Get KNOWING THE INSTRUMENT PANEL Guide for Fiat Tipo 4 Door Second Generation (2015-2026)

KNOWING THE INSTRUMENT PANEL

This section of the handbook provides

INSTRUMENT PANEL

FEATURES.................................. 48

all information that is useful for getting

to know, interpreting, and using the

instrument panel correctly.

DISPLAY..................................... 50

EOBD SYSTEM (European On

Board Diagnosis).......................... 57

WARNING LIGHTS AND

MESSAGES ................................ 58

47

INSTRUMENT PANEL FEATURES

BASIC INSTRUMENT PANEL

75

P2000234

1. Speedometer 2. Multifunction display 3. Tachometer 4. Fuel level digital gauge with reserve warning light 5. Digital engine

coolant temperature gauge with overheating warning light

Warning light present on Diesel versions only. On Diesel versions, the tachometer full-scale is 7000 RPM.

WARNING The illumination of the instrument panel graphics may vary according to version.

48

PREMIUM INSTRUMENT PANEL

76

P2000235

1. Digital tachometer 2. Digital speedometer 3. Fuel level digital gauge with reserve symbol

WARNING The illumination of the instrument panel graphics may vary according to version.

49

INSTRUMENT PANEL

LIGHT ADJUSTMENT

(brightness sensor)

(versions with colour display)

Versions with colour display are

equipped with a brightness sensor

(fitted inside the instrument panel)

capable of detecting ambient light

conditions and adjusting the brightness

of the instrument panel accordingly.

The behaviour of the instrument is as

follow:

DISPLAY

DESCRIPTION

The car is equipped with a display that

can show useful information to the

driver while driving.

With the ignition device in STOP

position and ignition key removed, the

display lights up and shows the time

and total odometer reading (in km or

miles) for a few seconds when a door is

opened/closed.

"daytime" mode: the display can be

set to 8 levels;

"night time" mode: the display can be

set to 8 levels.

GEAR SHIFT INDICATOR

The Gear Shift Indicator (GSI) system

gives an indication ((4) fig. 77 for

versions with basic display or (1)

fig. 78) on the premium display of the

instrument panel to advise the driver

when to change gear.

The brightness of the automatic dual

zone climate control display and

Uconnect display (for version/markets,

where provided) is also adjusted.

For adjusting, see the "Display"

paragraph in this chapter.

77

P2000078-000-000

78

P2000324

Through the GSI, the driver is informed

that the gear change will allow a

reduction in fuel consumption.

50

DRIVER ASSIST

3: total kilometres (or miles) run and

symbols of any failure indications.

4: indication of the suggested gear

shift (GSI).

When the

display, the GSI is advising the driver to

shift up, while the symbol advises

symbol appears on the

AUDIO (function available in versions

and markets where present)

PHONE (function available in versions

and markets where present)

NAVIGATION (function available in

versions and markets where present)

ALERTS

the driver to shift down.

The indication in the display remains

until a gear is shifted or the driving

conditions go back to a situation where

gearshifting is not required to improve

consumption.

VEHICLE SETUP

On some versions, the engaged

gear and the recommended one are

Vehicle Setup

This menu item allows you to change

the settings for:

Display;

displayed next to the

or

symbol.

Icons or may appear when

Units;

Clock & Date;

Safety;

Safety / Assistance;

Lights;

Doors & Locks;

the GSI recommends shifting to a gear

two steps higher than the currently

engaged one. On these versions, the

system only displays the engaged gear

when the driving conditions do not

make it necessary to change gear to

optimise fuel consumption.

Display

The indications of the engaged gear

and the recommended gear shift

temporarily disappear from the display

during a gear shift and reappear as

soon as the gear shift is finished.

By selecting item "Display" you

can access the settings/information

regarding: "Display Settings”,

Language", “Automatic reset Trip B”,

"See phone" (available in versions

and markets where present), "See

navigation" (available in versions and

markets where present), "Display

lighting”.

79

P2000078-000-000

BASIC DISPLAY

The display fig. 79 will show the

following information:

1: headlight alignment position,

indication of the gear engaged, outside

temperature, compass (where present),

date.

MAIN MENU

The Menu includes the following items:

TRIP

GSI

VEHICLE INFO

2: vehicle speed, warning

messages/any failure indications.

51

Units

Park Assist front sensor volume (for

versions/markets, where provided).

Select item "Units" to choose the unit

of measurement between: "Imperial",

"Metric", "Customised".

Lights

Select item "Lights" to make the

following adjustments: "Courtesy

lights", “Automatic lights”, "Daytime

running lights", "Cornering lights",

"Headlamp sensor", "Follow me home".

Clock & Date

Select item "Clock & Date" to make

the following adjustments: "Set Time",

"Time Format", "Set Date".

Doors & Locks

Safety

80

P2000302

Select item "Doors & Locks" to make

the following adjustments: "Autoclose",

"Flash Lights w/Lock", "Auto unlock

on exit”, “Remote unlock”, “Keyless

Entry/Go”.

Select item "Safety" to make the

following adjustments: "Passenger

AIRBAG", "Speed beep", "Seat belt

buzzer".

/

: press and release the

buttons to access the Main menu and

to scroll the menu and the submenus

upwards or downwards.

"Passenger AIRBAG" adjustment

allows you to activate/deactivate

the passenger airbag. Passenger's

protection not active: the LED

comes on constantly in the

instrument panel dashboard.

/

: press and release the

NOTE With the Uconnect™ system,

some Menu items are shown and

managed on the display of the latter

and not on the instrument panel display

(refer to the dedicated Multimedia

chapter or to the supplement available

online).

buttons to access the information

screens or the submenus of an item of

the Main menu.

