Get IN AN EMERGENCY -> FIX&GO AUTOMATIC KIT Guide for Fiat 500 X 4 Door First Generation (2014-2024)

138) The vehicle's driving characteristics

will be modified with the space-saver wheel

fitted. Avoid violent acceleration and

braking, abrupt steering and fast cornering.

The overall duration of the space-saver

wheel is about 3000 km, after which the

relevant tyre must be replaced with another

one of the same type. Never install a

standard tyre on a rim that is designed for

use with a space-saver wheel. Have the

wheel repaired and refitted as soon as

possible. Using two or more space-saver

wheels at the same time is forbidden.

Do not grease the threads of the stud bolts

before fitting them: they might slip out

when driving!

140) The jack is a tool developed and

designed only for changing a wheel, if a

tyre gets punctured or damaged, on the

vehicle with which it is supplied or on other

vehicles of the same model. It must not

be used, for example, to jack other vehicle

models or objects. Never use the jack to

carry out maintenance or repairs under the

vehicle. Never position yourself under a

jacked vehicle. Should it be necessary to

work under the vehicle, contact a Fiat

Dealership. Incorrectly positioning the jack

may cause the vehicle to fall: use it only

in the positions indicated. Do not use the

jack for loads higher than the one shown

on its label.

FIX&GO AUTOMATIC

KIT

(where provided)

DESCRIPTION

143) 144) 145) 146) 147) 148) 149) 150)

55)

The Fix&Go automatic kit fig. 132 is

located in the boot, inside a dedicated

container. The container is also

equipped with a screwdriver, the tow

hook and the refuelling adaptor.

To access the Fix&Go automatic kit,

open the tailgate, position the

reconfigurable load platform in an

inclined position and lift the carpet. For

more detailed information, refer to

previous paragraph "Changing a

wheel".

139) The space-saver wheel is specific to

your vehicle: do not use it on other models,

or use the space-saver wheel of other

models on your vehicle. The space-saver

wheel must only be used in the event of an

emergency. It must only be used for the

distance necessary to reach a service point

and the vehicle speed must not exceed

80 km/h. The space-saver wheel has

an orange label that summarises the main

cautions for use and limitations. Never

remove or cover the sticker.

141) The space-saver wheel cannot be

fitted with snow chains. If a front (drive) tyre

is punctured and chains are needed, use

a standard wheel from the rear axle and

install the space-saver wheel on the rear

axle. In this way, with two normal drive

wheels at the front axle, it is possible to use

snow chains (this instruction is also valid

for 4x4 versions).

142) Never tamper with the inflation valve.

Never introduce tools of any kind between

the rim and the tyre. Check tyre and

space-saver wheel pressures regularly,

complying with the values given in the

"Technical specifications" chapter.

The Fix&Go automatic kit also includes:

❒ bottle A containing sealant and

fitted with: filling tube B and adhesive

label C with the wording “Max.

80 km/h” to be placed in a clearly

visible position (e.g. on the dashboard)

after repairing the tyre;

❒ a compressor D complete with

pressure gauge and connectors;

146

❒ if after this operation you still cannot

reach at least 1.8 bar after 5 minutes

from switching on the compressor,

do not resume driving but contact a

Fiat Dealership;

❒ after having driven for about 10

minutes, stop and re-check the tyre

pressure; remember to engage the

electric parking brake;

F1B0227C

F1B0229C

❒ if a pressure value of at least 1.8 bar

is detected, restore the correct

132

133

❒ an instruction leaflet, to refer to for

prompt and correct use and that must

be then given to the personnel dealing

with the tyre treated with sealant;

❒ make sure that the switch for the

compressor is in position 0 (off), start

the engine, insert the plug into the

power socket located on the central

tunnel and switch on the compressor

by bringing the switch to position I (on);

pressure (with engine running and

electric parking brake engaged),

resume driving immediately and drive

with great care to a Fiat Dealership.

