2003-2012 Fiat Panda SUV SAFETY -> OCCUPANT PROTECTION SYSTEMS User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

SAFETY -> OCCUPANT PROTECTION SYSTEMS for Your Fiat Panda SUV Second Generation (2003-2012)

34) Do not tamper nor operate on the laser  
sensor. Do not close the openings in the  
aesthetic cover located under the interior  
rear view mirror. In the event of a sensor  
failure, contact a Fiat Dealership.  
OCCUPANT  
PROTECTION  
SYSTEMS  
SEAT BELTS  
USING THE SEAT BELTS  
All vehicle seats are equipped with seat  
belts with three anchor points and a  
retractor. The retractor mechanism  
operates locking the belt in the event of  
sharp braking or strong deceleration  
due to an impact. This allows the belt  
strap to slide freely and to adapt to the  
body of the occupant. In the event of  
an accident, the belt will lock reducing  
the risk of impact inside the passenger  
compartment and of being projected  
outside the vehicle.  
The most important safety equipment  
of the vehicle comprises the following  
protection systems:  
35) Do not cover the operating range of the  
sensor with stickers or other objects. Also  
pay attention to other objects on the  
bonnet (e.g. a layer of snow) and make  
sure they do not interfere with the light  
emitted by the laser.  
seat belts;  
SBR (Seat Belt Reminder) system;  
head restraints;  
36) If a trailer or a vehicle is towed the  
system must be deactivated with the  
display Setup Menu.  
child restraint systems;  
front airbags and side bags.  
Read the information given the  
following pages with the utmost care. It  
is of fundamental importance that the  
protection systems are used in the  
correct way to guarantee the maximum  
possible safety level for the driver and  
the passengers.  
The driver is responsible for respecting,  
and ensuring that all the other  
occupants of the vehicle also respect,  
the local laws in force in relation to  
the use of the seat belts.  
For the description of the headrest  
adjustment see the "Headrests"  
paragraph in the "Knowing your  
vehicle" chapter.  
Always fasten the seat belts before  
setting off.  
The belt should be worn keeping the  
torso straight and rested against the  
backrest.  
To fasten the seat belts, hold tongue A  
fig. 55 and insert it into buckle B, until  
it clicks into place. On removal, if the  
belt jams, let it rewind for a short  
stretch, then pull it out again without  
jerking.  
69  

Related Topics

Popular Owner Manuals