An incorrectly posi-
tioned jack may cause the
WITH A SHOP JACK
From the front
JACKING
THE VEHICLE
vehicle to fall. Do not use
the jack to lift loads exceeding
that indicated on the label at-
tached to the jack itself.
Jack up the vehicle only by position-
ing the jack arm at the gearbox/differ-
ential and placing a rubber pad in be-
tween, as shown in fig. 43.
WITH THE JACK
See “If a tyre is punctured”, in this
section.
The jack should only be
used to change a wheel
on the vehicle for which it
Please note:
– The jack requires no adjustments.
was designed. It should not be put
to other uses or employed to
raise other models. Under no cir-
cumstances should it be used
when carrying out repairs under
the vehicle.
– The jack cannot be repaired. If it
breaks it must be replaced with a new
jack;
– No other tool, part from the han-
dle shown in this chapter, can be fit-
ted to the jack.
fig. 43
IN AN EMERGENCY
145
English 