❒ a pair of gloves located in the side

compartment of the compressor;

❒ inflate the tyre to the pressure

indicated in the “Wheels” paragraph

(see “Technical data” chapter). In order

to obtain a more precise reading, check

the pressure value on pressure gauge

B with the compressor off;

WARNING

❒ some adaptors, for inflating different

elements.

143) Punctures on the sides of the tyre

may not be repaired. Do not use the

Fix&Go automatic kit if the tyre is damaged

due to travelling when flat.

IMPORTANT The sealing fluid is

effective with external temperatures of

between –20°C and +50°C. The sealing

fluid has an expiry date.

144) Wear the protective gloves provided

with the Fix&Go automatic kit.

❒ if after five minutes pressure is not at

least 1.8 bar, disengage the

INFLATION PROCEDURE

145) Apply the adhesive label where it can

be easily seen by the driver as a reminder

that the tyre has been treated with the

Fix&Go automatic kit. Drive carefully,

particularly on bends. Do not exceed 80

km/h. Do not accelerate or brake suddenly.

compressor from the valve and power

socket, then move the vehicle forwards

by approx. ten metres in order to

distribute the sealing fluid inside the tyre

evenly, then repeat the inflation

operation;

Proceed as follows:

❒ engage the electric parking brake,

unscrew the tyre valve cap, take out

filler hose A fig. 133 and tighten ring nut

B on the tyre valve;

146) If the pressure has fallen below 1.8

bar, do not drive any further: the Fix&Go

automatic kit cannot guarantee proper hold

because the tyre is too damaged. Contact

a Fiat Dealership.

147

147) You must always indicate that the tyre

was repaired using the Fix&Go automatic

kit. Give the leaflet to the technicians who

will be handling the tyre that was treated

using the Fix&Go automatic kit.

EMERGENCY

STARTING

WARNING

55) In the event of a puncture caused by

foreign bodies, the kit may be used to

repair tyres showing damage on the tread

or shoulder up to max. 4 mm diameter.

56)

148) Repair is not possible if the wheel rim

is damaged (tread is deformed, causing

air to escape). Do not remove foreign

bodies (screws or nails) from the tyre.

If the battery is flat, a jump starting can

be performed using the battery and

the cables of another vehicle, or using

an auxiliary battery. In all cases, the

battery used must have a capacity

equal to or a little higher than the flat

one.

149) Do not operate the compressor for

longer than 20 minutes consecutively. Risk

of overheating. The Fix&Go automatic kit

is not suitable for definitive repairs, so

the repaired tyres may only be used

temporarily.

WARNING

3) Dispose of the bottle and the sealant

properly. Dispose of the components

in compliance with national and local

regulations.

IMPORTANT

150) The bottle contains ethylene glycol

and latex: it may cause an allergic reaction.

It is harmful if swallowed. It is irritant for

the eyes. It may cause sensitisation if

inhaled or on contact. Avoid contact with

eyes, skin and clothes. In the case of

contact, wash immediately with plenty of

water. In the event that it is swallowed, do

not induce vomiting. Rinse out your mouth,

drink large quantities of water and seek

immediate medical attention. Keep out of

the reach of children. The product must

not be used by asthmatics. Do not inhale

the vapours during insertion and suction.

Call a doctor immediately if allergic

Do not use an auxiliary battery or any

other source of external supply with

a voltage above 12 V: the battery, the

starter, the alternator and the electrical

system of the vehicle could be

damaged.

Do not attempt jump starting if the

battery is frozen. The battery could

break and explode!

JUMP STARTING

The vehicle battery is located in the

engine compartment, behind the left

light cluster.

reactions are noted. Store the bottle in its

proper compartment, away from sources

of heat. The sealant has an expiry date.

Replace the cylinder containing the sealant

after the expiry date.

151) 152) 153) 154)

IMPORTANT The positive terminal (+) of

the battery is shielded by a protective

element. Raise it to access the terminal.

148

IN AN EMERGENCY -> FIX&GO AUTOMATIC KIT for Your Fiat 500 X 4 Door First Generation (2014-2024)

Related Topics

IN AN EMERGENCY

Popular Owner Manuals

Latest Owner Manuals