OK: press this button to

access/select the info displays or the

submenus of an item of the Main

menu. Hold the button pressed for 1

second to reset the displayed/selected

functions.

Safety / Assistance

Select item "Safety & Assistance" to

make the following adjustments: Rain

sensor, Buzzer volume, Park Assist,

Park Assist Volume, Autonomous

Emergency Braking Control (AEB

Control), Traffic Sign Assist, Traffic

Sign Alarm, New speed limit alert,

Lane Control Warning, Lane Control

Strength, Driver Attention Assist,

Park Assist rear sensor volume (for

versions/markets, where provided),

CONTROL BUTTONS

These are located on the left side of the

steering wheel fig. 80.

They allow the driver to select and

interact with the items in the Main

menu of the display (see paragraph

"Main menu").

52

Screenshot list

Main screen

PREMIUM DISPLAY

The display fig. 81 will show the

following information:

Settings

Display

Safety

By pressing and releasing

/

Safety / Assistance

Engine switch off procedure

the user can choose to display:

the multifunction dial indicator

showing the speed of the car

or:

/

In the case of multiple screens,

indicates the presence of screens

to the right and/or left of those

displayed. Scrolling between

the multifunction dial indicator

showing the speed of the car, plus

the indicator recommending the

gear to engage

pages is possible using the arrows

/

.

Trip

Trip computer

The "Trip computer" screen (fig. 82)

can be used to view several

Press and release

Trip A

Trip B

/

:

81

P2001048

Top left/right area (1): compass,

external temperature, date, time, trip A

trip B, speedometer (depending on the

display customisation).

Central area of the display

(2): speed, car status information,

fuel consumption information, trip

computer, audio repetition, warning

messages / failure messages, display

and car settings.

parameters relating to the operational

status of the car. This function has

two separate memories, "Trip A" and

"Trip B", where the data for the car's

"complete journeys" (trips) is recorded

independently from each other.

Driver assist

/

Vehicle info

Press and release

Tyre pressure

Coolant temp

Oil temperature

Oil life

Traditional battery charging

AdBlue

Service (scheduled servicing)

/

:

Press the

from "Trip A" to "Trip B" and vice versa.

or

button to switch

Consumption information (3)

Bottom left area (4): Red symbols.

Bottom right area (5): Yellow

symbols.

Audio

Phone

DISPLAY PAGES

You can navigate through the following

main and detail screens using the

controls on the left side of the steering

wheel:

Navigation

Alerts

82

P2000245

53

depending on the type of warning

fig. 85.

The screen can be used to show the

following items: "Current consumption",

"Average consumption", "Distance",

"Average speed", "Travel time".

The sizes are displayed in "km"/"mi"

and "km/h"/"mph" depending on the

display settings.

Both values can be reset: press and

hold down the OK button on the

steering wheel.

NOTE The total consumption cannot

be reset.

85

P2000236

Driver assist

Refer to the "Starting and Driving"

section for more information about

driving assistance systems.

This screen in area (1) fig. 83 (for the

basic display) or (1) fig. 84 (for the

premium display) shows messages

and visual indications of the following

driving assistance systems:

Vehicle info

The screen shows the following

information:

83

P2001059

CC (Cruise Control)

TSR (Traffic Sign Recognition) / TSI

(Traffic Sign Information);

Tyre pressure

Service (scheduled servicing)

ISA (Intelligent Speed Assist).

As more recent notifications are shown,

previous notifications are overwritten.

Press the

between the "Tyre pressure" screen

and the "Service" screen.

or

button to switch

Efficiency Coach

The "Efficiency Coach" function

provides the driver with "visual

awareness" through the indications on

the instrument panel display on how

to achieve maximum energy efficiency

while driving.

84

P2001060

For some driving assistance devices,

pop-up warnings are marked in yellow

or red at the bottom of the screen

The display varies according to the

following conditions:

if the driver accelerates/brakes

54

Audio

(where provided)

Navigation

(where provided)

efficiently or, after reaching a certain

speed, he does not act on the

accelerator and/or brake pedal, the

following screen will appear on the

display Table of Contents centre

position, fig. 86 the indicator is in the

central position.

during acceleration and braking,

the most efficient operation will be

represented by the green indicator

fig. 86, while the least efficient

operation will be represented by the

yellow indicator in the intermediate

position, followed by orange one, with

the indicator at the bottom, when the

efficiency level decreases .

This screen repeats the audio playback

information shown on the Uconnect™

system:

This screen repeats the instructions

provided by the Uconnect™ system

navigator. The display can be

pictogram or map.

FM/DAB radio;

Media (USB, Bluetooth®);

Android Auto, Apple CarPlay, Baidu

Carlife.

Refer to the "Multimedia" section for

more information.

Alerts

Refer to the "Multimedia" section for

more information.

This screen displays the recorded

messages and pop-ups previously

displayed by the user (fig. 87).

(1) Symbol (where provided)

(2) Message

Phone

(where provided)

This screen repeats the information

displayed on the Uconnect™ system

while interacting with a paired phone.

The following information is shown:

Call status;

connected phone status (battery

state of charge, network reception,

incoming/outgoing call notification,

received text messages notification);

recent call list.

Driving the car in optimal conditions is

achieved when the letter "e" and the

graphic indication on the graphic bar

are shown in green in the middle of the

display screen.

Eﬃciency Coach

The system stores the last 10

received messages marked "read"

or "unread". The user can select the

desired message using the steering

87

P2000247

Settings

This screen allows the user to

customize the information and

notifications on the display and the

various functions of the car.

wheel controls

/

and open it by

Brake

Accel.

pressing the OK button on the steering

wheel.

86

P2000452

Refer to the "Multimedia" section for

more information.

NOTE The tachograph components are

illustrated below. The menus may vary

depending on the equipment of the car.

