Get KNOWING THE INSTRUMENT PANEL -> DISPLAY Guide for Fiat Tipo 4 Door Second Generation (2015-2026)

INSTRUMENT PANEL

LIGHT ADJUSTMENT

(brightness sensor)

(versions with colour display)

Versions with colour display are

equipped with a brightness sensor

(fitted inside the instrument panel)

capable of detecting ambient light

conditions and adjusting the brightness

of the instrument panel accordingly.

The behaviour of the instrument is as

follow:

DISPLAY

DESCRIPTION

The car is equipped with a display that

can show useful information to the

driver while driving.

With the ignition device in STOP

position and ignition key removed, the

display lights up and shows the time

and total odometer reading (in km or

miles) for a few seconds when a door is

opened/closed.

"daytime" mode: the display can be

set to 8 levels;

"night time" mode: the display can be

set to 8 levels.

GEAR SHIFT INDICATOR

The Gear Shift Indicator (GSI) system

gives an indication ((4) fig. 77 for

versions with basic display or (1)

fig. 78) on the premium display of the

instrument panel to advise the driver

when to change gear.

The brightness of the automatic dual

zone climate control display and

Uconnect display (for version/markets,

where provided) is also adjusted.

For adjusting, see the "Display"

paragraph in this chapter.

77

P2000078-000-000

78

P2000324

Through the GSI, the driver is informed

that the gear change will allow a

reduction in fuel consumption.

50

DRIVER ASSIST

3: total kilometres (or miles) run and

symbols of any failure indications.

4: indication of the suggested gear

shift (GSI).

When the

display, the GSI is advising the driver to

shift up, while the symbol advises

symbol appears on the

AUDIO (function available in versions

and markets where present)

PHONE (function available in versions

and markets where present)

NAVIGATION (function available in

versions and markets where present)

ALERTS

the driver to shift down.

The indication in the display remains

until a gear is shifted or the driving

conditions go back to a situation where

gearshifting is not required to improve

consumption.

VEHICLE SETUP

On some versions, the engaged

gear and the recommended one are

Vehicle Setup

This menu item allows you to change

the settings for:

Display;

displayed next to the

or

symbol.

Icons or may appear when

Units;

Clock & Date;

Safety;

Safety / Assistance;

Lights;

Doors & Locks;

the GSI recommends shifting to a gear

two steps higher than the currently

engaged one. On these versions, the

system only displays the engaged gear

when the driving conditions do not

make it necessary to change gear to

optimise fuel consumption.

Display

The indications of the engaged gear

and the recommended gear shift

temporarily disappear from the display

during a gear shift and reappear as

soon as the gear shift is finished.

By selecting item "Display" you

can access the settings/information

regarding: "Display Settings”,

Language", “Automatic reset Trip B”,

"See phone" (available in versions

and markets where present), "See

navigation" (available in versions and

markets where present), "Display

lighting”.

79

P2000078-000-000

BASIC DISPLAY

The display fig. 79 will show the

following information:

1: headlight alignment position,

indication of the gear engaged, outside

temperature, compass (where present),

date.

MAIN MENU

The Menu includes the following items:

TRIP

GSI

VEHICLE INFO

2: vehicle speed, warning

messages/any failure indications.

51

Units

Park Assist front sensor volume (for

versions/markets, where provided).

Select item "Units" to choose the unit

of measurement between: "Imperial",

"Metric", "Customised".

Lights

Select item "Lights" to make the

following adjustments: "Courtesy

lights", “Automatic lights”, "Daytime

running lights", "Cornering lights",

"Headlamp sensor", "Follow me home".

Clock & Date

Select item "Clock & Date" to make

the following adjustments: "Set Time",

"Time Format", "Set Date".

Doors & Locks

Safety

80

P2000302

Select item "Doors & Locks" to make

the following adjustments: "Autoclose",

"Flash Lights w/Lock", "Auto unlock

on exit”, “Remote unlock”, “Keyless

Entry/Go”.

Select item "Safety" to make the

following adjustments: "Passenger

AIRBAG", "Speed beep", "Seat belt

buzzer".

/

: press and release the

buttons to access the Main menu and

to scroll the menu and the submenus

upwards or downwards.

"Passenger AIRBAG" adjustment

allows you to activate/deactivate

the passenger airbag. Passenger's

protection not active: the LED

comes on constantly in the

instrument panel dashboard.

/

: press and release the

NOTE With the Uconnect™ system,

some Menu items are shown and

managed on the display of the latter

and not on the instrument panel display

(refer to the dedicated Multimedia

chapter or to the supplement available

online).

buttons to access the information

screens or the submenus of an item of

the Main menu.

