Lock: Shifting  
Out of Park/ Lock:  
When Driving Unlock:  
IGN Off/ Lock: When  
Driving/Off  
Lock: When  
Driving/Unlock: IGN  
Off  
Operation condition of  
auto lock/unlock function  
Door Locks  
A
C
X
Keyless  
Entry  
System  
90 seconds/  
60 seconds/30  
seconds  
Time for locking door  
automatically  
30 seconds  
30 seconds  
A
A
X
X
90 seconds/  
60 seconds/30  
seconds  
Time for locking door  
automatically  
Advanced  
Keyless  
Entry  
Auto-lock function  
operation/non operational  
Off  
On/Off  
A
A
X
X
System  
Beep volume when  
locking/unlocking  
Off or Medium  
High/Medium/Low/Off  
D/E  
60 seconds/  
30 seconds/15  
seconds/7.5 seconds  
Time until interior lights  
turn off after closing door  
15 seconds  
A
X
Illuminated  
Entry  
System  
Time until interior lights  
turn off automatically  
when any door is not  
closed completely  
60 minutes/  
30 minutes/10  
minutes  
30 minutes  
On  
A
A
X
X
Auto-Wiper  
Control  
Operational/non-  
operational  
On/Off (**)  
109