Get Knowing Your Car -> Exterior Lights Guide for Fiat 500 C 2 Door Second Generation (2021-2025)

DOOR MIRRORS

EXTERIOR LIGHTS

15)

Manual adjustment

The door mirror can be adjusted from

outside by exerting a slight pressure on

the four sides of the glass.

Electric adjustment

F0S0035

Proceed as follows:

select the mirror using selector B fig.

17;

WARNING

F0S0210

adjust the mirror using the joystick A

fig. 17 in the four directions.

DAYTIME RUNNING

LIGHTS (DRL)

15) As door mirrors are curved, they may

slightly alter the perception of distance.

When driving the mirrors must always be in

position 1fig. 18.

16) 17)

For cars not provided with AUTO

function: With the key in MAR position

and the ring nut turned to O fig. 19

position, the daytime lights switch on

automatically; the other lights and

the internal lighting remain off.

For vehicles with the AUTO function:

the daytime running lights are turned on

automatically by the dusk sensor when

the ring is in the AUTO position.

F0S0020

Mirror folding

When required (for example when the

mirror causes difficulty in narrow

spaces) it is possible to fold the mirror

by moving it from position 1 (open),

to position 2 (closed) fig. 18.

DIPPED BEAM

HEADLIGHTS/SIDE

LIGHTS

FLASHING

"FOLLOW ME HOME"

DEVICE

To do this, pull the stalk towards the

steering wheel (unstable position)

fig. 19, regardless of the position of the

ring nut.

This function allows the space

surrounding the car to be lit up for the

set period of time.

With the ignition key turned to MAR,

turn the ring nut to

fig. 19. If dipped

headlights are activated, the daytime

running lights switch off and the side

lights and dipped headlights switch on.

PARKING LIGHTS

Activation

These lights can be turned on with the

starter switch in the STOP position

or with the key removed, by moving the

left stalk ring first to the O position (or

the AUTO position if the vehicle does

not have a dusk sensor) and then

The "Follow Me Home" device is

activated by pulling the stalk fig. 19

towards the steering wheel, in addition

to the stroke end click.

You can activate this function within 2

minutes of turning the engine off. This

function allows turning on lights and

low beams.

It is possible to set the headlights

turning on time by pulling the left lever

towards the steering wheel (unstable

position) one or more times. In this

case, you can choose between 0, 30,

60, 90 and up to a maximum of 210

seconds.

The

warning light switches on in

the instrument panel.

With the selector switch in the AUTO

position, the side lights and the dipped

beam headlights are controlled by

the dusk sensor.

to position

The warning light switches on in

MAIN BEAM HEADLIGHTS

the instrument panel. Repeat the same

operation to switch them off.

With the ring in the

position, push

the stalk forwards towards the

dashboard.

DIRECTION INDICATORS

The

warning light switches on in

Take the stalk fig. 19 to the (stable)

position:

the instrument panel.

For vehicles with the AUTO function:

with the ring in the AUTO position and

the dipped beam headlights on, push

the stalk forwards toward the

dashboard.

When the stalk is pulled towards the

steering wheel again, beyond the end

of travel position, the main beam

headlights deactivate, the dipped beam

headlights reactivate and the

warning light switches off.

upwards (position 1): to activate

the right direction indicator;

Each time the stalk is operated, the

downwards (position 2):

activation of left direction indicator.

warning light

on the instrument

panel switches on. The display shows a

message and the time set for the

"Lane Change" function

function. The

warning light comes

Move the lever upwards or downwards

(unstable position) for less than half a

second and the direction indicator

will flash 3 times to signal a lane

change, then immediately switch off

automatically.

on when the stalk is first operated

and stays on until the function is

automatically deactivated.

Deactivation

FOG LIGHTS/REAR FOG

LIGHTS

REAR FOG LIGHTS

With the dipped beam headlights on,

turn on the rear fog lights pressing

the button B fig. 21. The warning light

on the instrument panel will come

on.

The function is deactivated by turning

the headlights or the side lights on,

or by pulling the left lever towards the

steering wheel (unstable position)

for more than 2 seconds, or by turning

the ignition device to MAR.

(for versions/markets, where provided)

The fog lights can be activated only

when the dipped beam headlights are

on.

With the dipped beam headlights on,

use the button A fig. 21 to turn on

the front/rear fog lights, as follows:

Press the button again to switch the

lights off.

AUTO FUNCTION

(for versions/markets, where provided)

first press: turns on the fog lights,

warning light on the instrument

panel will turn on;

WARNING

the

Function activation

Turn the left stalk ring A fig. 20 to the

AUTO position.

IMPORTANT The function can only be

activated with the ignition device in

the MAR position.

16) The daytime running lights are an

alternative to the dipped beam headlights

for driving during the daytime in countries

where it is compulsory to have lights on

during the day, and they are also permitted

in those countries where this is not

obligatory.

second press: turns on the rear

fog lights, the

warning light on

the instrument panel will turn on;

third press: front/rear fog lights off.

Function deactivation

17) Daytime running lights cannot replace

dipped beam headlights when driving at

night or through tunnels. The use of

daytime running lights is governed by the

highway code of the country in which

you are driving. Comply with legal

requirements.

To deactivate the function, turn the left

stalk ring A to position

F0S0568

F0S0610

Knowing Your Car -> Exterior Lights for Your Fiat 500 C 2 Door Second Generation (2021-2025)

Related Topics

Knowing Your Car

Popular Owner Manuals

Latest Owner Manuals