Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

STARTING AND DRIVING -> STARTING THE ENGINE for Your Fiat Doblo Van 2010-2022

PROCEDURE FOR  
PETROL VERSIONS  
PROCEDURE FOR DIESEL  
VERSIONS  
STARTING THE  
ENGINE  
Proceed as follows:  
Proceed as follows:  
The vehicle is fitted with an immobiliser:  
if the engine fails to start, see the  
paragraph on “The Fiat CODE system”  
in the “Dashboard and controls”  
section.  
engage the handbrake;  
put the gear lever into neutral;  
engage the handbrake;  
put the gear lever into neutral;  
turn the ignition key to MAR: the  
fully depress the clutch pedal,  
without touching the accelerator;  
warning lights  
and  
on the  
instrument panel will turn on;  
wait for the warning lights  
The engine may be noisier during the  
first few seconds of operation,  
turn the ignition key to AVV and  
release it as soon as the engine starts.  
If the engine does not start at the  
first attempt, return the ignition key to  
STOP before repeating the starting  
procedure.  
and  
especially after a long period of  
inactivity. This is due to the hydraulic  
tappets, the timing system chosen for  
petrol engine versions to reduce the  
number of servicing interventions, and  
affects neither functionality nor reliability.  
to switch off. The hotter the engine  
is, the quicker this will happen;  
fully depress the clutch pedal,  
without touching the accelerator;  
If, when the ignition key is on MAR, the  
instrument panel warning light  
remains on together with warning  
turn the ignition key to AVV as soon  
switches off.  
as warning light  
17) 18)  
95)  
Waiting too long will waste the heating  
work carried out by the glow plugs.  
Release the key as soon as the engine  
starts.  
light  
, turn the key to STOP and  
then back to MAR; if the warning light  
remains on, try the other keys provided  
with the vehicle. If you are still unable  
to start the engine, perform the  
emergency starting procedure (see  
"Emergency starting" in the "In an  
emergency" chapter) and contact a Fiat  
Dealership.  
IMPORTANT With the engine cold, the  
accelerator pedal must be fully released  
when you turn the ignition key to AVV.  
If the engine does not start at the  
first attempt, return the ignition key to  
STOP before repeating the starting  
procedure.  
If, when the ignition key is at MAR the  
warning light remains lit, turn the  
key to STOP and then back to MAR; if  
the warning light remains lit, try with the  
other keys provided with the vehicle. If  
you still cannot start the engine, contact  
a Fiat Dealership.  
124  
19)  
HANDBRAKE  
WARMING UP THE  
ENGINE JUST AFTER IT  
HAS STARTED  
WARNING  
The handbrake lever is located between  
the front seats. Pull the lever upwards  
to engage the handbrake and ensure  
that the vehicle does not move. The  
vehicle should be secured after several  
clicks of the lever. If it is not, contact  
a Fiat Dealership to have it adjusted.  
17) It is advisable not to demand maximum  
performance from your vehicle (e.g.  
excessive acceleration, long distances at  
high speeds, excessively intense braking,  
etc.) during the initial period of use.  
Proceed as follows:  
drive off slowly, letting the engine  
turn at medium revs. Do not accelerate  
abruptly;  
18) When the engine is off, do not leave  
the key turned to MAR to prevent  
unnecessary electrical consumption from  
draining the battery.  
do not demand full performance at  
first. Wait until the engine coolant  
temperature gauge starts moving.  
96)  
When the handbrake lever is engaged  
and the ignition key is in MAR position,  
the instrument panel warning light  
will switch on.  
19) If the indicator flashes for 60  
seconds after starting or during an  
extended towing period, this indicates  
a problem in the glow plug pre-heating  
system. Use the vehicle normally if the  
engine starts, but contact a Fiat Dealership  
as soon as possible.  
EMERGENCY STARTING  
If the instrument panel warning light  
stays on steadily, you can perform  
an emergency starting by using the  
code on the CODE card (see the “In an  
emergency” section).  
Proceed as follows to release the  
handbrake:  
slightly lift the lever and press  
release button A fig. 140;  
20) Never start the engine by pushing,  
towing or driving downhill. This could  
cause fuel to flow into the catalytic  
converter and damage it beyond repair.  
keep button A pressed and lower  
the lever. The  
20)  
warning light in the  
STOPPING THE ENGINE  
instrument panel will switch off.  
Press the brake pedal when carrying  
out this operation to prevent the vehicle  
from moving accidentally.  
Turn the ignition key to STOP while the  
engine is idling.  
WARNING  
IMPORTANT After a taxing drive, you  
should allow the engine to “catch  
its breath” before turning it off by letting  
it idle to allow the temperature in the  
engine compartment to fall.  
PARKING  
95) It is dangerous to run the engine in  
enclosed areas. The engine takes in  
oxygen and releases carbon dioxide,  
carbon monoxide and other toxic gases.  
Proceed as follows:  
stop the engine and engage the  
handbrake;  
engage the gear (on a slope, engage  
first gear if the vehicle is facing uphill  
or reverse if it is facing downhill) and  
leave the wheels steered.  
125