fig. 38
fig. 39
fig. 40
fig. 41
fig. 42
Ceiling light with spot lights
(where provided)
REAR CEILING LIGHT
To change the bulb, proceed as follows:
To replace the bulbs proceed as follows:
❒ remove the ceiling light A-fig. 40 lev-
ering in the points shown by the ar-
rows;
❒ work in the points shown by the ar-
rows and remove light A-fig. 38;
❒ open the lid B-fig. 41 as indicated;
❒ open the protection door B-fig. 39;
❒ replace bulb C-fig. 42 releasing it from
the side contacts. Then, insert the new
bulb making sure it is correctly clamped
between the contacts;
❒ replace bulbs C after releasing them
from the side contacts; make sure that
new bulbs are correctly clamped be-
tween contacts;
❒ close the lid B-fig. 41 and secure the
ceiling light in its housing locking it
properly.
❒ close the door B-fig. 39 and secure the
ceiling light A-fig. 38 in its housing lock-
ing it properly.
139
English 
