262 SERVICING AND MAINTENANCE
Fluid And Filter Changes
Tire Markings
Under normal operating conditions, the fluid installed at
the factory will provide satisfactory lubrication for the life
of the vehicle.
Routine fluid and filter changes are not required. However,
change the fluid and filter if the fluid becomes contami-
nated (with water, etc.), or if the transmission is disas-
sembled for any reason.
RAISING THE VEHICLE
In the case where it is necessary to raise the vehicle, go to
an authorized dealer or service station.
TIRES
Tire Markings
Tire Safety Information
1 — U.S. DOT Safety
4 — Maximum Load
Tire safety information will cover aspects of the following
information: Tire Markings, Tire Identification Numbers,
Tire Terminology and Definitions, Tire Pressures, and Tire
Loading.
Standards Code (TIN)
2 — Size Designation
3 — Service Description
5 — Maximum Pressure
6 — Treadwear, Traction
and Temperature Grades
English 