Get Technical Specifications -> Drive Transmission Fluids And Lubricants Guide for Fiat 500 E 4 Door Second Generation (2020-2024)

206 TECHNICAL SPECIFICATIONS

After 25 miles (40 km), check the lug nut/bolt torque to

be sure that all the lug nuts/bolts are properly seated

against the wheel.

WARNING!

To avoid the risk of forcing the vehicle off the jack,

do not tighten the lug nuts/bolts fully until the vehicle

has been lowered. Failure to follow this warning may

result in personal injury.

Torque Patterns

FLUID CAPACITIES

Systems

U.S.

Metric

0.67 Liters

6.5 Liters

0.8 kg

EDM (Electronic Drive Module)

Cooling system

Hydraulic brake circuit

0.18 US gal

1.72 US gal

1.76 lb

Windshield and rear window washer fluid reservoir

0.40 US gal

1.5 Litres

DRIVE TRANSMISSION FLUIDS AND LUBRICANTS

Component

Fluid, Lubricant, or Genuine Part

We recommend using Mopar® Molybdenum disulphide grease, for use at high temperatures. N.L.G.I. consistency 1-2. Specifica-

tion: 9.55580-GRAS II.

Drive Transmission Greases

We recommend using Mopar® Low friction coefficient grease for constant velocity joints. N.L.G.I. consistency 0-1. Specification:

9.55580-GRAS II.

Drive Transmission Lubricant

Drive Transmission Coolant

We recommend using Mopar® SAE 75W-70, API GL-4. Specification: 9.55550-MZ14.

We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)

meeting the requirements of the manufacturer Material Standard MS.90032.

TECHNICAL SPECIFICATIONS 207

CAUTION!

● Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease

corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant

(antifreeze) or any “globally compatible” coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, the cooling

system will need to be drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as possible.

● Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with

the radiator engine coolant and may plug the radiator.

● This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not

recommended.

CHASSIS FLUIDS AND LUBRICANTS

Component

Fluid, Lubricant, Or Genuine Part

We recommend using Mopar® R1234yf.

Refrigerant

We recommend using Mopar® DOT 4, ISO 4925, Class 6, SAE J1704. DOT 4 brake

fluid must be changed every two years regardless of mileage.

Brake Master Cylinder

Windshield/Rear Window Washer Fluid

Use only Mopar® Mixture of alcohol, water and surfactants CUNA NC 956–II.

Technical Specifications -> Drive Transmission Fluids And Lubricants for Your Fiat 500 E 4 Door Second Generation (2020-2024)

Related Topics

Technical Specifications

Popular Owner Manuals

Latest Owner Manuals