IMPORTANT Following an accident of a
certain importance, it is recommended
to replace both the child restraint
system and the seat belt to which it
was bound.
Group
Weight groups
9 - 18 kg
Group 1
Group 2
Group 3
15 - 25 kg
22 - 36 kg
Group 0 and 0+
All restraint devices must bear the
certification data, together with the
control mark, on a label solidly fixed to
the child restraint system which must
never be removed.
Lineaccessori MOPAR® includes child
restraint systems for each weight
group. These devices are
Babies up to 13 kg must be carried
with a rear facing child restraint system
of a type as shown in fig. 67 which,
supporting the head, does not induce
stress on the neck in the event of
sudden decelerations.
F1D0056
68
Group 2
Children from 15 to 25 kg may use the
vehicle seat belts directly fig. 69.
In this case, the child restraint system is
used to position the child correctly
with respect to the seat belts so that
the diagonal belt section crosses the
child’s chest and not the neck, and the
lower part is snug on the pelvis not
the abdomen.
The child restraint system is secured by
the vehicle seat belts, as shown in fig.
67 and it must restrain the child in
turn with its own belts.
recommended having been specifically
designed for Fiat vehicles.
FITTING A CHILD
RESTRAINT SYSTEM
WITH SEAT BELTS
92) 93) 94)
The Universal child restraint systems
installed with the seat belts only are
type-approved on the basis of the ECE
R44 standard and are divided into
various weight groups.
IMPORTANT The figures are indicative
and provided for assembly purposes
only. Fit the child restraint system
according to the instructions, which
must be included.
F1D0055
67
Group 1
Children weighing from 9 to 18 kg may
be transported in forward facing child
restraint systems fig. 68.
F1D0057
69
74
English 
