206 TECHNICAL SPECIFICATIONS
After 25 miles (40 km), check the lug nut/bolt torque to
be sure that all the lug nuts/bolts are properly seated
against the wheel.
WARNING!
To avoid the risk of forcing the vehicle off the jack,
do not tighten the lug nuts/bolts fully until the vehicle
has been lowered. Failure to follow this warning may
result in personal injury.
Torque Patterns
FLUID CAPACITIES
Systems
U.S.
Metric
0.67 Liters
6.5 Liters
0.8 kg
EDM (Electronic Drive Module)
Cooling system
Hydraulic brake circuit
0.18 US gal
1.72 US gal
1.76 lb
Windshield and rear window washer fluid reservoir
0.40 US gal
1.5 Litres
DRIVE TRANSMISSION FLUIDS AND LUBRICANTS
Component
Fluid, Lubricant, or Genuine Part
We recommend using Mopar® Molybdenum disulphide grease, for use at high temperatures. N.L.G.I. consistency 1-2. Specifica-
tion: 9.55580-GRAS II.
Drive Transmission Greases
We recommend using Mopar® Low friction coefficient grease for constant velocity joints. N.L.G.I. consistency 0-1. Specification:
9.55580-GRAS II.
Drive Transmission Lubricant
Drive Transmission Coolant
We recommend using Mopar® SAE 75W-70, API GL-4. Specification: 9.55550-MZ14.
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
meeting the requirements of the manufacturer Material Standard MS.90032.
English 