55

NOTE Some settings may be managed

using the Uconnect™ system (see

"Settings" in the "Vehicle mode"

paragraph in the "Multimedia" section).

Display

Acoustic alert volume: off, low

level, medium level, high level.

Intelligent Speed Limiter:

confirmation, automatic.

Traffic Sign Assist: enable,

disable.

Traffic Sign Assist alert: off,

visual, visual and acoustic.

New speed limit zone detection:

off, visual, visual and acoustic.

Autonomous Emergency

Braking Control (AEB Control):

off/active braking with alert.

Autonomous Emergency

Braking Control (AEB Control)

sensitivity: near/medium/far.

Park Assist: acoustic, acoustic

and visual.

Cornering lights: enable,

disable.

Dipped beam auto power off:

enable, disable.

Doors & Locks

Screen Setup: customisation of

the bottom left corner, centre and

bottom right corner of the display

(external temperature, date, time,

compass, odometer, audio info,

phone info).

Dimmer: screen brightness.

Reset trip B (never/always/every

2h/every 8h).

Automatic locking: enable,

disable.

Automatic unlock on exit:

enable, disable.

Dipped beam when closing:

enable/disable.

Remote door unlocking: all

doors, driver doors.

Passive Entry: enable, disable.

Start pairing process: start the

procedure.

Engine shutdown procedure: start

the procedure.

See phone: enable/disable.

See navigation: enable/disable.

Units of measurement: metric/

imperial.

Customisable sizes: Speed, Distance,

Consumption, Pressure, Temperature.

Date and Time

Volume Rear Park Assist: near,

medium, far.

Attention Assist warning:

enable, disable.

Time adjustment.

Mirrors and windscreen wipers

Rain sensor: enable, disable.

Lights

Format adjustment: 12

hours/24 hours.

Date setting.

Dipped beam sensitivity: 1 to 3.

Follow me Home: 0, 30, 60, 90

seconds.

Safety

Passenger AIRBAG.

Seat belt buzzer:

Automatic main beam: enable,

disable.

DRL (Daytime Running Lights):

enable, disable.

enable/disable.

Speed beep: volume

adjustment.

Safety / Assistance

56

completely, a Fiat Dealership is obliged

to run tests and, if necessary, road

tests which may also require a long

journey.

EOBD SYSTEM

(European On

Board Diagnosis)

(where provided)

OPERATION

The EOBD (European On Board

Diagnosis system) carries out

a continuous diagnosis of the

components of the car related to

emissions.

It also alerts the driver, by switching on

warning light on the instrument

the

panel, when these components are no

longer in peak condition (see “Warning

lights and messages” paragraph in this

chapter).

The aim of the EOBD system

(European On Board Diagnosis) is to:

monitor system efficiency;

indicate an increase in emissions;

indicate the need to replace

damaged components.

The car also has a connector, which

can interface with appropriate tools,

that makes it possible to read the error

codes stored in the electronic control

units together with a series of specific

parameters for engine operation and

diagnosis. This check can also be

carried out by the traffic police.

WARNING After eliminating the

anomaly, to check the system

57

WARNING LIGHTS AND MESSAGES

WARNING The warning light switches on in the instrument panel together with a dedicated message and/or acoustic signal

when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or

alternative to the information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always

refer to the information in this section in the event of a failure indication.

WARNING Failure indications displayed are divided into two categories: very serious and less serious failures. Serious faults are

indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning "cycle" with a shorter

duration. The display cycle of both categories can be interrupted. The instrument panel warning light will stay on until the cause

of the failure is eliminated.

NOTE The warning lights and symbols described below are indicative and can change based on the version or market.

Red warning lights

Warning light

What it means

INSUFFICIENT BRAKE FLUID / PARKING BRAKE ON

The warning light switches on when the ignition device is brought to MAR, but it should switch off after a few

seconds.

Low brake fluid level

The warning light turns on when the level of the brake fluid in the reservoir falls below the minimum level, possibly

due to a leak in the circuit. Restore the brake fluid level, then check that the warning light has switched off. If the

warning light stays on, contact a Fiat Dealership.

red

Parking brake on

The warning light switches on when the parking brake is engaged.

POWER STEERING FAILURE

The warning light switches on when the ignition device is brought to MAR, but it should switch off after a few

seconds. If the warning light remains on, you could not have power steering and the effort required to operate

the steering wheel could be increased; steering the car is still possible. Contact a Fiat Dealership as soon as

possible.

red

58

Warning light

What it means

EBD FAILURE

The simultaneous switching on of the

a failure of the EBD system or that the system is not available. In this case, the rear wheels may suddenly lock

and the vehicle may swerve when braking sharply.

Drive very carefully to the nearest Fiat Dealership to have the system inspected immediately.

(red) and

(amber) warning lights with the engine on indicates either

red

amber

SEAT BELTS REMINDER

The warning light switches on constantly if the vehicle is stationary and the driver side or passenger side seat

belt (for versions/markets, where provided), with the passenger seated, is not fastened. The warning light flashes

and an acoustic warning will sound if the car is in motion and the driver side or passenger side seat belt (for

versions/markets, where provided), with the passenger seated, is not correctly fastened. In this case, fasten the

seat belt.

red

ENGINE COOLANT TEMPERATURE TOO HIGH

The warning light on the display lights up when the engine has overheated.

In normal driving conditions: stop the car, switch off the engine and check that the coolant level in the

reservoir is not below the MIN mark. In this case, wait for the engine to cool down, then slowly and carefully

open the cap, top up with coolant and check that the level is between the MIN and MAX marks on the reservoir

itself. Also check visually for any fluid leaks. If, when restarting, the warning light on the display switches on

again, contact a Fiat Dealership.

