Get GETTING TO KNOW YOUR INSTRUMENT PANEL -> INSTRUMENT CLUSTER DISPLAY Guide for Fiat 500 C 2 Door Second Generation (2016-2020)

82 GETTING TO KNOW YOUR INSTRUMENT PANEL

The steering wheel mounted controls allow you to scroll

through and enter the main menus and submenus. You can

access the specific information you want and make selec-

tions and adjustments.

The system display consists of the following:

• System Status

• Vehicle Information Warning Message Displays

• Personal Settings (Customer Programmable Features)

• Outside Temperature Display

Instrument Cluster Display Control Buttons

The driver-interactive instrument cluster display is located

in the center of the instrument cluster.

• Trip Computer Functions

• Tire Pressure Monitoring Display

Instrument Cluster Display Control Buttons

Push and release the MENU button briefly to access the

instrument cluster display. Push and hold the MENU

button (approximately one second) to return to the main

screen.

Push and release the up arrow button to scroll upward

through the displayed menu and the related options or to

increase the displayed value.

Push and release the down arrow button to scroll down-

ward through the displayed menu and the related options

or to decrease the value displayed.

Instrument Cluster Display

GETTING TO KNOW YOUR INSTRUMENT PANEL 83

NOTE: Up and down arrow buttons activate different

functions according to the following situations:

• Audio Repetition — If Equipped

• Navigation Repetition — If Equipped

• To scroll the menu options upwards or downwards.

• To increase or decrease values during settings.

Selecting An Option Of The Main Menu Without Sub-

NOTE: When opening one of the front doors, the instru-

ment cluster display will turn on the clock and the miles or

kilometers covered (if equipped) for a few seconds.

1. Briefly push and release the MENU button to select the

main menu option to set.

2. Push and release the up or down arrow button (by

Instrument Cluster Display Setup Menu

single pushes) to select the new setting.

The menu comprises a series of functions arranged in a

cycle. Push and release the up and down arrow buttons to

access the different options and settings (setup).

3. Briefly push and release the MENU button to store the

new setting and go back to the main menu option

previously selected.

The setup menu can be activated by pushing the MENU

button. A single push on the up or down arrow button will

scroll through the setup menu options. The menu includes

the following functions:

Selecting An Option Of The Main Menu With Submenu

1. Briefly push and release the MENU button to display

the first submenu option.

2. Push and release the up or down arrow button (by

• Buzzer Volume

single pushes) to scroll through all the submenu options.

• Service — If Equipped

• Headlight Adjustment — If Equipped

• Trip B Data

3. Briefly push and release the MENU button to select the

displayed submenu option and to open the relevant

setup menu.

84 GETTING TO KNOW YOUR INSTRUMENT PANEL

4. Push and release the up or down arrow button (by

single pushes) to select the new setting for this submenu

option.

1. Place the ignition in the MAR (ACC/ON/RUN) posi-

tion. (Do not start the engine.)

2. Fully push the accelerator pedal slowly, three times

within 10 seconds.

5. Briefly push and release the MENU button to store the

new setting and go back to the previously selected

submenu option.

3. Turn the ignition switch to the OFF position.

NOTE: If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not

reset. If necessary, repeat this procedure.

6. Push and hold the MENU button to return to the main

menu (short hold) or the main screen (longer hold).

Oil Change Reset

TRIP COMPUTER

Your vehicle is equipped with an engine oil change indi-

cator system. The “Change Engine Oil” message will

appear in the instrument cluster display for approximately

5 seconds after a single chime has sounded to indicate the

next scheduled oil change interval. The engine oil change

indicator system is duty cycle based, which means the

engine oil change interval may fluctuate, dependent upon

your personal driving style.

The Trip Computer is located in the instrument cluster.

It displays trip information such as: trip information,

range, fuel consumption, average speed, and travel time.

Trip Button

The TRIP button, located on the right steering column

stalk, can be used to display and to reset the previously

described values.

Unless reset, this message will continue to display each

time the ignition is placed in the MAR (ACC/ON/RUN)

position. To turn off the message temporarily, push and

release the MENU button. To reset the oil change indicator

system (after performing the scheduled maintenance), refer

to the following procedure.

• A short button push displays the different values.

•

A long button push resets the system and starts a new trip.

GETTING TO KNOW YOUR INSTRUMENT PANEL -> INSTRUMENT CLUSTER DISPLAY for Your Fiat 500 C 2 Door Second Generation (2016-2020)

Related Topics

GETTING TO KNOW YOUR INSTRUMENT PANEL

Popular Owner Manuals

Latest Owner Manuals