Get STARTING AND DRIVING -> CRUISE CONTROL (CONSTANT SPEED REGULATOR) Guide for Fiat Punto SUV 2011-2018

CRUISE CONTROL

(constant speed

regulator)

WARNING

(for versions/markets, where provided)

36) If climate comfort is to be favoured, the

Stop/Start system can be disabled, for a

continuous operation of the climate control

system.

115) 116)

This is an electronically controlled

driving assistance device that allows

the desired vehicle speed to be

maintained, without having to press the

accelerator pedal.

F1E0633

MEMORISING /

RESTORING THE

MEMORISED SPEED

The device can be used at a speed

above 30 km/h on long stretches of dry,

straight roads with few variations (e.g.

motorways). It is therefore not

recommended to use this device on

extra-urban roads with traffic. Do not

use it in town

Speed memorising: turn ring nut A to

ON and press the accelerator pedal

so that the vehicle reaches the desired

speed. Move the stalk upwards (+)

for at least one second, then release it:

the speed is memorised and you can

therefore release the accelerator pedal.

If needed (when overtaking for

ACTIVATING THE DEVICE

Turn ring nut A fig. 72 to the ON

position. The device cannot be

activated in 1st or reverse gear: it is

advisable to activate the function in

4th gear or higher.

instance), you can accelerate simply by

pressing the accelerator; when you

release the pedal, the vehicle goes

back to the speed stored previously.

Travelling downhill with the device

engaged, the vehicle speed may

increase more than the memorised one.

Restoring the memorised speed:

accelerate gradually until reaching

a speed approaching the memorised

speed, engage the gear selected at the

time of speed memorising and finally

press the B (RES) button fig. 72.

DEACTIVATING THE

DEVICE

PARKING SENSORS

(for versions/markets, where provided)

The device can be deactivated by

turning the ring nut A to OFF, by

switching off the engine or by pressing

the brake, the clutch or the accelerator

pedal; in this last case the system is

not completely deactivated but gives

priority to the acceleration request. The

device still remains active, without the

need to press the B (RES) button fig. 72

to return to the previous conditions

once acceleration is concluded.

Automatic deactivation: the device

deactivates automatically in the

following cases: activation of the ABS

or ESP system, vehicle speed below

the predefined limit, Cruise Control

failure.

117)

37)

SENSORS

INCREASING/

DECREASING

MEMORISED SPEED

The sensors are located in the rear

bumper fig. 73, they detect the

presence of any obstacles near the rear

part of the vehicle and inform the

driver, through an intermittent acoustic

signal.

Speed increase: press the accelerator

and memorise the new speed or move

the stalk upwards (+), until reaching

the new speed, which will be

memorised automatically.

Speed decrease: deactivate the

device and memorise the new speed or

move the stalk downwards (-), until

reaching the new speed, which will be

memorised automatically.

Each movement of the stalk

corresponds to an increase/decrease in

speed of about 1 km/h, while keeping

the stalk held upwards will continuously

increase the speed.

WARNING

F1E0624

115) While travelling with the device

engaged, do not put the gear lever into

neutral.

Activation/deactivation: the sensors

are automatically activated when

reverse gear is engaged. As the

obstacle behind the vehicle gets closer,

the acoustic signal becomes more

frequent.

116) In the case of malfunctioning or if the

device fails, turn ring nut to OFF and

contact a Fiat Dealership.

Download User Manual App

STARTING AND DRIVING -> CRUISE CONTROL (CONSTANT SPEED REGULATOR) for Your Fiat Punto SUV 2011-2018

Related Topics

STARTING AND DRIVING

Popular Owner Manuals

Latest Owner Manuals