If the vehicle is used under demanding conditions (e.g. in high-performance driving): slow down and, if

the warning light stays on, stop the vehicle. Stop for two or three minutes with the engine running and slightly

accelerated to facilitate better coolant circulation, then turn the engine off. Check that the coolant level is correct

as described above.

red

IMPORTANT Over demanding routes, it is advisable to keep the engine running and slightly accelerated for a few

minutes before turning it off.

AIRBAG FAILURE

If the warning light switches on constantly, this indicates a failure in the airbag system.

38) 39)

red

59

Warning light

What it means

HANDS NOT DETECTED ON STEERING WHEEL

(for versions/markets, where provided)

The light comes on if the driver’s hands are not detected on the steering wheel.

red

Amber warning lights

Warning light

What it means

iTPMS

(For versions/markets where provided)

iTPMS failure/iTPMS temporarily deactivated

The warning light flashes for about 75 seconds and then stays on constantly to indicate that the system is

temporarily deactivated or faulty. The system will go back to normal operation when the operating conditions will

allow it. If this is not the case, carry out the Reset procedure after restoring the normal operating conditions.

If the malfunction warning persists, contact a Fiat Dealership as soon as possible.

Low tyre pressure

The warning light switches on constantly to indicate that the pressure of one or more tyres is lower than the

recommended value and/or that slow pressure loss is occurring. In these cases, optimal tyre duration and fuel

consumption may not be guaranteed. It is advisable to restore the correct pressure value (see the "Wheels"

paragraph in the "Technical Specifications" section).

amber

Once the normal operating conditions of the car are restored, carry out the "Reset" procedure.

IMPORTANT Do not continue driving with one or more flat tyres as the car handling may be compromised. Stop

the car, avoiding sharp braking and steering.

ABS FAILURE

The warning light switches on to indicate an ABS fault. In this case the braking system maintains its efficiency

unaltered but without the advantage of the ABS system. Drive carefully and contact a Fiat Dealership as soon as

possible.

amber

ESC SYSTEM (where provided)

ESC system activation

Intervention by the system is indicated by the flashing of the warning light: it indicates that the car is in critical

stability and grip conditions.

60

Warning light

What it means

ESC/Traction Plus system failure (where provided)

If the warning light does not switch off, or if it stays on with the engine running, a failure was found on the ESC

system/Traction Plus system. Contact a Fiat Dealership as soon as possible.

Hill Hold Control system failure

The warning light turns on to indicate a Hill Holder Control system failure. Contact a Fiat Dealership as soon as

possible.

amber

PARTIAL DEACTIVATION OF ACTIVE SAFETY SYSTEMS

The warning light switches on to indicate that some active safety systems have been partially deactivated. When

the systems are reactivated, the warning light switches off.

amber

REAR FOG LIGHT

The warning light switches on when the rear fog light is turned on.

INJECTION / EOBD SYSTEM FAILURE

In normal conditions, when the ignition device is brought to MAR, the warning light switches on, but it should

switch off as soon as the engine is started. The operation of the warning light may be checked by the traffic

police using specific devices. Comply with the laws and regulations of the country where you are driving.

13)

Injection system failure

If the warning light remains on, or it switches on whilst driving, the injection system is not working properly. The

warning light on constantly signals a malfunction in the supply/ignition system which could cause high exhaust

emissions, a possible loss of performance, poor driveability and high consumption. The warning light switches off

if the malfunction disappears, but is still stored by the system. Under these conditions, you can continue travelling

at moderate speed but without demanding excessive effort from the engine or high speed. Prolonged use of the

car with the warning light on fixed may cause damage. Contact a Fiat Dealership as soon as possible.

Catalytic converter damage

amber

If the warning light flashes, it means that the catalytic converter may be damaged.

Release the accelerator pedal to lower the speed of the engine until the warning light stops flashing. Continue the

journey at moderate speed, trying to avoid driving conditions that may cause further flashing and contact a Fiat

Dealership as soon as possible.

61

Warning light

What it means

UREA INJECTION SYSTEM FAILURE (Diesel versions)

(for versions/markets, where provided)

The warning light switches on if a fluid not conforming with the nominal characteristics is added or if an average

UREA consumption of more than 50% is detected.

Contact a Fiat Dealership as soon as possible.

If the problem is not solved, a dedicated message will appear on the instrument panel display whenever a certain

threshold is reached until it will no longer be possible to start the engine.

When 200 km will remain to prevent the engine restart, a continuous dedicated message will appear on the

dashboard (for versions/markets, where provided) accompanied by an acoustic warning sound.

amber

GLOW PLUG PREHEATING (Diesel versions)

This warning light or symbol comes on when moving the ignition device to MAR and will switch off when the glow

plugs have reached the preset temperature. The engine can be started as soon as the warning light switches off.

WARNING In mild or high temperature conditions, the warning light comes on for a very short time only.

GLOW PLUG PREHEATING FAILURE (Diesel versions)

amber

The warning light will flash to indicate a failure in the glow plug preheating system. In this case, contact a Fiat

Dealership as soon as possible.

FUEL RESERVE / LIMITED RANGE

This warning light on the display comes on when about 5 to 7 litres of fuel are left in the tank.

14)

amber

AUTONOMOUS EMERGENCY BRAKING CONTROL SYSTEM (AEB Control)

(for versions/markets, where provided)

The warning light or the symbol turns on when the Autonomous Emergency Braking Control (AEB Control)

system is deactivated by the driver or in the event of automatic deactivation following a temporary system failure.

Contact a Fiat Dealership as soon as possible.

START&STOP SYSTEM MANUAL ACTIVATION / DEACTIVATION

(for versions/markets, where provided)

The warning light or symbol also appears on the display if the Start&Stop system is deactivated.

