THIRD BRAKE LIGHTS
Insert the new bulb and make sure
that it is correctly clamped between the
contacts, then refit the lens A fig. 111.
These are located in the tailgate and
are LED lights. For replacement,
contact a Fiat Dealership.
WARNING
NUMBER PLATE LIGHTS
To replace the bulbs, proceed as
follows:
133) Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
remove lens A fig. 110;
F1D0087
108
release the clip C fig. 109 and
disconnect the electrical connector D;
134) Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
135) Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS.
WARNING
F1D0089
110
replace the bulb A fig. 111, releasing
it from the side contacts;
50) Halogen bulbs must be handled
holding the metal part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb
dry.
F1D0088
109
turn the bulb holder E and remove it,
extract the bulb and replace it;
refit the new lamp and carry out the
procedure described previously in
reverse.
51) Where possible, it is advisable to have
bulbs changed at a Fiat Dealership. The
correct operation and direction of the
external lights are absolutely essential for
the safety of the car and of compliance
with the law.
F1D0090
111
111
English 
