2003-2012 Fiat Panda SUV SAFETY -> SEAT BELTS User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

SAFETY -> SEAT BELTS for Your Fiat Panda SUV Second Generation (2003-2012)

34) Do not tamper nor operate on the laser  
sensor. Do not close the openings in the  
aesthetic cover located under the interior  
rear view mirror. In the event of a sensor  
failure, contact a Fiat Dealership.  
OCCUPANT  
PROTECTION  
SYSTEMS  
SEAT BELTS  
USING THE SEAT BELTS  
All vehicle seats are equipped with seat  
belts with three anchor points and a  
retractor. The retractor mechanism  
operates locking the belt in the event of  
sharp braking or strong deceleration  
due to an impact. This allows the belt  
strap to slide freely and to adapt to the  
body of the occupant. In the event of  
an accident, the belt will lock reducing  
the risk of impact inside the passenger  
compartment and of being projected  
outside the vehicle.  
The most important safety equipment  
of the vehicle comprises the following  
protection systems:  
35) Do not cover the operating range of the  
sensor with stickers or other objects. Also  
pay attention to other objects on the  
bonnet (e.g. a layer of snow) and make  
sure they do not interfere with the light  
emitted by the laser.  
seat belts;  
SBR (Seat Belt Reminder) system;  
head restraints;  
36) If a trailer or a vehicle is towed the  
system must be deactivated with the  
display Setup Menu.  
child restraint systems;  
front airbags and side bags.  
Read the information given the  
following pages with the utmost care. It  
is of fundamental importance that the  
protection systems are used in the  
correct way to guarantee the maximum  
possible safety level for the driver and  
the passengers.  
The driver is responsible for respecting,  
and ensuring that all the other  
occupants of the vehicle also respect,  
the local laws in force in relation to  
the use of the seat belts.  
For the description of the headrest  
adjustment see the "Headrests"  
paragraph in the "Knowing your  
vehicle" chapter.  
Always fasten the seat belts before  
setting off.  
The belt should be worn keeping the  
torso straight and rested against the  
backrest.  
To fasten the seat belts, hold tongue A  
fig. 55 and insert it into buckle B, until  
it clicks into place. On removal, if the  
belt jams, let it rewind for a short  
stretch, then pull it out again without  
jerking.  
69  
To unfasten the seat belts, press button  
C. Guide the seat belt with your hand  
while it is rewinding, to prevent it from  
twisting. Through the retractor, the  
belt automatically adapts to the body of  
the passenger wearing it, allowing  
freedom of movement.  
ADJUSTING THE SEAT  
BELT HEIGHT  
(for versions/markets, where provided)  
82) 83)  
Four different adjustments in height are  
provided. To adjust, press button A  
fig. 58 and raise or lower handle B.  
Always adjust the height of the seat belt  
to fit the person wearing it: this  
78)  
precaution could greatly reduce the risk  
of injury in the case of collision.  
The retractor may lock when the vehicle  
is parked on a steep slope: this is  
perfectly normal. Furthermore, the  
retractor mechanism locks the belt if it  
is pulled sharply or in the event of  
sudden braking, collisions and  
high-speed bends.  
F1D0051  
56  
Correct adjustment is obtained when  
the belt passes approximately half way  
between the shoulder and the neck.  
F1D0052  
57  
IMPORTANT When putting the back  
seat to its normal position, make sure  
the seat belts are positioned so they are  
ready to use.  
F1D0053  
58  
For some versions, front seat belts have  
just one fixed anchor point located on  
the door pillar.  
F1D0050  
55  
The rear seat is fitted with inertia seat  
belts with three anchor points and a  
retractor. Wear the rear seat belts  
as shown in fig. 56 (4-seater versions)  
or fig. 57 (5-seater versions).  
79) 80) 81)  
70  

Related Topics

Popular Owner Manuals