62

Warning light

What it means

LANE CONTROL SYSTEM (where provided)

The warning light turns on fixed yellow when the car approaches the lane line. The warning light flashes when the

car crosses the lane line. Refer to “Lane Control" in “Starting and driving” for more information.

amber

Green warning lights

Warning light

What it means

“DUALDRIVE” ELECTRIC POWER STEERING SYSTEM ACTIVATION

(For versions/markets where provided)

The indication CITY switches on when the "Dualdrive" electric power steering system is activated by pressing the

relative control button. If the button is pressed again the word CITY goes out.

green

SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS

The warning light switches on when the side/tail lights or dipped headlights are turned on.

This function allows the headlights to remain on for 30, 60 or 90 seconds after the ignition device was placed in

STOP position ("Follow me home" function).

FOG LIGHTS

The warning light comes on when the front fog lights are turned on.

AUTOMATIC MAIN BEAM HEADLIGHTS

This warning light comes on when the automatic main beam headlights are activated.

green

LEFT DIRECTION INDICATOR

The warning light switches on when the direction indicator stalk is moved downwards or, together with the right

direction indicator, when the hazard warning light button is pressed.

63

Warning light

What it means

RIGHT DIRECTION INDICATOR

The warning light switches on when the direction indicator stalk is moved upwards or, together with the left

direction indicator, when the hazard warning light button is pressed.

green

LANE CONTROL SYSTEM (where provided)

The Lane Control warning light is on steady in green when one or both lane limits have been detected and the

system is active and ready to provide visual warnings and a torque warning if the lane is left involuntarily.

Refer to the “Lane Control System” chapter in the “Starting and driving” section for further information.

TRACTION PLUS SYSTEM ACTIVATION

(for versions/markets, where provided)

This warning light or symbol also appears on the display in the event of a Traction Plus system activation.

green

Blue warning lights

Warning light

What it means

MAIN BEAM HEADLIGHTS

The warning light switches on when the main beam headlights are turned on.

blue

White warning lights

Warning light

What it means

LANE CONTROL FAILURE

The warning light switches on in the case of failure of the Lane Control device. Contact a Fiat Dealership as soon

as possible to have the failure eliminated.

white

64

SYMBOLS AND MESSAGES ON THE DISPLAY

ꢀ

Symbol

What it means

AIRBAG FAILURE

The symbol switches on if there is an airbag system failure. Contact a Fiat Dealership as soon as possible.

red

LOW ENGINE OIL PRESSURE

The symbol switches on in the case of insufficient engine oil pressure.

15)

WARNING Do not use the car until the failure has been solved. The switching on of the symbol does not show

the quantity of oil in the engine: the oil level must be checked manually.

ALTERNATOR FAILURE

The switching on of the symbol with engine on corresponds to an alternator failure. Contact a Fiat Dealership as

soon as possible.

red

DOORS OPEN

The symbol switches on when one or more doors are not completely shut. An acoustic warning is activated with

the doors open and the car moving. Close the doors properly.

red

BONNET NOT PROPERLY SHUT

The symbol switches on when the engine bonnet is not properly shut (for versions/markets, where provided).

Close the bonnet properly.

TAILGATE NOT PROPERLY SHUT

The symbol switches on when the tailgate is not properly shut (for versions/markets, where provided). Close the

tailgate correctly.

red

65

Symbol

What it means

DUAL CLUTCH AUTOMATIC TRANSMISSION FAILURE

The symbol switches on, together with an acoustic warning, to indicate the failure of the dual clutch automatic

transmission. Contact a Fiat Dealership as soon as possible.

red

DAA SYSTEM (Drive Attention Assist) INTERVENTION

The symbol comes on in the event of a DAA (Driver Attention Assist) system intervention. The system, after

estimating the driver’s drowsiness level, through specific events, suggests to the driver to stop for a break,

because continuing driving is risky. Stop to pause while driving, pulling the car over in safe conditions.

16)

red

HANDS NOT DETECTED ON STEERING WHEEL

(for versions/markets, where provided)

The symbol appears if the driver’s hands are not detected on the steering wheel.

red

DAA SYSTEM (Drive Attention Assist) FAILURE

The symbol comes on in the event of a DAA (Driver Attention Assist) system failure. Contact a Fiat Dealership.

yellow amber

KEYLESS ENTRY/GO SYSTEM FAILURE

The symbol comes on in the event of a Keyless Entry/Go system failure. Contact a Fiat Dealership as soon as

possible.

yellow amber

ENGINE OIL PRESSURE SENSOR FAILURE

The symbol switches on in the event of engine oil level sensor failure.

DUAL CLUTCH AUTOMATIC TRANSMISSION OVERTEMPERATURE

The symbol switches on in the case of transmission overheating, after a particularly demanding use. In this case

an engine performance limitation is carried out. With engine off or at idle speed, wait until the symbol switches

off.

yellow amber

RAIN SENSOR FAILURE

The symbol switches on in the case of failure of the rain sensor. Contact a Fiat Dealership as soon as possible.

66

Symbol

What it means

FUEL CUT-OFF SYSTEM OPERATION

The symbol switches on in the event of fuel cut-off system intervention.

For reactivating the fuel cut-off system, refer to the description in the "Fuel cut-off system" section in the "In an

emergency" chapter. If it is still not possible to restore the fuel supply, contact a Fiat Dealership.

yellow amber

FUEL CUT-OFF SYSTEM FAILURE

The symbol switches on in the event of fuel cut-off system failure. Contact a Fiat Dealership as soon as possible.

START&STOP SYSTEM FAILURE

(for versions/markets, where provided)

The symbol switches on to report a failure of the Start&Stop system. Contact a Fiat Dealership as soon as

possible.

yellow amber

EXTERNAL LIGHTS FAILURE

The symbol switches on to indicate a failure on the following lights: daytime running lights (D.R.L.); parking lights;

side lights; direction indicators; rear fog light; reversing light; number plate lights.

The anomaly may be caused by a blown bulb, a blown protection fuse or an interruption of the electrical

connection.

FUEL LEVEL SENSOR FAILURE

The symbol switches on in the event of fuel level sensor failure. Contact a Fiat Dealership.

yellow amber

WATER IN DIESEL FILTER (Diesel versions)

The warning light or the symbol switches on fixed while driving to indicate the presence of water in the diesel

filter.

14)

POSSIBLE ICE ON ROAD

The symbol turns on when the external temperature falls to or below 3°C.

WARNING In the event of external temperature sensor failure, the digits that indicate the value are replaced by

dashes.

yellow amber

67

Symbol

What it means

FIAT CODE SYSTEM FAILURE

The symbol switches on to indicate a failure of the Fiat CODE system. Contact a Fiat Dealership as soon as

possible.

yellow amber

DUSK SENSOR FAILURE

The symbol switches on in the case of failure of the dusk sensor. Contact a Fiat Dealership as soon as possible.

SOUND SYSTEM FAILURE

The symbol switches on to report a failure of the sound system. Contact a Fiat Dealership as soon as possible.

yellow amber

PARK ASSIST SYSTEM FAILURE

The yellow symbol switches on in the case of temporary failure of the Park Assist system. If the problem is still

present after cleaning the parking sensor area, contact a Fiat Dealership.

The red symbol comes on in the case of permanent Park Assist system failure. The failed operation of the system

might be due to the insufficient voltage from the traditional battery or other failures on the electrical system.

Contact a Fiat Dealership as soon as possible.

AUTONOMOUS EMERGENCY BRAKING CONTROL (AEB Control) SYSTEM FAILURE

The yellow symbol switches on in the case of the temporary failure of the Autonomous Braking Control (AEB

Control) system. Contact a Fiat Dealership as soon as possible.

The red symbol switches on in the case of permanent failure of the Autonomous Braking Control (AEB Control)

system. Contact a Fiat Dealership as soon as possible.

yellow amber

BLIND SPOT ASSIST SYSTEM FAILURE

The symbol comes on in the event of a Blind Spot Assist system failure. Contact a Fiat Dealership as soon as

possible.

68

Symbol

What it means

SPEED LIMITER FAILURE

The symbol switches on in the case of failure of the Speed Limiter device. Contact a Fiat Dealership as soon as

possible to have the failure eliminated.

yellow amber

TRAFFIC SIGN RECOGNITION SYSTEM FAILURE

The symbol comes on in the event of a Traffic Sign Recognition system failure. Contact a Fiat Dealership as soon

as possible.

TRAFFIC SIGN RECOGNITION SENSOR BLINDED

In the event of a temporary condition that inhibits the use of the camera (such as grazing sun, rain, fog, snow or

dirt) the symbol will light up temporarily until conditions are restored and the system can be used again.

yellow amber

TRAFFIC SIGN RECOGNITION SYSTEM DEACTIVATED

The symbol comes on if the Traffic Sign Recognition system is off.

yellow amber

LANE CONTROL SYSTEM

The symbol will be solid yellow when the car is approaching a lane marker. The symbol will flash when the car

is crossing the lane marker. Refer to “Lane Control" in “Starting and driving” for more information.

LANE CONTROL SYSTEM FAILURE

The symbol comes on in the event of a Lane Control system failure. Contact a Fiat Dealership as soon as

possible.

LANE CONTROL SYSTEM SENSOR BLINDED

In the event of a temporary condition that inhibits the use of the camera (such as grazing sun, rain, fog, snow or

dirt) the symbol will light up temporarily until conditions are restored and the system can be used again.

yellow amber

LANE CONTROL SYSTEM DEACTIVATED

The symbol switches on if the Lane Control system is deactivated.

yellow amber

69

Symbol

What it means

SCHEDULED SERVICING (SERVICE)

The “Service Schedule” includes car maintenance at fixed intervals (refer to the "Maintenance and care" chapter).

When the next scheduled service is approaching, the symbol will be displayed, followed by the number of

kilometres/miles or days (where provided) left, when the ignition device is turned to MAR.

This is displayed automatically, with ignition device at MAR, 2000 km before servicing or, where provided, 30

days before servicing. It is also displayed each time the ignition device is turned to MAR.

The display will be in km or miles according to the unit of measurement set. Go to a Fiat Dealership, where the

"Scheduled Servicing Plan" work will be performed and the message will be reset.

yellow amber

CLUTCH PEDAL

This symbol lights up to indicate that the clutch pedal must be pressed to enable starting for versions with

manual gearbox.

DPF CLEANING (particulate trap) in progress (diesel versions with DPF only)

The symbol switches on constantly to indicate that the DPF system needs to eliminate the trapped pollutants

(particulate) through the regeneration process. The symbol stays off during the entire DPF regeneration

and lights up only when driving conditions require the driver to be notified.

The symbol does not switch on during every DPF regeneration, but only when driving conditions require that

the driver is notified. To turn off the symbol, keep the car in motion until the regeneration process is over. The

process normally takes about 15 minutes. Optimal conditions for completing the process are achieved by

travelling at 60 km/h with engine speed above 2000 rpm.

When this symbol switches on, it does not indicate a defect of the car and thus it should not be taken to a

workshop.

yellow amber

WARNING Failure to follow the required procedure when the DPF warning light comes on for a

mileage equal to or greater than 30 km or for a cumulative time equal to or greater than 2 hours, may

result in the warning light coming on with consequent damage to the DPF device. Remember that

if the warning light is on, it is necessary to go to the Dealership to restore the DPF to correct

operation.