OK: press this button to

access/select the info displays or the

submenus of an item of the Main

menu. Hold the button pressed for 1

second to reset the displayed/selected

functions.

Safety / Assistance

Select item "Safety & Assistance" to

make the following adjustments: Rain

sensor, Buzzer volume, Park Assist,

Park Assist Volume, Autonomous

Emergency Braking Control (AEB

Control), Traffic Sign Assist, Traffic

Sign Alarm, New speed limit alert,

Lane Control Warning, Lane Control

Strength, Driver Attention Assist,

Park Assist rear sensor volume (for

versions/markets, where provided),

CONTROL BUTTONS

These are located on the left side of the

steering wheel fig. 80.

They allow the driver to select and

interact with the items in the Main

menu of the display (see paragraph

"Main menu").

52

Screenshot list

Main screen

PREMIUM DISPLAY

The display fig. 81 will show the

following information:

Settings

Display

Safety

By pressing and releasing

/

Safety / Assistance

Engine switch off procedure

the user can choose to display:

the multifunction dial indicator

showing the speed of the car

or:

/

In the case of multiple screens,

indicates the presence of screens

to the right and/or left of those

displayed. Scrolling between

the multifunction dial indicator

showing the speed of the car, plus

the indicator recommending the

gear to engage

pages is possible using the arrows

/

.

Trip

Trip computer

The "Trip computer" screen (fig. 82)

can be used to view several

Press and release

Trip A

Trip B

/

:

81

P2001048

Top left/right area (1): compass,

external temperature, date, time, trip A

trip B, speedometer (depending on the

display customisation).

Central area of the display

(2): speed, car status information,

fuel consumption information, trip

computer, audio repetition, warning

messages / failure messages, display

and car settings.

parameters relating to the operational

status of the car. This function has

two separate memories, "Trip A" and

"Trip B", where the data for the car's

"complete journeys" (trips) is recorded

independently from each other.

Driver assist

/

Vehicle info

Press and release

Tyre pressure

Coolant temp

Oil temperature

Oil life

Traditional battery charging

AdBlue

Service (scheduled servicing)

/

:

Press the

from "Trip A" to "Trip B" and vice versa.

or

button to switch

Consumption information (3)

Bottom left area (4): Red symbols.

Bottom right area (5): Yellow

symbols.

Audio

Phone

DISPLAY PAGES

You can navigate through the following

main and detail screens using the

controls on the left side of the steering

wheel:

Navigation

Alerts

82

P2000245

53

depending on the type of warning

fig. 85.

The screen can be used to show the

following items: "Current consumption",

"Average consumption", "Distance",

"Average speed", "Travel time".

The sizes are displayed in "km"/"mi"

and "km/h"/"mph" depending on the

display settings.

Both values can be reset: press and

hold down the OK button on the

steering wheel.

NOTE The total consumption cannot

be reset.

85

P2000236

Driver assist

Refer to the "Starting and Driving"

section for more information about

driving assistance systems.

This screen in area (1) fig. 83 (for the

basic display) or (1) fig. 84 (for the

premium display) shows messages

and visual indications of the following

driving assistance systems:

Vehicle info

The screen shows the following

information:

83

P2001059

CC (Cruise Control)

TSR (Traffic Sign Recognition) / TSI

(Traffic Sign Information);

Tyre pressure

Service (scheduled servicing)

ISA (Intelligent Speed Assist).

As more recent notifications are shown,

previous notifications are overwritten.

Press the

between the "Tyre pressure" screen

and the "Service" screen.

or

button to switch

Efficiency Coach

The "Efficiency Coach" function

provides the driver with "visual

awareness" through the indications on

the instrument panel display on how

to achieve maximum energy efficiency

while driving.

84

P2001060

For some driving assistance devices,

pop-up warnings are marked in yellow

or red at the bottom of the screen

The display varies according to the

following conditions:

if the driver accelerates/brakes

54

Audio

(where provided)

Navigation

(where provided)

efficiently or, after reaching a certain

speed, he does not act on the

accelerator and/or brake pedal, the

following screen will appear on the

display Table of Contents centre

position, fig. 86 the indicator is in the

central position.

during acceleration and braking,

the most efficient operation will be

represented by the green indicator

fig. 86, while the least efficient

operation will be represented by the

yellow indicator in the intermediate

position, followed by orange one, with

the indicator at the bottom, when the

efficiency level decreases .

This screen repeats the audio playback

information shown on the Uconnect™

system:

This screen repeats the instructions

provided by the Uconnect™ system

navigator. The display can be

pictogram or map.

FM/DAB radio;

Media (USB, Bluetooth®);

Android Auto, Apple CarPlay, Baidu

Carlife.

Refer to the "Multimedia" section for

more information.

Alerts

Refer to the "Multimedia" section for

more information.

This screen displays the recorded

messages and pop-ups previously

displayed by the user (fig. 87).

(1) Symbol (where provided)

(2) Message

Phone

(where provided)

This screen repeats the information

displayed on the Uconnect™ system

while interacting with a paired phone.

The following information is shown:

Call status;

connected phone status (battery

state of charge, network reception,

incoming/outgoing call notification,

received text messages notification);

recent call list.

Driving the car in optimal conditions is

achieved when the letter "e" and the

graphic indication on the graphic bar

are shown in green in the middle of the

display screen.

Eﬃciency Coach

The system stores the last 10

received messages marked "read"

or "unread". The user can select the

desired message using the steering

87

P2000247

Settings

This screen allows the user to

customize the information and

notifications on the display and the

various functions of the car.

wheel controls

/

and open it by

Brake

Accel.

pressing the OK button on the steering

wheel.

86

P2000452

Refer to the "Multimedia" section for

more information.

NOTE The tachograph components are

illustrated below. The menus may vary

depending on the equipment of the car.

55

NOTE Some settings may be managed

using the Uconnect™ system (see

"Settings" in the "Vehicle mode"

paragraph in the "Multimedia" section).

Display

Acoustic alert volume: off, low

level, medium level, high level.

Intelligent Speed Limiter:

confirmation, automatic.

Traffic Sign Assist: enable,

disable.

Traffic Sign Assist alert: off,

visual, visual and acoustic.

New speed limit zone detection:

off, visual, visual and acoustic.

Autonomous Emergency

Braking Control (AEB Control):

off/active braking with alert.

Autonomous Emergency

Braking Control (AEB Control)

sensitivity: near/medium/far.

Park Assist: acoustic, acoustic

and visual.

Cornering lights: enable,

disable.

Dipped beam auto power off:

enable, disable.

Doors & Locks

Screen Setup: customisation of

the bottom left corner, centre and

bottom right corner of the display

(external temperature, date, time,

compass, odometer, audio info,

phone info).

Dimmer: screen brightness.

Reset trip B (never/always/every

2h/every 8h).

Automatic locking: enable,

disable.

Automatic unlock on exit:

enable, disable.

Dipped beam when closing:

enable/disable.

Remote door unlocking: all

doors, driver doors.

Passive Entry: enable, disable.

Start pairing process: start the

procedure.

Engine shutdown procedure: start

the procedure.

See phone: enable/disable.

See navigation: enable/disable.

Units of measurement: metric/

imperial.

Customisable sizes: Speed, Distance,

Consumption, Pressure, Temperature.

Date and Time

Volume Rear Park Assist: near,

medium, far.

Attention Assist warning:

enable, disable.

Time adjustment.

Mirrors and windscreen wipers

Rain sensor: enable, disable.

Lights

Format adjustment: 12

hours/24 hours.

Date setting.

Dipped beam sensitivity: 1 to 3.

Follow me Home: 0, 30, 60, 90

seconds.

Safety

Passenger AIRBAG.

Seat belt buzzer:

Automatic main beam: enable,

disable.

DRL (Daytime Running Lights):

enable, disable.

enable/disable.

Speed beep: volume

adjustment.

Safety / Assistance

56

completely, a Fiat Dealership is obliged

to run tests and, if necessary, road

tests which may also require a long

journey.

EOBD SYSTEM

(European On

Board Diagnosis)

(where provided)

OPERATION

The EOBD (European On Board

Diagnosis system) carries out

a continuous diagnosis of the

components of the car related to

emissions.

It also alerts the driver, by switching on

warning light on the instrument

the

panel, when these components are no

longer in peak condition (see “Warning

lights and messages” paragraph in this

chapter).

The aim of the EOBD system

(European On Board Diagnosis) is to:

monitor system efficiency;

indicate an increase in emissions;

indicate the need to replace

damaged components.

The car also has a connector, which

can interface with appropriate tools,

that makes it possible to read the error

codes stored in the electronic control

units together with a series of specific

parameters for engine operation and

diagnosis. This check can also be

carried out by the traffic police.

WARNING After eliminating the

anomaly, to check the system

57

KNOWING THE INSTRUMENT PANEL -> DISPLAY for Your Fiat Tipo 4 Door Second Generation (2015-2026)

Related Topics

KNOWING THE INSTRUMENT PANEL

Popular Owner Manuals

Latest Owner Manuals