Get IN AN EMERGENCY -> If an Exterior Light Burns Out Guide for Fiat Fiorino SUV Second Generation (1988-2014)

IF AN EXTERIOR

LIGHT BURNS OUT

For the type of bulb and power rating, see

“When needing to change a bulb”.

FRONT LIGHT CLUSTERS fig. 22

The front light clusters contain sidelight,

dipped beam, main beam and direction in-

dicator bulbs.

fig. 22

fig. 23

The bulbs are arranged inside the light

cluster as follows:

SIDE/TAILLIGHTS

❒ remove the bulb B and replace it;

To change the bulb, proceed as follows: ❒ install the new bulb: fit the bulb back

A side/taillights and main/low beam lights;

B direction indicators.

in position A-fig. 23 and put the pro-

tection lid A-fig. 22 back.

❒ remove the protection lid A-fig. 22;

❒ turn the bulb holder anticlockwise A-

fig. 23 and pull it out;

133

DIPPED BEAM HEADLIGHTS/

MAIN BEAM HEADLIGHTS

To change the bulb (double filament), pro-

ceed as follows:

❒ remove the protection lid A-fig. 22;

❒ release the bulb stop clip as shown by

the arrows fig. 22;

❒ remove the bulb A-fig. 24 from con-

nector B and replace it;

fig. 24

fig. 25

❒ fit the new bulb on the connector B. DIRECTION INDICATORS

Then, make sure that the profile of the

Front indicators

metal part matches the grooves on the

headlight bulb support;

To change the bulb, proceed as follows:

❒ close the bulb stop clip and reinstall the

protection lid A-fig. 22;

❒ turn the protection lid B-fig. 22 anti-

clockwise;

❒ remove the bulb A-fig. 25 and replace

it;

❒ reinstall the protection lid B.

134

FOG LIGHTS (where provided)

IMPORTANT To replace the front fog

lights you must contact the Fiat Dealership.

fig. 26

fig. 27

Side indicators

❒ refit the bulb holder C in the lens by

turning it clockwise;

To change the bulb, proceed as follows:

❒ refit the unit making sure the catch

clicks into place B.

❒ push the lens A-fig. 26 to compress

the internal catch B-fig. 27. Then, pull

the unit outwards;

❒ turn the bulb holder C anticlockwise,

remove the snap-fitted bulb D and re-

place it;

135

REAR LIGHT CLUSTERS

Rear light clusters contain the bulbs of the

taillights, direction indicators, reverse/rear

fog lights and stop light.

Access to the light clusters is gained as fol-

lows:

❒ open the rear swing-doors;

❒ remove the screws A-fig. 28 to access

the light cluster B-fig. 29;

❒ slide the connector out C-fig. 29.

The bulbs are arranged inside the light

cluster fig. 30 and fig. 31 as follows:

A stop lights;

B direction indicators;

C reverse lights;

fig. 28

fig. 30

D taillights / rear fog lights.

Access to these lights is gained by pulling

the 5 fins E-fig. 30 outwards.

fig. 29

fig. 31

136

fig. 32

fig. 33

fig. 34

3^rdSTOP LIGHTS fig. 32

PLATE LIGHTS

rd

To replace the 3 stop lights you must To replace the bulbs A-fig. 33 proceed as

contact the Fiat Dealership.

follows:

❒ pull the tongues indicated by the arrows

and remove the bulb holders;

❒ turn the bulb holder B-fig. 34 clock-

wise and take the bulb C out.

137

IN AN EMERGENCY -> If an Exterior Light Burns Out for Your Fiat Fiorino SUV Second Generation (1988-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals