Get Locks and Security -> Anti-theft system Guide for Ford Edge SUV First Generation (2007-2014)

The anti-scan feature will turn off after:

• one minute of keypad inactivity.

• pressing the

control on the remote entry transmitter portion of

your Integrated Keyhead Transmitter.

• the ignition is turned on.

Unlocking and locking the doors using keyless entry

To unlock the driver’s door, enter the factory set 5-digit code or your

personal code. Each number must be pressed within five seconds of each

other. The interior lamps will illuminate. Note: If the two-stage unlocking

feature is disabled, all doors will unlock; for more information regarding

two-stage unlocking, refer to the Unlocking the doors/Two stage unlock

section earlier in this chapter.

To unlock all doors, enter the factory set code or your personal code,

then press the 3 • 4 control within five seconds.

To lock all doors, press and hold the 7 • 8 and the 9 • 0 at the same

time (with the driver’s door closed). You do not need to enter the

keypad code first.

SECURILOCK姞 PASSIVE ANTI-THEFT SYSTEM

SecuriLock威 passive anti-theft system is an engine immobilization

system. This system is designed to help prevent the engine from being

started unless a coded integrated keyhead transmitter (IKT)

programmed to your vehicle is used. The use of the wrong type of

coded key may lead to a “no-start” condition.

Your vehicle comes with two coded integrated keyhead transmitters;

additional coded IKTs may be purchased from your authorized dealer.

Standard SecuriLock威 keys without remote entry transmitter

functionality can also be purchased from your authorized dealer if

desired. The authorized dealer can program your spare IKTs to your

vehicle or you can program the IKTs yourself. Refer to Programming

spare keys for instructions on how to program the coded key.

Note: The SecuriLock威 passive anti-theft system is not compatible with

non-Ford aftermarket remote start systems. Use of these systems may

result in vehicle starting problems and a loss of security protection.

Note: Large metallic objects, electronic devices that are used to

purchase gasoline or similar items, or a second coded key on the same

key chain may cause vehicle starting issues. You need to prevent these

objects from touching the coded IKT while starting the engine. These

Locks and Security

116

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

objects will not cause damage to the coded IKT, but may cause a

momentary issue if they are too close to the IKT when starting the

engine. If a problem occurs, turn the ignition off, remove all objects on

the key chain away from the coded IKT and restart the engine.

Note: Do not leave a duplicate coded key in the vehicle. Always

take your keys and lock all doors when leaving the vehicle.

Anti-theft indicator

The anti-theft indicator is located in the instrument panel cluster.

• When the ignition is in the off

position, the indicator will flash

once every two seconds to

indicate the SecuriLock威 system

is functioning as a theft

deterrent.

• When the ignition is in the on position, the indicator will glow for

three seconds to indicate normal system functionality.

If a problem occurs with the SecuriLock威 system, the indicator will flash

rapidly or glow steadily when the ignition is in the on position. If this

occurs, turn the ignition off then back to on to make sure there was no

electronic interference with the programmed key. If the vehicle doesn’t

start, try to start it with the 2nd programmed key and if successful

contact your authorized dealership for key replacement. If the indicator

still flashes rapidly or glows steadily, the vehicle will not start, contact

your authorized dealer as soon as possible for service.

Automatic arming

The vehicle is armed immediately after switching the ignition to the off

position.

The theft indicator will flash every

two seconds to act as a theft

deterrent when the vehicle is

armed.

Automatic disarming

The vehicle is disarmed immediately after the ignition is turned to the on

position.

The theft indicator will illuminate for three seconds and then go out. If

the theft indicator stays on for an extended period of time or flashes

rapidly, contact your authorized dealer as soon as possible.

Locks and Security

117

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Replacement integrated keyhead transmitters (IKT) and coded keys

Note: Your vehicle comes equipped with two integrated keyhead

transmitters (IKTs). The IKT functions as both a programmed ignition

key that operates all the locks and starts the vehicle, as well as a remote

keyless entry transmitter. A maximum of eight coded keys can be

programmed to your vehicle; only four of these eight keys can be IKTs

with remote entry functionality.

If your IKTs or standard SecuriLock威 coded keys are lost or stolen and

you don’t have an extra coded key, you will need to have your vehicle

towed to an authorized dealer. The key codes need to be erased from

your vehicle and new coded keys will need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own integrated keyhead transmitters or standard

SecuriLock威 coded keys to your vehicle. This procedure will program

both the engine immobilizer keycode and the remote entry transmitter

portion of the IKT to your vehicle. Note: A maximum of eight coded

keys can be programmed to your vehicle; only four of these eight can be

IKTs with remote entry functionality.

Tips:

• Only use integrated keyhead transmitters (IKTs) or standard

SecuriLock威 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

Locks and Security

118

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Please read and understand the

entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least three seconds, but no more than 10 seconds.

3. Turn the ignition to the 1 (off) position and remove the first coded

key from the ignition.

4. After three seconds but within 10 seconds of turning the ignition to

the 1 (off) position, insert the second previously coded key into the

ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least three seconds, but no more

than 10 seconds.

6. Turn the ignition to the 1 (off) position and remove the second

previously programmed coded key from the ignition.

7. After three seconds but within 20 seconds of turning the ignition to

the 1 (off) position and removing the previously programmed coded

key, insert the new unprogrammed key (new key/valet key) into the

ignition.

8. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least six seconds.

9. Remove the newly programmed coded key from the ignition.

If the key has been successfully programmed it will start the vehicle’s

engine and will operate the remote entry system (if the new key is an

integrated keyhead transmitter). The theft indicator light will illuminate

for three seconds and then go out to indicate successful programming.

If the key was not successfully programmed, it will not start your

vehicle’s engine and/or will not operate the remote entry features. The

theft indicator light may flash on and off. Wait 20 seconds and you may

repeat Steps 1 through 8. If failure repeats, bring your vehicle to your

authorized dealer to have the new key(s) programmed.

To program additional new unprogrammed key(s), wait 20 seconds and

then repeat this procedure from Step 1.

Locks and Security

119

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

Locks and Security -> Anti-theft system for Your Ford Edge SUV First Generation (2007-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals