HEADRESTS
WARNING
11)
FRONT
7) All adjustments must be made with the
car stationary and engine stopped.
Adjustment
8) If a side bag is fitted, it is dangerous to
use seat covers not available from
Lineaccessori MOPAR®.
Headrests can be adjusted in height.
Upward adjustment: raise the head
restraint until it clicks into place.
Downward adjustment: press button
A fig. 13 and lower the head restraint.
9) Once you have released the adjustment
lever, always check that the seat is locked
on the guides by trying to move it back and
forth. If the seat is not locked into place, it
may unexpectedly slide and cause the
driver to lose control of the car.
F0S0034
14
The particular shape of the head
restraint deliberately interferes with the
correct support of the rear passenger’s
back on the backrest in order to force
them to lift the head restraint for correct
use.
10) Make sure the backrests are properly
secured at both sides to prevent them from
moving forward, in the event of sharp
braking, with possible impact with of the
passengers.
IMPORTANT If the rear seats are used,
always set the head restraints in the
"completely raised" position.
WARNING
F0S0033
13
Removal
3) The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric in
a small area, could cause it to break,
thereby damaging the upholstery.
12)
To remove the rear head restraints,
simultaneously press buttons A fig. 14
and B at the sides of the two supports
and pull them upwards. The rear head
restraints must be lifted out with the
backrest released and tilted toward the
passenger compartment or with the
tailgate open.
REAR
(for versions/markets, where provided)
Adjustment
Upward adjustment (usage
condition): raise the head restraint until
it clicks into place.
4) Before tilting the backrest, remove any
objects on the seat cushion.
Downward adjustment:
simultaneously press the buttons A fig.
14 and B at the sides of the two
supports, and lower the head restraint.
15
English 