70

Symbol

What it means

GPF CLEANING (particulate filter) in progress (petrol versions only with GPF) (where provided)

The symbol switches on constantly to indicate that the GPF system needs to eliminate the trapped pollutants

(particulate) through the regeneration process.

The symbol does not light up on during every GPF regeneration, but only when driving conditions require that the

driver is notified.

To turn off the symbol, keep the car in motion until the regeneration process is over. The optimal conditions for

completing the process are achieved by varying the speed of the car (press and release the accelerator pedal).

Maintain a speed above 60 km/h, on an extra-urban route, with an engine speed above 2000 rpm until the

symbol turns off.

yellow amber

When this symbol switches on, it does not indicate a fault and thus it should not be taken to a workshop.

GPF FAILURE (particulate filter) (petrol versions only with GPF) (where provided)

The symbol lights up fixed together with the warning light and dedicated messages appear on the display in case

of failure to the GPF (Gasoline Particulate Filter).

In this case, contact a Fiat Dealership as soon as possible.

INDICATION OF DIESEL EMISSIONS ADDITIVE LOW LEVEL (UREA)

(for versions/markets, where provided)

The Diesel Emissions Additive (UREA) low level symbol lights when the UREA level is low.

Top up the UREA tank as soon as possible with at least 5 litres of UREA. If topping up is done with remaining

range of UREA in the tank equal to zero, you may need to wait 2 minutes before starting the engine.

yellow amber

AUTOMATIC HIGH BEAM HEADLIGHTS FAILURE

The symbol switches on to report a failure of the automatic main beam headlights. Contact a Fiat Dealership as

soon as possible.

71

Symbol

What it means

DEGRADED ENGINE OIL (where provided)

Diesel versions: the symbol is shown on the display. The symbol is displayed for 3 minute cycles and intervals

of 5 seconds until oil is changed. The symbol is displayed until the problem is solved.

Petrol versions: the symbol switches on and then is not displayed when the display cycle is completed.

WARNING After the first indication, each time the engine is started the symbol will continue to switch on as

described above until the oil is changed.

If the symbol flashes, this does not mean that there is a fault on the car, rather it simply reports that it is now

necessary to change the oil as a result of regular use of the car. The deterioration of engine oil is accelerated

by using the car for short drives, preventing the engine from reaching operating temperature. Contact a Fiat

Dealership as soon as possible.

yellow amber

17) 18)

START&STOP SYSTEM ACTIVATION

(for versions/markets, where provided)

The symbol switches on to report the activation of the Start&Stop system.

green

“DUALDRIVE” ELECTRIC POWER STEERING SYSTEM ACTIVATION

The indication CITY switches on when the "Dualdrive" electric power steering system is activated by pressing the

relative control button. If the button is pressed again the word CITY goes out.

INTELLIGENT SPEED ASSIST SYSTEM ACTIVATION (where provided)

The symbol comes on in the event of a Intelligent Speed Assist system failure.

green

ELECTRONIC CRUISE CONTROL

The symbol comes on in the event of a Cruise Control system failure.

SPEED LIMITER

The symbol comes on in the event of a Speed Limiter system failure.

green

72

Symbol

What it means

LANE CONTROL SYSTEM

The Lane Control symbol comes on continuously green when one or both lane markings have been detected and

the system is active and ready to provide visual and torque warnings if an unintentional lane departure occurs.

Refer to the “Lane Control System” chapter in the “Starting and driving” section for further information.

green

LANE CONTROL SYSTEM

When the Lane Control system is active but not enabled, the symbol comes on continuously white. This occurs

when only left, right, or neither lane line has been detected. If a single lane line is detected, the system is ready to

provide only visual warnings if an unintentional lane departure occurs on the detected lane line.

Refer to the “Lane Control System” chapter in the “Starting and driving” section for further information.

white

BEAM HEIGHT

The symbol indicates the height of the dipped beam headlamps, set to four levels (0-4) using buttons

and

.

white

GEAR SHIFT ADVICE

This symbol appears to suggest engaging a higher gear (upshifting).

white

GEAR SHIFT ADVICE

The symbol appears to suggest engaging a lower gear (downshifting).

SPEED LIMIT EXCEEDED

The (white) symbol switches on when the speed limit (e.g. 110 km/h) set through the menu of the display is

exceeded (the inner value updates according to the set speed).

white

START&STOP SYSTEM ACTIVATION

(for versions/markets, where provided)

The symbol comes on to indicate that the engine has been stopped by the Start&Stop system.

73

Symbol

What it means

ELECTRONIC CRUISE CONTROL

The symbol appears when the electronic Cruise Control is turned on.

white

NOTE Some warning lights come on cyclically for a few seconds to run a safety check (for versions/markets, where provided) when the engine

is started. Contact a dealership in the event of faults (warning lights stay on, etc.). The warning lights will go out if there are no faults.

74

Messages on display

What it means

What to do

INDICATION OF DIESEL EMISSIONS ADDITIVE LOW

LEVEL (UREA)

(for versions/markets, where provided)

When low UREA level is detected, a text message will

appear on the instrument panel display, together with

the symbol

up.

The symbol

to indicate that UREA must be topped

stays on until the tank is topped up

®

with at least 5 litres of UREA.

Top up the AdBlue (UREA) tank as soon as possible

with at least 5 litres. If topping up is done with

remaining range of AdBlue® (UREA) in the tank equal to

zero, you may need to wait 2 minutes before starting

the engine.

If you do not top up, a specific message will appear

on the instrument panel display whenever a certain

threshold is reached until it will no longer be possible

to start the engine.

