REFUELLING
PROCEDURE
LPG versions
REFUELLING THE
VEHICLE
To access filler A fig. 75 open access
flap B and undo cap C. Before
refuelling turn the engine off, engage
the handbrake, turn the ignition key to
STOP and hand over the suitable
filling adaptor to the LPG refuelling
operators; don't smoke during
refuelling.
38)
To refuel proceed as follows:
120) 121) 122)
open the flap A fig. 74, pulling it
outwards, then undo cap B fig. 74
(using the ignition key, for versions
where provided), secure it to the flap
using the loss prevention strap C, insert
the dispenser into the filler and refuel;
Always stop the engine before
refuelling.
PETROL ENGINES
Use unleaded petrol only, with an
octane number (R.O.N.) no lower than
95. Never introduce even the smallest
amount of leaded petrol, even in the
event of an emergency, in order to
prevent damage to the catalytic
converter.
after refuelling, before removing
the dispenser, wait for at least 10
seconds in order for the fuel to flow
inside the tank. Then remove the
dispenser from the filler and close flap A
fig. 74.
DIESEL ENGINES
Only use Diesel for motor vehicles (EN
590 specification). When using or
parking the vehicle for a long time in the
mountains or cold areas, it is advisable
to refuel using locally available diesel.
In this case, it is also advisable to keep
the tank over 50% full.
F1E0565
75
IMPORTANT Depending on the country,
there are various types of adapters for
LPG refuelling pumps. Filler adapter,
supplied with the vehicle and located in
a special case, is specifically designed
for the country in which the vehicle is
sold. If you are in a different country,
find out what type of adaptor is used
there.
F1E0111
74
88
English 
