HAZARD WARNING
LIGHTS
REPLACING A BULB
CONTROL
123) 124)
40)
Press button A (fig. 77) to turn on/off
the lights, whatever the position of the
ignition key. When the hazard warning
GENERAL
INSTRUCTIONS
before changing a bulb check the
contacts for oxidation;
lights are on, the
lights flash.
and warning
burnt bulbs must be replaced by
others of the same type and power;
after replacing a headlight bulb,
always check its alignment;
when a light is not working, check
that the corresponding fuse is intact
before replacing a bulb. For the location
of fuses, refer to the paragraph
"Replacing fuses" in this chapter.
F1E0932
77
Note A slight misting may appear on
the internal surface of the headlight: this
does not indicate a fault and is caused
by low temperature and the degree
of humidity in the air. Misting will rapidly
disappear when the headlights are
switched on. The presence of drops
inside the headlights indicates
Emergency braking
In the event of emergency braking the
hazard warning lights switch on
automatically as well as warning lights
and in the instrument panel.
The lights switch off automatically when
emergency braking ceases.
infiltration of water. Contact a Fiat
Dealership.
91
English 