A message appears continuously on the display

when the residual range is approximately 200 km

accompanied by an auditory indication.

19)

When the residual range is 0 km, a specific message

will appear on the display (for versions/markets, where

provided). It will no longer be possible to restart the

engine after it has been stopped.

It will be possible to restart the engine after pouring at

least 5 litres of UREA in the tank.

BLIND SPOT ASSIST SYSTEM

(where provided)

Sensor block

BLIND SPOT ASSIST

A message will appear on the display if the Blind

Spot Assist system sensor is blocked. In this case,

the LEDs on the door mirrors are switched on

continuously.

Free the bumper of any obstacles or clean it.

75

What it means

System not available

A message will appear on the display if the Blind

Spot Assist system sensor is not available. In this

case, the LEDs on the door mirrors are switched on

continuously.

What to do

The failed operation of the system might be due to

the insufficient voltage from the traditional battery or

other failures on the electrical system. Contact a Fiat

Dealership as soon as possible to have the electrical

system checked.

BLIND SPOT ASSIST

Blind Spot Assist system failure

A message will appear on the display if the Blind Spot

Assist system sensor is faulty. In this case, the LEDs

on the door mirrors are switched off. An acoustic

warning is also emitted.

Contact a Fiat Dealership as soon as possible to have

the failure eliminated.

LANE CONTROL SYSTEM

Camera obstructed

A dedicated message is shown on the display in the

case of dirt on the windscreen, which may adversely

affect correct operation of the camera.

Clean the windscreen using a soft clean cloth, taking

care not to scratch it. Should the failure persist, contact

a Fiat Dealership as soon as possible.

LANE CONTROL

System not available

A dedicated message is shown on the display if the

Lane Control system is not available.

Contact a Fiat Dealership as soon as possible.

SISTEMA AUTONOMOUS EMERGENCY BRAKING

CONTROL

The “BRAKE!” message appears on the display when

the Autonomous Emergency Braking Control (AEB

Control) system is activated.

Increase your distance from the vehicle ahead to

prevent the risk of collisions.

AUTONOMOUS

EMERGENCY BRAKING

CONTROL

A dedicated message is shown on the display if the

Autonomous Emergency Braking Control system is not

available.

Camera obstructed

Clean the windscreen using a soft clean cloth, taking

care not to scratch it. Should the failure persist, contact

a Fiat Dealership as soon as possible.

A dedicated message is shown on the display in the

case of dirt on the windscreen, which may adversely

affect correct operation of the camera.

76

What it means

System not available

A dedicated message is shown on the display if the

Autonomous Emergency Braking Control system is not

available.

What to do

AUTONOMOUS

EMERGENCY BRAKING

CONTROL

Contact a Fiat Dealership as soon as possible.

SCHEDULED SERVICING (SERVICE)

When the next scheduled service deadline is

approaching, the word "Service" will be displayed,

followed by the number of kilometres/miles or days

(where provided) left, when the ignition device is

turned to MAR.

This is displayed automatically, with ignition device at

MAR, 2000 km before servicing or, where provided,

30 days before servicing. It is also displayed each time

the ignition device is turned to MAR. The display

will be in km or miles depending on the unit of

measurement set.

“SERVICE” MESSAGE

(SCHEDULED

SERVICING)

Go to a Fiat Dealership, where the "Scheduled Servicing

Plan" work will be performed and the message will be

reset.

DISPLAY FAILURE

All warning lights flashing All the warning lights flash in the event of an

instrument panel display failure.

Contact a Fiat Dealership as soon as possible.

CONTROL SYSTEM WARNING LIGHT FAILURE

Message to have the

warning light checked

The failure of the control system warning light is

indicated by a message on the instrument panel

display.

IMPORTANT

38) If, when the ignition device is turned to MAR, the warning light

does not switch on or stays on while driving, a failure may have

occurred in the restraint systems. In this case the airbags or pretensioners may not be deployed in an impact or, in a lower number of cases,

they may be deployed accidentally. Before continuing, contact a Fiat Dealership immediately to have the system checked.

77

39) The failure of the

warning light is signalled by the lighting up of the symbol

on the instrument panel display (or, for versions where

provided, by the flashing of the generic failure warning light). In this case, the warning light may not indicate any faults with the restraint

systems. Before continuing, contact a Fiat Dealership immediately to have the system checked.

WARNING

13) If, turning the ignition device to MAR, the warning light

Dealership as soon as possible.

14) The presence of water in the fuel system circuit may cause severe damage to the injection system and irregular engine operation. If the

does not turn on or if it turns on steadily or flashing while driving, contact a Fiat

symbol is displayed contact a Fiat Dealership as soon as possible to bleed the system. If the above indications come on immediately after

refuelling, water has probably been poured into the tank: switch the engine off immediately and contact a Fiat Dealership.

15) If the

symbol switches on while driving, stop the engine immediately and contact a Fiat Dealership.

16) Driving the vehicle with this symbol on may severely damage the transmission, with resulting breakage. The oil may also overheat: contact

with hot engine or with exhaust components at high temperature could cause fires.

17) Degraded engine oil should be replaced as soon as possible after the warning light

comes on, and never more than 500 km after it first

comes on. Failure to observe the above may result in severe damage to the engine and invalidate the warranty. Remember that when this

warning light comes on, it does not mean that the level of engine oil is low, so if it flashes it does not mean that you need to top

up the engine oil.

18) If the warning light flashes when driving, contact a Fiat Dealership.

®

19) When the AdBlue (UREA) tank is empty and the engine is stopped it is no longer possible to restart it until the AdBlue (UREA) tank is

topped up with at least 5 litres.

78

KNOWING THE INSTRUMENT PANEL for Your Fiat Tipo 4 Door Second Generation (2015-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals